1606-XLE120EN | Allen-Bradley AC/DC Power Supply 24-28V DC 120W 120V AC Input

Description 

The Allen-Bradley 1606-XLE120E is part of the Essential Switched Mode Power Supply product category. It requires an input power of 100 to 120VAC Voltage with Output Voltage of 24 to 24VDC along a 120W Output Power and Current of 5 Amperes at 24VDC and 4.3 Amperes at 28VDC.

Technical Specifications 

Information About 1606-XLE120EN

The Allen-Bradley 1606-XLE120EN is an Allen-Bradley compact power supply that belongs to the XLE series of Essential Power Supply product line. This power supply requires minimum mounting space and generates minimal amount of heat.

This power supply is a DIN rail mounted device that is used in general power supply requirements of 24VDC devices. This may be used to power Programmable Logic Controller (PLC) power supply modules, solenoid device, pilot lamps, annunciators, lamps, siren, relays and other applications.

The 1606-XLE120EN is installed in an enclosure that offers protection from entry of solid objects and liquid splashes. It operates in an ambient temperature of -25...+70 °C, >60 °C with derating. When terminating connections to this device, refer to the front panel as the labels are clearly displayed on the upper and bottom part of the device. The DV input is on top of the device while the AC input terminal is located at the bottom. Stripped wires with length of 7mm / 0.275inch and use only solid wires with size range of 0.5-6mm2 or stranded wires which measures 0.5-4mm2.

This power supply is compact yet scalable. It may be installed with accessory components to enable redundancy, buffer and UPS capabilities. XLE series is positioned as the entry level product of the 1606 product category. Other products in this series include XLP series and XLS Power supplies.

The 1606-XLE120EN has approvals from CE, cULus and cURus and with compliance from ABS/GL/RINA (Marine),ATEX,CE,Class 1 Div. 2 (T3A),C-Tick,cULus,NEC Class 2 and SEMI F47 standards.

The 1606-XLE120EN power supply is a single-phase input device manufactured by Allen-Bradley. It is a switched-mode power supply device manufactured in an ultra-small size. It is a cost-optimized power supply with enhanced reliability and performance. It belongs to the Allen-Bradley XLE series and has the essential features for long service life and high reliability. It is a 90 to 132 Volts AC input device and it has a power reserve of 20%. The total power rating of the device is 120 Watts with wire connection type of screw clamp. The 1606-XLE120EN power supply works with 5 Amps of output current but it has adjustable output voltage. Heat generation is minimized in this power supply. The SMPS device has a rated efficiency of 90% at 120 Volts AC. The operating line frequency of the device is in the range of 50 to 60 Hertz. The device does not support the DC input. The 1606-XLE120EN power supply has a hold-up time of 80 milliseconds. It has dimensions of 32 x 124 x 117 millimeters. The face of the device has output terminals and different status indicators. It comes with both input and output terminals. The input terminals have neutral input, line input, and the protective earth input. The output terminal includes positive output and negative output. An output voltage potentiometer is located on the front face alongside different LED indicators and the company label. A DC-on lamp is present which turns on when the voltage on the output terminal is above 21 Volts. The 1606-XLE120EN is CE marked and it also meets the EMC requirements and the low-voltage directives. The device can be operated at an altitude of up to 6000 meters above sea level without being derated.

Manufacturer information

Allen-Bradley, a brand of Rockwell Automation, specializes in manufacturing industrial automation equipment. The product range includes programmable logic controllers (PLCs), motion control systems, safety devices, motor control equipment, automation software, and HMI panels. Allen-Bradley products are known for their reliability and integration with other systems.