14C300 | Reliance Electric FlexPak Plus 10HP 230V Drive

Description 

The D-C FlexPak Plus series includes part number 14C300. This controller is manufactured by Reliance Electric.

Technical Specifications 

Information About 14C300

For this controller only, the regulator board is set up for use with 24 VDC main contactors having a coil resistance greater than or equal to 100 ohms. 14C300 has a rated horsepower range of 10, and the VAC at 60Hz is 230. The A-C Amps (RMS) rating maxes out at 38, the amp. maximum is 5, and the power supply capacity is 5000. The D-C armature is 240 volts and the D-C armature averages 72 amperes. The D-C field is rated at 150 volts. The transformer for this controller has a maximum kVA of between 30 and 80, and a rated kVA of between 6 and 16. Important: For proper operation of the controller, the minimum required kVA size is 15 kVA.

When installing the controller, mount the chassis on a vertical surface. You must leave at least 4 inches of clearance between controllers, including top, bottom, and all sides. The unobstructed area allows for proper air circulation through the heat sink. Under no circumstances should you ever place a controller directly in a corner. The user is responsible for providing ambient temperatures of between 32°F and 131°F, which meet the controller specifications. Relative humidity must be kept between 5-95% without condensation.

Caution: The drive will not start if external overload devices are not connected between terminals 32, 33, 34, and 132. Do not allow conductors to ground on the drive. Personal injury could result if a bare wire touches the chassis.

Manufacturer information

Reliance Electric, a pioneering electrical equipment manufacturer, was founded in 1904. Acquired by Rockwell Automation, it specialized in motors, drives, and industrial automation solutions. Known for innovation, Reliance played a key role in advancing industrial technology.

IQElectro 2 Year Warranty

IQElectro offers a 2-Year Warranty on all our products. This complimentary two-year warranty ensures that every purchase from IQElectro is a secure investment in the future of your company.
Warranty Terms and Conditions

IQElectro is not an authorized distributor.

IQElectro LLC (IQElectro) is NOT an Authorized Distributor or in any way affiliated with Rockwell Automation, Siemens, or any other Manufacturers. IQElectro is NOT an Authorized Dealer of this product. The product may be of older version, date codes, or design than that available from authorized dealers. As IQElectro is not an authorized dealer of this product, the Original Manufacturer's Warranty and Support DO NOT apply. IQElectro sells SURPLUS only and DOES NOT SELL SOFTWARE or FIRMWARE licenses. Some hardware products may contain software and firmware and may not be legally operated without first obtaining an appropriate license from the manufacturer. IQElectro makes no representation as to whether a product will or will not have software or firmware and, if it does, whether the software or firmware is the revision level that you need for your application. IQElectro also makes no representations as to your ability or right to download or otherwise obtain software or firmware for the product from the Original Manufacturer, its distributors, or any other source. IQElectro also makes no representations as to your right to install any such software or firmware on the product. IQElectro will not obtain or supply software or firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing software or firmware. Customer acknowledges and agrees that IQElectro DOES NOT provide any software, firmware, operating system, or right-to-use licenses with the products it sells. Customers understand and agree that proper software (firmware) licensing, maintenance, and upgrades are subject to the applicable manufacturer's Licensing Agreement or similar document. Disclaimer Policy.