1732E-12X4M12QCDR | Allen-Bradley ArmorBlock 12 Input 4 Output QC

Description 

The 1732E-12X4M12QCDR Digital I/O Dual-Port Ethernet Module by Allen-Bradley has 12 inputs and 4 outputs. It has a Sinking 24 Volts input type, along with a Sourceing 24 Volts output type. This Ethernet Module has a maximum off-state input voltage of 5 Volts.

Technical Specifications 

Information About 1732E-12X4M12QCDR

The specifications on the Allen-Bradley 1732E-12X4M12QCDR Digital I/O Dual-Port Ethernet Module include 12 inputs and 4 outputs along with an enclosure type that meets the IP 65, 66, 67, 69K, and Type 4X standards for indoor use only. The input specifications for the Allen-Bradley Ethernet Module include a maximum off-state input voltage of 5 Volts with a maximum on-state input voltage of 30 Volts. The nominal on-state input voltage is 24 Volts, and the module's minimum on-state input voltage is 12 Volts. Its maximum off-state input current rating is 1.5 milliAmps at 5 Volts, and the module's maximum on-state input current is rated at 5 milliAmps at 30 Volts. The input delay time on the 1732E-12X4M12QCDR Ethernet Module can be set to intervals of 0, 1, 2, 4, 8, and 16 milliseconds. The maximum on-state output voltage drop rating on the Ethernet module is rated at 0.5 Volts, and its minimum off-peak blocking voltage is 30 Volts.

The general specifications on the 1732E-12X4M12QCDR Allen-Bradley Ethernet Module include minimum and maximum auxiliary power voltage ratings of 12 and 30 Volts, respectively. The maximum Ethernet system power current is 1 Amp, with its maximum rating per output module being 2 Amps. The maximum sensor source current per input reads at 50 milliAmps, with its maximum per connector being 100 milliAmps. The isolation voltage on the 1732E-12X4M12QCDR Ethernet Module is 50 Volts (continuous) with a basic insulation type. The operating temperature should range between -4 and 140 degrees Fahrenheit and the storage temperature should fall between -40 and 185 degrees Fahrenheit. The relative humidity should not go below or above 5 or 95% (non-condensing). The Ethernet Module has an approximate weight of 0.43 kilograms (0.95 pounds). The module dimensions are 200 x 60.4 x 45 millimeters (7.87 x 2.38 x 1.77 inches).

Manufacturer information

Allen-Bradley, a brand of Rockwell Automation, specializes in manufacturing industrial automation equipment. The product range includes programmable logic controllers (PLCs), motion control systems, safety devices, motor control equipment, automation software, and HMI panels. Allen-Bradley products are known for their reliability and integration with other systems.