1305-BA09A | Allen-Bradley AC Variable Speed Drive 380-460V 9A Motor: 4KW/5HP

Description 

The 1305-BA09A is a product of Allen-Bradley that belongs to the bulletin 1305 adjustable AC Drive. It has a rated Input voltage of 380/460V, 3-Phase and with an output power of 4.0 kW (5.0 HP) and output current of 9.0 A.

Technical Specifications 

Information About 1305-BA09A

The 1305-BA09A is an industrially approved electronic component that is used for controlling the speed of an AC motor. This is Allen-Bradley’s solution to allow implementation of a more sophisticated control to increase the accuracy of control and operability. This product is commercially termed by Allen-Bradley as Adjustable Frequency AC drives but more generally known as Variable Frequency Drive (VFD) or Variable Speed Drive (VSD). With this VFD hardware, the operator is given an option to control the motor by interfacing electrical signaling components to the drive through it’s embedded I/O channels. As the individual channels are triggered with the required signal, the drive executes the parameter that is assigned to it to control the motor. Some of the common assignable parameters to the Drive are START / STOP, JOG, FORWARD / REVERSE of a motor, dictate operation location such as REMOTE / LOCAL and control mode such as AUTOMATIC / MANUAL. This will be done by programming the embedded Eight (8) Discrete Inputs to the mentioned parameters. Two (2) Analog Inputs are intended for assignment as Frequency Reference which when provided with 0 to 10-VDC or 4-20mA signals, enables modification of speed. Two (2) Discrete Outputs are programable to report the drive’s status similar to motor operation state such as Faulted or Running. One (1) Analog Output is also provides which is commonly used to feedback the speed of the drive. It also has One (1) Potentiometer input which generally functions the same as the analog input. The enable the drive, terminate a 3-Phas, 380/460V.AC supply to the input power lines of the drive. The drive then produces an output voltage of 0-460VAC, 3-Phase which shall be wired to the motor leads. Along with the voltage output is the power rating of 9.0 Amperes and 5.0 Horsepower. The Allen-Bradley 1305-BA09A adjustable frequency AC drive allows the users to adjust the speed of 3-phase induction motors. The 1305-BA09A possesses similar specifications to most members of its series. The 1305-BA09A has a motor rating power of 4.0 kilowatts (5.0 Horsepower) which is a 3-phase motor with a 9.0 Amps output current. The 1305-BA09A has an output voltage range of 0 to 460 Volts, programmable output frequency output range of 0-400Hz while the SCANport load is rated at up to 250 milliamps. The 1305-BA09A is compatible with Human Interface Module (HIM) such as the Allen-Bradley 1201-HA1 and 1201-HA2 which can be used to enter settings and parameters. The Allen-Bradley 1305-BA09A drive has an operating voltage range between 340 to 500 Volts AC and an input KVA rating of 7 KVA. It has a power dissipation of 107 Watts, with a working efficiency rating of 97.5%. The 1305-BA09A has a NEMA standard type 1 (IP30) enclosure and an enclosure temperature of around 50 degrees Celsius. The 1305-BA09A comes with a storage temperature range between 40 degrees Celsius and 70 degrees Celsius, and with a 0 to 95% (non-condensing) relative humidity range. The 1305-BA09A can maintain an operational vibration rating of up to 1.0 g. The 1305-BA09A has an external potentiometer speed of 10 K-ohms at 1 Watt, and an impedance of 100 K-ohms per 10-bit resolution. The 1305-BA09A has product dimensions of 210 millimeters (8.27 inches) x 195 millimeters (7.67 inches) x 175 millimeters (7.05 inches), with a weight of 4.2 kilograms (9.2 pounds).

Manufacturer information

Allen-Bradley, a brand of Rockwell Automation, specializes in manufacturing industrial automation equipment. The product range includes programmable logic controllers (PLCs), motion control systems, safety devices, motor control equipment, automation software, and HMI panels. Allen-Bradley products are known for their reliability and integration with other systems.