1494V-DS200 | Allen-Bradley Disconnect Switch, 200A, Right Handed, Non-Fusible

The 1494V-DS200 is a disconnect switch kit from Allen-Bradley’s 1494V series. It serves as the core switching mechanism in a flange-mounted disconnect system for motor control centers or industrial panels. The kit is rated for 200 A and supports both AC and DC applications. It allows safe disconnection of loads during maintenance or emergency shutdown. The operating handle and connecting rod are not included and must be ordered separately. The kit meets UL, CSA, and NEMA standards for performance and safety.

No, the handle must be ordered separately. The 1494V-DS200 kit includes only the core switch mechanism. Allen-Bradley offers several compatible handles: the 1494V-H1 (Type 1, 3, 3R, 12), 1494V-W1 (Type 4/4X), and 1494V-R1 (right flange only, Type 4/4X). This modular approach allows customization based on enclosure type and environmental protection requirements. Users should select the handle based on desired protection class and mounting position. The handle and rod must match the enclosure depth and mounting orientation.

Two connecting rods are available: 1494V-RA1 for enclosure depths from 172 to 232 mm, and 1494V-RA2 for 232 to 585 mm. These rods link the handle to the switch mechanism and are essential for proper mechanical operation. Selecting the correct rod ensures accurate and low-resistance actuation. The rods are built for durability and maintain proper alignment. Installation is straightforward using standard tools. Proper selection prevents mechanical failure or misalignment.

The switch operates in temperatures from –20°C to +60°C, suitable for indoor industrial environments. It can tolerate moderate fluctuations in temperature without affecting switching performance. This range supports typical factory floor, warehouse, and control room conditions. Enclosures should offer suitable ventilation or climate control in extreme settings. The operating range ensures thermal stability of contacts and mechanisms. Always check derating guidelines for hotter environments.

No, the Allen-Bradley 1494V-DS200 has been officially discontinued since May 31, 2019, and is no longer available from Rockwell Automation. Customers are advised to remove references to this model in all new designs and upgrades. Although limited stock might still exist in aftermarket channels, it is no longer supported for new deployments. For ongoing applications, Rockwell recommends transitioning to the 1494U series, which offers enhanced features and easier installation. Keeping discontinued parts in use may pose risks related to support, compliance, and repair delays. Always consult official documentation to confirm lifecycle status and upgrade paths.