1398-DDM-019 | Allen-Bradley ControlLogix 8 Axis SERCOS Servo Module

Description 

The Allen-Bradley 1398-DDM-019 is part of the Ultra 100 Series family of digital servo drives. This drive is a microprocessor-based motor controller and comes with a peak output current of 30 A; continuous output current of 10 A; and continuous output power of 2.0 kW. It operates at a supply input voltage of 100-240VAC, 1-Phase with voltage range of 88-265 VAC along an input frequency of 47-63 Hz. This drive comes with an RS232 communication interface for direct communication with programming workstation.

Technical Specifications 

Information About 1398-DDM-019

The Allen-Bradley 1398-DDM-019 is a digital servo drive that is used for motion control applications. This drive mainly operates at 1-Phase, 100-240VAC nominal voltage input with voltage range of 88-265 VAC. This drive is capable of implementing Torque, position and velocity control with maximum bandwidth of 300 Hz for Velocity loop; 1 ms speed for position loop and 125 ms for current loop.

The 1398-DDM-019 is a microprocessor-based controller that is also capable of communicating with programming workstations via the provided RS232 / RS454 interface to the digital servo drive. This serial port supports transmission speed of 1200 - 19200 baud and capable of being networked with up to 32 1398 Digital Servo Drive.

The 1398-DDM-019 has operating temperature of -5ºC to 55ºC (23ºF to 131ºF) and storage temperature of -40ºC to 70ºC (-40ºF to 158ºF) with relative humidity of 5% to 90%, non-condensing. It has a working altitude of 1500m (5000 ft) and operating vibration of 10 to 2000 Hz at 2g; operating shock of 15g, 11 ms, half sine. This digital servo drive weighs 2.0 kg (4.4 lb)3.

The 1398-DDM-019 digital servo drive has 4 optically isolated, 12 to 24 volt, active high discrete inputs; 2 optically isolated, 12 to 24 volt, active high, short circuit protected discrete outputs; Dedicated digital inputs; dedicated relay outputs; 1 analog input; 1 analog output; 1 encoder output with 1 MHz maximum line frequency. This drive accepts an incremental encoder as motor feedback.

The Allen-Bradley 1398-DDM-019 is a drive module with a continuous output power of 2 kW. This module belongs to the Allen-Bradley ULTRA 200 series. It features the IPM (Intelligent Power Module) technology. The IPM technology produces high-frequency outputs so that the PWM (Pulse Width Modulation) can give the drive loop current, overcurrent, short circuit, and over-temperature protection. The 1398-DDM-019 module has an internally-shielded filter that protects the module from electromagnetic distortion. There is a built-in power supply in this module. There is also an encoder output which produces maximum performance and lets the output be selected according to the available encoder resolution. This output is able to divide the encoder signal on the motor into factors of 1, 2, 4, or 8. Just like any other version, this module also has multiple protection circuits. There is autotuning technology in the 1398-DDM-019 module that makes the drive automatically adjust without any setup. This module has more cooling fans than other Allen-Bradley ULTRA 200 modules. Its required fuse size is 20A and its required wire size is 12 millimeters (AWG).

The weight of the Allen-Bradley 1398-DDM-019 drive is 2 kilograms. Its operating temperature ranges from 0 to 50 degrees Celsius. The signal output power of this drive module is 5 Volts DC. The analog input of this module uses a 10-bit resolution. The input voltage in the 1398-DDM-019 module is 100 to 240 Volts AC RMS nominal. The peak output current is 30 Amps and the peak input current is 18 Amps. The users need to make sure that they always follow the instructions in the module’s manual.

Manufacturer information

Allen‑Bradley components, integrated control and information solutions are built for demanding industrial applications. We integrate control and information across the enterprise to make you as productive as possible.

IQElectro 2 Year Warranty

IQElectro offers a 2-Year Warranty on all our products. This complimentary two-year warranty ensures that every purchase from IQElectro is a secure investment in the future of your company.
Warranty Terms and Conditions

IQElectro is not an authorized distributor.

IQElectro LLC (IQElectro) is NOT an Authorized Distributor or in any way affiliated with Rockwell Automation, Siemens, or any other Manufacturers. IQElectro is NOT an Authorized Dealer of this product. The product may be of older version, date codes, or design than that available from authorized dealers. As IQElectro is not an authorized dealer of this product, the Original Manufacturer's Warranty and Support DO NOT apply. IQElectro sells SURPLUS only and DOES NOT SELL SOFTWARE or FIRMWARE licenses. Some hardware products may contain software and firmware and may not be legally operated without first obtaining an appropriate license from the manufacturer. IQElectro makes no representation as to whether a product will or will not have software or firmware and, if it does, whether the software or firmware is the revision level that you need for your application. IQElectro also makes no representations as to your ability or right to download or otherwise obtain software or firmware for the product from the Original Manufacturer, its distributors, or any other source. IQElectro also makes no representations as to your right to install any such software or firmware on the product. IQElectro will not obtain or supply software or firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing software or firmware. Customer acknowledges and agrees that IQElectro DOES NOT provide any software, firmware, operating system, or right-to-use licenses with the products it sells. Customers understand and agree that proper software (firmware) licensing, maintenance, and upgrades are subject to the applicable manufacturer's Licensing Agreement or similar document. Disclaimer Policy.