150-F361NBD | Allen-Bradley SMC-Flex Solid State Controller 361A 100-240VAC

Description 

The Allen-Bradley 150-F361NBD is a SMC Flex Smart Motor Controller. This component is a solid-state controller that has input line voltage requirement of 200-460VAC, 3-Phase, 50/60 Hertz, Control Voltage of 100 to 240V AC (5 to 480 A units) with rated Current output of 361 amperes, rated power of 300 HP at 460VAC for Line connected and 500 HP at 460VAC for Delta Connection.

Technical Specifications 

Information About 150-F361NBD

The 150-F25NBD Smart Motor Controller (SMC) is manufactured by Allen-Bradley for implementing an efficient starting, stopping and control of motors , preventing damage due to operating stress to maximize the motor’s operational hours and save energy by reducing and preventing unwanted and unnecessary electrical signals. It belongs to the microprocessor and solid-state component of SMC-Flex family of motor management devices which may also be called as a soft starter.

An adequate wiring must be applied to this device. Proper wiring ang torque application reduces overheating to the soft starter’s terminals. As this is a device rated for 361 Ampere Current output, the recommended Lug kit for use is 199-LG1 with wire strip length of 18-25 mm. The appropriate conductor size range is 25 to 240 sq. mm or #6 to 250 MCM. For line side, a maximum no. of Two (2) Lugs per pole. Similarly, the Load side requires the same. When tightening, applied Torque shall for wire-Lug shall be 42 Nm or 275 lb/in. For Lug-Busbar termination, tightness shall be 28 Nm or 250 lb/in.

This soft starter has control terminals that contains the input wiring for the Control input power, Tachometer input, Ground Fault transformer input, Auxiliary contact #2, #3 and #4. Recommended wire sizes for control wiring are conductor range of 0.75…2.5 mm2 (18…14 AWG) and Torque of 0.6 Nm or 5 lb/in. The supply type to the control terminals are 1-Phase supply ranging from 100 to 240VAC.

The 150-F25NBD supports Line Connection with Isolation Contactor(Default Mode), Delta Connection with Isolation Contactor and Delta Connection with Shorted SCR Protection as optional wiring configurations.

The Allen-Bradley 150-F361NBD SMC-Flex is a Solid-State Controller that features an open enclosure and must be mounted in an enclosure during operation to provide safety protection. This module has a controller rating of 361 A, 300 Horsepower at 460 Volts AC and a rated voltage of 200 to 460 Volts AC. It has an input voltage of 200 to 460 Volts AC, 3-phase, 50 and 60 Hertz and a control voltage of 100 to 240 Volts AC (5 to 480 A units). The 150-F361NBD is equipped with a standard electronic overload protector. Trip reset can either be set on automatic or manual mode. The 150-F361NBD is equipped with LED lights that will indicate when there is a problem such as an overload, over temperature, phase imbalance and many others. The controller comes provided with both stall protection and jam detection. When installing, it is important to make sure there is a clearance of 6 inches above and below the controller, this allows for proper air flow. This controller’s Coil Voltage is 100 to 240 Volts AC, its Amperage Rating is 361 A, its Wattage is 110 to 355 kW at 50 Hertz. This modules Contact Configuration is 1NO 1NC (Programmable), its voltage rating is around 200 to 208 Volts AC, its HP Rating is 125 to 500 Horsepower at 60 Hertz. This unit requires an operating temperature range of -5 to 50 degrees Celsius while the storage and transportation temperature range is -25 to 75 degrees Celsius with a maximum altitude of 2000 meters. This module works best in a humidity range of 5 to 95% non-condensing.

Manufacturer information

Allen‑Bradley components, integrated control and information solutions are built for demanding industrial applications. We integrate control and information across the enterprise to make you as productive as possible.

IQElectro 2 Year Warranty

IQElectro offers a 2-Year Warranty on all our products. This complimentary two-year warranty ensures that every purchase from IQElectro is a secure investment in the future of your company.
Warranty Terms and Conditions

IQElectro is not an authorized distributor.

IQElectro LLC (IQElectro) is NOT an Authorized Distributor or in any way affiliated with Rockwell Automation, Siemens, or any other Manufacturers. IQElectro is NOT an Authorized Dealer of this product. The product may be of older version, date codes, or design than that available from authorized dealers. As IQElectro is not an authorized dealer of this product, the Original Manufacturer's Warranty and Support DO NOT apply. IQElectro sells SURPLUS only and DOES NOT SELL SOFTWARE or FIRMWARE licenses. Some hardware products may contain software and firmware and may not be legally operated without first obtaining an appropriate license from the manufacturer. IQElectro makes no representation as to whether a product will or will not have software or firmware and, if it does, whether the software or firmware is the revision level that you need for your application. IQElectro also makes no representations as to your ability or right to download or otherwise obtain software or firmware for the product from the Original Manufacturer, its distributors, or any other source. IQElectro also makes no representations as to your right to install any such software or firmware on the product. IQElectro will not obtain or supply software or firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing software or firmware. Customer acknowledges and agrees that IQElectro DOES NOT provide any software, firmware, operating system, or right-to-use licenses with the products it sells. Customers understand and agree that proper software (firmware) licensing, maintenance, and upgrades are subject to the applicable manufacturer's Licensing Agreement or similar document. Disclaimer Policy.