1203-GU6 | Allen-Bradley DeviceNet to SCANport Comm. Adapter, Enhanced, 24VDC, A

Description 

The 1203-GU6 communications module from Allen-Bradley can communicate with different Allen-Bradley drives through a SCANport cable and sometimes through datalinks. The module is powered by a supply input voltage of 85 to 264 Volts AC with One (1) SCANport and One (1) DeviceNet communication port.

Technical Specifications 

Information About 1203-GU6

The 1203-GU6 is an Enhanced DeviceNet communication module manufactured by Allen-Bradley that is utilized to establish link between SCANport communication enabled devices and DeviceNet network or devices as well. The module converts or interprets DeviceNet messages to SCANport language or message that may be used by the product as information or operational data and parameter.

The Enhanced DeviceNet module has Two (2) ports found on the front panel of the module that are intended for SCANport and DeviceNet connection. The SCANport terminal is designed with an 8-Pin female mini-DIN connector while the DeviceNet port is a 5-Pin or 10-Pin connector that is supplied with the module.

This module is installed to a DIN rail and powered by an external voltage of 24VDC. This module has a physical dimension of 1.8" W x 3.0" H x 5.0" D or 4.57 cm x 7.62 cm x 12.7 cm. Provide clearance when installing this module to allow natural air flow and wiring activities.

Supported devices of this module must have a SCANport communication port. These devices include

1305 AC MICRO Drive, 1336 IMPACT Drive, 1336 PLUS AC Drive, 1336 PLUS II Drive, 1336 FORCE Drive, 1394 AC Multi-Axis Motion Control System, SMC Dialog Plus, SMP-3 Smart Motor Protector, 1397 Digital DC Drive, and 1557 Medium Voltage Drive.

It also supports Change of State (COS) function to optimize the data update of the module by reporting only new data.

The 1203-GU6 communications module by Allen-Bradley is a SCANport communications module that can be used as a communication interface device on multiple Allen-Bradley drives. It should only be installed, configured, tested, and repaired by technicians who are experts with SCANport devices. All power should be disconnected from the SCANport drive before the 1203-GU6 communications module is installed. The 1203-GU6 communications module can be mounted on a DIN Rail base and connect to its intended SCANport device using a SCANport cable. This communications module enables DeviceNet connection by terminating a DeviceNet cable to the 5-pin Phoenix connector. This communication module has DIP switches that are turned ON and OFF to define the module’s operation settings. The Allen-Bradley 1203-GU6 communications module can use a 5-pin or a 10-pin plug-in connector to attach the DeviceNet cable. The factory default settings for this module include a node address of 63, a 125K DeviceNet data rate, and 16-bit logic command/status and reference/feedback enabled for polling. DIP switch positions should be aligned with the proper operation with consideration to machine safety operation. The 1203-GU6 communications module operates at a temperature between 32- and 122-degrees Fahrenheit and 0 to 95% non-condensing relative humidity levels. It can be protected by an enclosure with a NEMA Type 1 or IP 30 protection rating.

Manufacturer information

Allen‑Bradley components, integrated control and information solutions are built for demanding industrial applications. We integrate control and information across the enterprise to make you as productive as possible.

IQElectro 2 Year Warranty

IQElectro offers a 2-Year Warranty on all our products. This complimentary two-year warranty ensures that every purchase from IQElectro is a secure investment in the future of your company.
Warranty Terms and Conditions

IQElectro is not an authorized distributor.

IQElectro LLC (IQElectro) is NOT an Authorized Distributor or in any way affiliated with Rockwell Automation, Siemens, or any other Manufacturers. IQElectro is NOT an Authorized Dealer of this product. The product may be of older version, date codes, or design than that available from authorized dealers. As IQElectro is not an authorized dealer of this product, the Original Manufacturer's Warranty and Support DO NOT apply. IQElectro sells SURPLUS only and DOES NOT SELL SOFTWARE or FIRMWARE licenses. Some hardware products may contain software and firmware and may not be legally operated without first obtaining an appropriate license from the manufacturer. IQElectro makes no representation as to whether a product will or will not have software or firmware and, if it does, whether the software or firmware is the revision level that you need for your application. IQElectro also makes no representations as to your ability or right to download or otherwise obtain software or firmware for the product from the Original Manufacturer, its distributors, or any other source. IQElectro also makes no representations as to your right to install any such software or firmware on the product. IQElectro will not obtain or supply software or firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing software or firmware. Customer acknowledges and agrees that IQElectro DOES NOT provide any software, firmware, operating system, or right-to-use licenses with the products it sells. Customers understand and agree that proper software (firmware) licensing, maintenance, and upgrades are subject to the applicable manufacturer's Licensing Agreement or similar document. Disclaimer Policy.