1734-TB3S | Allen-Bradley | POINT I/O 12-Position IP20 Spring Terminal Base

Description 

The 1734-TB3S is a wiring base assembly that is part of Allen-Bradley’s POINT I/O system. This module has a maximum field power bus supply voltage of 300 V with maximum supply current of 10 A. This assembly has Twelve (12) spring clamp terminals.

Technical Specifications 

Information About 1734-TB3S

The 1734-TB3S is a Terminal Base assembly module from Allen-Bradley’s 1734 POINT I/O system. This assembly is composed of a mounting base that provides a DIN attachment mechanism; Interlocking side pieces for establishing POINT I/O Bus connection and a module slot for hosting the elected POINT I/O module. The other component of this assembly is the Removable Terminal Block (RTB) which allows signal and power supply wires to be connected to the module. The 1734-TB3S is a spring clamp terminal. It has Twelve (12) terminals where terminals 4, 5, 8, and 9 are internally shorted and terminals 6, 7, 10, and 11 are internally shorted as well however, not connected to other shorted groups. This module also has a DIN Rail locking screw and mechanical keying for locking the module into place. The 734-TB3S is compatible for use with a wide variety of POINT I/O modules such as 1734-IB4, 1734-IB2, 1734-IB8, 1734-IV4, 1734-IV8, 1734-IV2, 1734-OV8E, 1734-OB2, 1734-OB4, 1734-OB8, 1734-OB2E, 1734-OB8E, 1734-OV4E, 1734-OB4E, 1734-OB2EP, 1734-OV2E (Key 1); 1734-IE2V, 1734-IE2C; 1734-OE2C, 1734-OE2V, 1734-CTM, 1734-VTM (Key 5); 1734-OW4, 1734-OW2, 1734-OX2; 1734-IM2, 1734-IA2, 1734-IM4, 1734-OA2, 1734-OA4, and 1734-IA4. This assembly has a maximum field power bus supply voltage of 300 V with a maximum supply current of 10 A while the signal terminal voltage is rated 30 V and signal terminal current of 2 Amperes. It features built-in isolation rated 250V, Basic Insulation Type isolation between field-side to the system, Type tested at 1000V AC for 60 s duration. It has an open-type enclosure and requires a screw torque of 0.8 N-m (7 lb-in).

The 1734-TB3S is a POINT I/O Terminal Base Assembly by Allen Bradley. The assembly includes an RTB, a removable terminal block, for wiring. This 12-terminal base assembly spring-clamp is used to wire industrial automation sensors, transmitters, and switches to POINT I/O system, and can be mounted horizontally or vertically. It has communication and power lines attached to its backplane, and a mechanical key number system to ensure correct module installation. All of this assembly’s parts can be installed without using any tools. Once the RTB has been wired, there is no need to rewire terminations. These RTBs can be separated independently of the base and I/O module to make for easy and rapid installation and commissioning of the system.

The 1734-TB3S includes components such as an RTB spring-clamp and handle, a Mechanical Keying system, a mounting base, a DIN-rail Locking Screw, and interlocking side pieces. Spare RTBs correspond to the number code 1734-RTB3S.

Weighing approximately 87.0 grams (3.07 ounces), with a wire size of 0.34 to 2.1 millimeters (or 22 to 14 AWG), its size is around 65 x 12 x 160 millimeters (2.56 x 0.472 x 6.25 inches). Its supply voltage is maximum 300 Volts with a terminal current reaching 10A at maximum, and a power bus supply voltage of 28.8 Volts DC and 120 to 240 Volts AC.

The 1734-TB3S terminal base assembly can be installed to the POINT I/O without any tools. Start by positioning the base above previously installed modules and sliding the base down and connecting it to the units on the left. Press down firmly to place the terminal base on the DIN-rail until the base falls into place. If the assembly has been positioned correctly, the locking screw will be in a horizontal position. Then set the mechanical key to the number of the specific I/O module that is to be mounted on the assembly. The 1734-TB3 assembly includes a removable terminal block, which can be removed by pulling up on the handle on its top. In this way, the terminal base or I/O module can be changed without disconnecting of any wires.

The POINT I/O system incorporates DIN-rail grounding. For secure grounding use Zinc plated yellow-chromate steel DIN-rail. Connection to the pins is dependable on I/O module to be mounted. Never use more than 2 conductors for connecting to pins.

Allen-Bradley 1734-TB3S terminal base assembly may be paired with following modules (appropriate key number): 1734-IB4, 1734-IB2, 1734-IB8, 1734-IV4, 1734-IV8, 1734-IV2, 1734-OV8E, 1734-OB2, 1734-OB4, 1734-OB8, 1734-OB2E, 1734-OB8E, 1734-OV4E, 1734-OB4E, 1734-OB2EP, 1734-OV2E (Key 1); 1734-IE2V, 1734-IE2C (Key 3); 1734-OE2C, 1734-OE2V (Key 4); 1734-CTM, 1734-VTM (Key 5); 1734-OW4, 1734-OW2, 1734-OX2 (Key 7); 1734-IM2, 1734-IA2, 1734-IM4, 1734-OA2, 1734-OA4, 1734-IA4 (Key 8). An RTB is distributed with the 1734-TBCJC assembly; to remove it, pull up the RTB handle part on top of it. This allows the mounting base to be removed and replaced without wiring removal.

The POINT I/O system has a built-in DIN-rail grounding. A zinc-plated chromate steel DIN-rail is recommended to establish correct grounding. Single terminal pin connections: 0 (N/A), 1 (N/A), 2 (N/A), 3 (Shield), 4 (1+), 5 (1-), 6 (0+), 7 (0-). More than 2 conductors should not be used on any single terminal pin.

Manufacturer information

Allen‑Bradley components, integrated control and information solutions are built for demanding industrial applications. We integrate control and information across the enterprise to make you as productive as possible.

IQElectro 2 Year Warranty

IQElectro offers a 2-Year Warranty on all our products. This complimentary two-year warranty ensures that every purchase from IQElectro is a secure investment in the future of your company.
Warranty Terms and Conditions

IQElectro is not an authorized distributor.

IQElectro LLC (IQElectro) is NOT an Authorized Distributor or in any way affiliated with Rockwell Automation, Siemens, or any other Manufacturers. IQElectro is NOT an Authorized Dealer of this product. The product may be of older version, date codes, or design than that available from authorized dealers. As IQElectro is not an authorized dealer of this product, the Original Manufacturer's Warranty and Support DO NOT apply. IQElectro sells SURPLUS only and DOES NOT SELL SOFTWARE or FIRMWARE licenses. Some hardware products may contain software and firmware and may not be legally operated without first obtaining an appropriate license from the manufacturer. IQElectro makes no representation as to whether a product will or will not have software or firmware and, if it does, whether the software or firmware is the revision level that you need for your application. IQElectro also makes no representations as to your ability or right to download or otherwise obtain software or firmware for the product from the Original Manufacturer, its distributors, or any other source. IQElectro also makes no representations as to your right to install any such software or firmware on the product. IQElectro will not obtain or supply software or firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing software or firmware. Customer acknowledges and agrees that IQElectro DOES NOT provide any software, firmware, operating system, or right-to-use licenses with the products it sells. Customers understand and agree that proper software (firmware) licensing, maintenance, and upgrades are subject to the applicable manufacturer's Licensing Agreement or similar document. Disclaimer Policy.