150-C135NBD | Allen-Bradley SMC-3 Motor Controller 135A, 480VAC, 100-240VAC

Description 

The Allen-Bradley 150-C135NBD is a SMC-3 Smart Motor Controller. This motor controller has a line Voltage of 200-480VAC and control Voltage of 100-240VAC. It delivers maximum continuous current of 135 A and output power ratings such as 40 Hp for 200VAC; 50 HP for 230VAC and 100 HP for 460 VAC when operated as line controller and 75 kW for 200VAC; 110 kW for 230VAC and 132 kW for 460 VAC when operated as Delta controller.

Technical Specifications 

Information About 150-C135NBD

The Allen-Bradley 150-C135NBD is a SMC-3 Flex Smart Motor Controller. This smart motor controller is a compact, small-form factor device that is equipped with advanced functionalities for implementing a variety of operating modes such as Soft Start, Current Limit Start, Selectable Kickstart, Dual Ramp Star, Full Voltage Start, Preset Slow Speed, Linear Speed Acceleration, Coast-to-rest, Smart motor braking among others.

The 150-C135NBD may be a 3-Phase device, supplied with line voltage range of 200-480 VAC with control voltage of 100-240VAC. When operating as a line controller, the maximum continuous output current is 135 Amperes and delivers output power of 40 HP when operated at 200VAC; 50 HP at 230VAC and 100 HP at 460 VAC. When operating as a Delta controller, the maximum continuous output of the 150-C135NBD is 75 HP at 200VAC; 75 HP at 230 VAC and 150 HP at 460 VAC.

The 150-C135NBD has an open-style enclosure therefore, this device is required to be mounted inside an enclosure that provides adequate protection against environmental and mechanical factors that may affect the operation and lifespan of the smart motor controller. Appropriate enclosure rating is IP65 (Type 4/12) for non-combination installation, the minimum enclosure size of 762 mm x 610 mm x 305 mm (HxWxD). For combination controllers with fusible disconnect, the minimum enclosure size is 965 mm x762 mm x 356 mm (HxWxD). For Combination controllers with circuit breakers, minimum enclosure size is 965 mm x 762 mm x 356 mm (HxWxD). Additionally, mounting clearance must be included in the installation of this controller. Recommended clearance top and bottom clearance is as 15 cm.

Before and during a start, the 150-C135NBD controller will conduct a self-test to see if there are any shorted SCRs. If so, the start will be aborted and the LED indicator will signal a fault to prevent possible damage from phase imbalance. The phase imbalance is also monitored by the controller and when this imbalance exceeds the specified limits, it will indicate a fault and the unit will trip. To prevent motor burnout, the 150-C135NBD controller will not start up when it detects only a single-phase.

The Allen Bradley 150-C135NBD SMC-3 is a 3-Wire Smart Motor Controller with Open Enclosure. This module has a current rating of 135 A and a rated voltage of 200-460V AC. It has an input voltage of 200-460V AC, 3-Phase, 50/60 HZ and a control voltage of 100-240V AC. Each module features Delta Compatibility.

Manufacturer information

Allen‑Bradley components, integrated control and information solutions are built for demanding industrial applications. We integrate control and information across the enterprise to make you as productive as possible.

IQElectro 2 Year Warranty

IQElectro offers a 2-Year Warranty on all our products. This complimentary two-year warranty ensures that every purchase from IQElectro is a secure investment in the future of your company.
Warranty Terms and Conditions

IQElectro is not an authorized distributor.

IQElectro LLC (IQElectro) is NOT an Authorized Distributor or in any way affiliated with Rockwell Automation, Siemens, or any other Manufacturers. IQElectro is NOT an Authorized Dealer of this product. The product may be of older version, date codes, or design than that available from authorized dealers. As IQElectro is not an authorized dealer of this product, the Original Manufacturer's Warranty and Support DO NOT apply. IQElectro sells SURPLUS only and DOES NOT SELL SOFTWARE or FIRMWARE licenses. Some hardware products may contain software and firmware and may not be legally operated without first obtaining an appropriate license from the manufacturer. IQElectro makes no representation as to whether a product will or will not have software or firmware and, if it does, whether the software or firmware is the revision level that you need for your application. IQElectro also makes no representations as to your ability or right to download or otherwise obtain software or firmware for the product from the Original Manufacturer, its distributors, or any other source. IQElectro also makes no representations as to your right to install any such software or firmware on the product. IQElectro will not obtain or supply software or firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing software or firmware. Customer acknowledges and agrees that IQElectro DOES NOT provide any software, firmware, operating system, or right-to-use licenses with the products it sells. Customers understand and agree that proper software (firmware) licensing, maintenance, and upgrades are subject to the applicable manufacturer's Licensing Agreement or similar document. Disclaimer Policy.