150-C9NBR | Allen-Bradley | SMC-3 Motor Controller, 9A, 480V, 3-Phase, 24V AC/DC

Description 

The 150-C9NBR is a Soft Starter device from Allen-Bradley’s SMC-3 Smart Motor Controller product family. This is a solid-state controller with a current rating of 9 Amperes, Open type enclosure, 200-460V AC, 3-Phase, 50/60 Hz input line voltage, and control voltage of 24 VAC / VDC. This controller is capable of Soft Start, Current Limit Start, Selectable Kickstart, Coast-to-rest, and Soft Stop control methods.

Technical Specifications 

Information About 150-C9NBR

The 150-C9NBR is a Smart Motor Control that belongs to the SMC-3 series of Solid-State soft starter devices by Allen-Bradley. This device is mainly used to implement an efficient startup and shutdown as well as contribute to energy savings. This soft starter device is capable of being configured with a variety of control methods such as Soft Start, Current Limit Start, Selectable Kickstart, Coast-to-rest, and Soft Stop. Each of these control methods come with adjustable time settings particularly 2, 5, 10, 15, 20, 25, or 30 s for Start time, 15%, 25%, 35%, and 65% of locked rotor torque for initial Torque, 150%, 250%, 350%, and 450% of full load current (FLA) for current limit adjustment, 0, 0.5, 1.0, or 1.5 s for kick start and Off, 100%, 200%, or 300% of the start time setting when wired for soft stop. The 150-C9NBR is compatible for use with line-connected and delta-connected motors. It has output current ratings of 9 Amperes, input voltage rating of 200-460V AC, 3-Phase, 50/60 Hz, and control voltage of 24 VAC / VDC. It comes with an Open type enclosure and configurable overload class rating of 0, 15, or 20. It also has an integral DV/DT Protection rating of 1000V/µs and an overvoltage category of III. The 150-C9NBR has an operating temperature of -5…+50 °C (23…122 °F) when installed in an open environment and -5…+40 °C (23…104 °F) in the enclosed environment. It has an operating altitude of 2000 m (6560 ft) with a pollution degree of 2.

The Allen-Bradley 150-C9NBR is an SMC-3 solid-state smart motor controller used in various applications such as fans, compressors, lifts, conveyors, pumps, chillers, lifts, mixers, and many others. This 3-phase controller features five modes of operation, particularly current limit start, soft start, soft stop, kickstart, and coast-to-rest. Other features of this controller focus on protection including electronic motor overload protection, shorted SCR, phase reversal protection, phase imbalance, phase loss/open load, and over-temperature. The 150-C9NBR controller also has Delta compatibility and an open-type enclosure. This 3-wire controller has a reset button that can also be used as a hold-to-test button to check the controller for faults present. Its DIP switches allow the user to configure various settings of the controller, including its START/STOP profile. It also has a rotary switch that lets the user set up the motor FLA quickly. Also present is an LED status indicator showing the RUN, fault, and OFF statuses, with the fault type identified by the number of flashes made. It has a Hp of 0.75 to 2 at both 200 and 230 Volts AC and 1.5 to 5 at 460 Volts AC at a starting duty of 350% and 0.75 to 1.5 at 200 Volts AC, 0.75 to 2 at 230 Volts AC, and 1.5 to 3 at 460 Volts AC at a starting duty of 450%. Its current rating is 9 A and its range is from 3 to 9 A, its input line voltage is 200 to 480 Volts AC, 50/60 Hertz, and its control voltage is 24 Volts AC/DC. Its compact size allows it to be stacked together and create a modular control system. The Allen-Bradley 150-C9NBR is a motor controller from Allen-Bradley. Specifically, this is a Soft Starter, used with 3-Phase motors for implementing controlled starting and stopping of the motor. It is part of the SMC 3 Smart Motor Controllers (SMC) which support five (5) standard operations such as Soft Start; Selectable kickstart; Current limit start; Cost-to-rest and Soft Stop. The 150-C9NBR has a front panel installed with a rotary switch used for setting the controller overload setting. Selectable settings are 3 Amperes to 9 Amperes, in reference to the controller’s Full Load Current (FLA) rating. It also comes with a single LED indicator that indicates the error state of the controller. Overload is indicated by 1; Overtemperature by 2; Phase Reversal by 3; Phase Loss or Open load by 4; Phase imbalance by 5; Shorted SCR by 6, and Test status by 7. The front panel also has a writable area for writing the configured Overload value. It also has a dual function button located at the upper left of the controller that triggers Test when held or Reset the controller when pushed. The 150-C9NBR has a line voltage requirement of 200-460 Volts AC, 3-Phase with a frequency input of 50/60 Hertz. It also has a control voltage of 24 Volts AC/Volts DC and delivers an output current of 9 Amperes. It can be used for Line and Delta connected motors. It has an open-type enclosure and supports panel mounting via the provided mounting screws at the base of the controller. Mains input voltage is terminated to the terminal strip on top of the device while output wirings are terminated on the bottom terminal strip.

Manufacturer information

Allen‑Bradley components, integrated control and information solutions are built for demanding industrial applications. We integrate control and information across the enterprise to make you as productive as possible.

IQElectro 2 Year Warranty

IQElectro offers a 2-Year Warranty on all our products. This complimentary two-year warranty ensures that every purchase from IQElectro is a secure investment in the future of your company.
Warranty Terms and Conditions

IQElectro is not an authorized distributor.

IQElectro LLC (IQElectro) is NOT an Authorized Distributor or in any way affiliated with Rockwell Automation, Siemens, or any other Manufacturers. IQElectro is NOT an Authorized Dealer of this product. The product may be of older version, date codes, or design than that available from authorized dealers. As IQElectro is not an authorized dealer of this product, the Original Manufacturer's Warranty and Support DO NOT apply. IQElectro sells SURPLUS only and DOES NOT SELL SOFTWARE or FIRMWARE licenses. Some hardware products may contain software and firmware and may not be legally operated without first obtaining an appropriate license from the manufacturer. IQElectro makes no representation as to whether a product will or will not have software or firmware and, if it does, whether the software or firmware is the revision level that you need for your application. IQElectro also makes no representations as to your ability or right to download or otherwise obtain software or firmware for the product from the Original Manufacturer, its distributors, or any other source. IQElectro also makes no representations as to your right to install any such software or firmware on the product. IQElectro will not obtain or supply software or firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing software or firmware. Customer acknowledges and agrees that IQElectro DOES NOT provide any software, firmware, operating system, or right-to-use licenses with the products it sells. Customers understand and agree that proper software (firmware) licensing, maintenance, and upgrades are subject to the applicable manufacturer's Licensing Agreement or similar document. Disclaimer Policy.