1606-XLE120E-2 | Allen-Bradley Essential Power Supply 24-28V DC 120W, 380-480V AC

Description 

The 1606-XLE120E-2 power supply module from Allen-Bradley/Rockwell Automation is a 3-phase Bulletin 1606 power supply module. It is also a switched mode type of Allen-Bradley power supply module. The 1606-XLE120E-2 3-phase power supply module has a steady-state input current rating of 0.68 Amps at a voltage rating of 400 to 480 Volts AC. Additionally, its output current rating is 5 Amps, its output power rating is 120 Watts, and its DC output voltage rating is 24 to 28 Volts DC. The input voltage ratings of the 1606-XLE120E-2 power supply module are 380 to 480 Volts AC and 600 Volts DC.

Technical Specifications 

Information About 1606-XLE120E-2

The Allen-Bradley 1606-XLE120E-2 power supply is a cost-optimized power supply from the XLE series. This 2-phase device has a rated output power of 120 Watts. The device has an active input transient filter and it works under a wide range of temperatures. It has all the basic functions needed in an SMPS (switched-mode power supply) device. It uses 2 phases of a 3-phase system which saves both wiring and installation costs. The device has a rated output voltage of 24 Volts DC. The 1606-XLE120E-2 power supply is a switched-mode power supply that makes use of MOSFETs that continuously turn on and off at high frequency and energy storage devices. The output current of the device stands at 5 Amps. The device does not generate much heat because it is so efficient.

The 1606-XLE120E-2 power supply has peak current capabilities. The power supply can deliver a peak current which is higher than the specified short-term current. This helps to start current-demanding loads or to safely operate subsequent circuit breakers. The device has advanced protection features. It is electronically protected against overload, no-load, and short circuit situations. If there is an internal supply defect, a redundant circuit limits the maximum output voltage. The 1606-XLE120E-2 power supply is also protected against an excessive temperature. If an excessive temperature is detected, the output will shut down with an automatic restart function. The internal input fuse of the device cannot be replaced by the user. A 35-millimeters DIN Rail can be used to mount the device in different locations. The device features return voltage immunity. It helps the decelerating motors and inductors to feed the voltage back to the power supply. The unit has been tested for branch circuits of up to 30 Amps (USA) and 32 Amps (IEC).

Manufacturer information

Allen-Bradley, a brand of Rockwell Automation, specializes in manufacturing industrial automation equipment. The product range includes programmable logic controllers (PLCs), motion control systems, safety devices, motor control equipment, automation software, and HMI panels. Allen-Bradley products are known for their reliability and integration with other systems.