0-58770-420 | Reliance Electric FlexPak Regulator Board

Description 

The 0-58770-420 is a version 4.2 regulator board used in most models of Reliance Electric FlexPak 3000 Digital DC Drives. It is one of the later versions of FlexPak 3000 regulator boards and is backwards compatible to prior versions of FlexPak regulator board.

Technical Specifications 

Information About 0-58770-420

The possible interface points to this board are available for signals in reference, feedback, and metering. It’s able to be controlled locally by the Operator Interface Module (OIM) keypad, or remotely by using the terminals at the regulator board terminal strip. Operators are able to select one of the following active control sources using the Control Source Select key, which features options such as Keypad, TERMBLK (a regulator board terminal strip), Network, and Serial.

The 0-58770-420 Regulator Board is installed with these steps. The 0-58770-420 needs to be powered on before installation. An operator can use the Control and Configuration software, CS3000, to save the 0-58770-420 board’s configuration to a remotely connected personal computer. Perform a quick start procedure, which will allow you to review the system parameters that need to be recorded.

In order to properly remove the 0-58770-420 regulator board, power it the drive it is installed into, then disconnect and tag the drive. Remove the OIM covering, and then disconnect the cable connector from the lower left side of the 0-58770-420. Disconnect the wire leads from the board as well, and then disconnect the ribbon cables.

Manufacturer information

Reliance Electric, a pioneering electrical equipment manufacturer, was founded in 1904. Acquired by Rockwell Automation, it specialized in motors, drives, and industrial automation solutions. Known for innovation, Reliance played a key role in advancing industrial technology.

IQElectro 2 Year Warranty

IQElectro offers a 2-Year Warranty on all our products. This complimentary two-year warranty ensures that every purchase from IQElectro is a secure investment in the future of your company.
Warranty Terms and Conditions

IQElectro is not an authorized distributor.

IQElectro LLC (IQElectro) is NOT an Authorized Distributor or in any way affiliated with Rockwell Automation, Siemens, or any other Manufacturers. IQElectro is NOT an Authorized Dealer of this product. The product may be of older version, date codes, or design than that available from authorized dealers. As IQElectro is not an authorized dealer of this product, the Original Manufacturer's Warranty and Support DO NOT apply. IQElectro sells SURPLUS only and DOES NOT SELL SOFTWARE or FIRMWARE licenses. Some hardware products may contain software and firmware and may not be legally operated without first obtaining an appropriate license from the manufacturer. IQElectro makes no representation as to whether a product will or will not have software or firmware and, if it does, whether the software or firmware is the revision level that you need for your application. IQElectro also makes no representations as to your ability or right to download or otherwise obtain software or firmware for the product from the Original Manufacturer, its distributors, or any other source. IQElectro also makes no representations as to your right to install any such software or firmware on the product. IQElectro will not obtain or supply software or firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing software or firmware. Customer acknowledges and agrees that IQElectro DOES NOT provide any software, firmware, operating system, or right-to-use licenses with the products it sells. Customers understand and agree that proper software (firmware) licensing, maintenance, and upgrades are subject to the applicable manufacturer's Licensing Agreement or similar document. Disclaimer Policy.