1732E-8CFGM8R | Allen-Bradley ArmorBlock I/O Dual-Port EtherNet/IP Module

Description 

The Allen-Bradley 1732E-8CFGM8R is an Ethernet I/P I/O ArmorBlock I/O Safety Module. It features a Digital DC Self-configurable blocks with Eight (8) self-configuring Sinking Input and Sourcing Output. It has a continuous output current of 0.5 A per point or 4.0 A per block. It also has dual Ethernet ports for Ring, Star, Linear and Tree topology.

Technical Specifications 

Information About 1732E-8CFGM8R

The 1732E-8CFGM8R is an ArmorBlock Guard I/O Ethernet Safety module that is manufactured by Allen-Bradley. This module belongs to the 1732E product bulletin of ArmorBlock I/O with Ethernet communication port.

The Ethernet communication port of this module is composed of Two (2) Ethernet ports with built-in switch. This port supports implementation of Ring, Star, Tree and Linear topology and supports speed of 10/100 Mbps, using Full and half Duplex with a limit of 100 meters per segment. Each segment may be extended with the use of another Ethernet switch or appropriate repeater or by converting Ethernet to Fiber optic connectivity. It offers configuration, control and data collection by implementing the industry standard Common Industrial Protocol (CIP) over internet protocols such as TCP/IP and UDP. TCP/IP is used mainly for general messaging while UDP/IP is primarily used for I/O messaging to implement control.

The 1732E-8CFGM8R does not include an internal fusing. The I/O are self-configuring types with each point may be configured as sink or source. No particular grouping is applied. It also supports Daisy chaining of auxiliary power which helps in minimizing wire terminations.

This module is especially compatible with Allen-Bradley products and shall have no conflict being connected to the same network where a PowerFlex, PanelView, Point I/O or any ethernet device.

The 1732E-8CFGM8R 8-Point Configurable Digital I/O Dual-Port EtherNet/IP Module by Allen-Bradley has 8 Sink-Type inputs and 8 Sourcing-Type outputs. With respect to general specifications, the 1732E-8CFGM8R module has a maximum power voltage of 30 Volts and a minimum power voltage of 12 Volts. The maximum module current is 300 mA at 24 Volts, while its auxiliary current (module only) rates at 25 mA at 24 Volts. The maximum auxiliary current per module is 4 Amps at 24 Volts. This module communicates with the end-users via status indicators, with the module status being indicated with red/green LEDs, the network status indicated with red/green LEDs, the link status with green/yellow LEDs, power status with green LED, and the I/O status with a yellow LED. The 1732E-8CFGM8R has dimensions of 179 x 37 x 27 millimeters, or 7.05 x 1.46 x 1.06 inches. It has a pilot duty rating of DC-14, and an approximate weight of 0.34 kilograms, or 0.75 pounds. The input specifications of the 1732E-8CFGM8R Module include a maximum off-state voltage of 5 Volts, Maximum ON-state voltage of 30 Volts, and 10 Volts minimum voltage sensor source. Input filters can be applied in increments of 0, 2, 4, 8, and 16 milliseconds. With respect to its output specifications, the module has a maximum surge current per output of 1.2 Amps for 10 milliseconds, repeatable every 2 seconds. The environmental specifications include an operating temperature range of -4 and 140 degrees Fahrenheit, as well as a non-operating temperature range of -40 and 185 degrees Fahrenheit. The maximum ambient operating temperature is 140 degrees Fahrenheit, and its relative humidity should be kept between 5 and 95% (non-condensing).

Manufacturer information

Allen-Bradley, a brand of Rockwell Automation, specializes in manufacturing industrial automation equipment. The product range includes programmable logic controllers (PLCs), motion control systems, safety devices, motor control equipment, automation software, and HMI panels. Allen-Bradley products are known for their reliability and integration with other systems.