1747-SN | Allen-Bradley SLC 500 Remote I/O Scanner Module

Description 

The Allen-Bradley 1747-SN is a SLC500 Remote I/O (RIO) scanner module. This module is primarily designed to implement high-speed data transfer between SLC500 processors, Human Machine Interface (HMI) and other automation devices. This module has One (1) Remote I/O communication port used to communicate with RIO adapters in the RIO network. Adequate communication for use with this module is Belden 9463 cable and capable of up to to 3050 m or 10000 ft.

Technical Specifications 

Information About 1747-SN

The 1747-SN is an Allen-Bradley communication module that is used to implement Remote I/O (RIO) communication between RIO protocol enabled devices such as PanelView graphic operator terminals, message display, SLC500 controllers, other Programmable Logic Controller (PLC) and 3rd party devices such as gateways and protocol converters. This communication module is specifically a Scanner module, communicating with compatible RIO adapter modules to request I/O status update, messages and diagnostics over the RIO network.

The 1747-SN comes with One (1) RIO communication port. This port is a Three (3) pin terminal that requires a specific communication cable such as the Belden 9463 cable. RIO protocol may be implemented physically at a maximum wire length of 3050 meters or 1050 ft where supported connections are up to Sixteen (16) devices when operating in normal mode and Thirty-Two (32) devices in complementary mode. This scanner module is able to transfer data at a transmission rate of 57.6 Kbaud with cable length of 3048 meters and 230.4 Kbaud rate with cable length of 762 meters. Devices are connected in daisy-chain topology with both ends terminated using an 82 Ohm resistor.

The 1747-SN supports downloading, uploading and commissioning of the SLC500 controller as well as data transfer to connected graphic terminal in the network. It also supports remote I/O passthru.

The 1747-SN uses the node’s extended capability to transfer information in the communication channel at a rate of 57.6 Kbaud through a cable length of 3048 meters (10,000 feet) and at a rate of 230.4 Kbaud through a maximum distance of 762 meters (2500 feet) cable using an 82-Ohm terminating resistor. Information is also transmitted with the node’s non-extended capability at rates of 57.6 Kbaud and 230.4 Kbaud through a cable distance of 3048 meters (10,000 feet) and 762 meters (2500 feet) using an 82-Ohm 1/2 Watt terminating resistor. It has four selectable baud rates and it uses 2 DIP switches (Switch 1 and 2) for the selection of baud rates. The 1747-SN’s operating temperature range is between 0 and 60 degrees Celsius at 5 to 95% humidity without condensation and it has a non-operational temperature between -40 degrees Celsius and 85 degrees Celsius.

Manufacturer information

Allen‑Bradley components, integrated control and information solutions are built for demanding industrial applications. We integrate control and information across the enterprise to make you as productive as possible.

IQElectro 2 Year Warranty

IQElectro offers a 2-Year Warranty on all our products. This complimentary two-year warranty ensures that every purchase from IQElectro is a secure investment in the future of your company.
Warranty Terms and Conditions

IQElectro is not an authorized distributor.

IQElectro LLC (IQElectro) is NOT an Authorized Distributor or in any way affiliated with Rockwell Automation, Siemens, or any other Manufacturers. IQElectro is NOT an Authorized Dealer of this product. The product may be of older version, date codes, or design than that available from authorized dealers. As IQElectro is not an authorized dealer of this product, the Original Manufacturer's Warranty and Support DO NOT apply. IQElectro sells SURPLUS only and DOES NOT SELL SOFTWARE or FIRMWARE licenses. Some hardware products may contain software and firmware and may not be legally operated without first obtaining an appropriate license from the manufacturer. IQElectro makes no representation as to whether a product will or will not have software or firmware and, if it does, whether the software or firmware is the revision level that you need for your application. IQElectro also makes no representations as to your ability or right to download or otherwise obtain software or firmware for the product from the Original Manufacturer, its distributors, or any other source. IQElectro also makes no representations as to your right to install any such software or firmware on the product. IQElectro will not obtain or supply software or firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing software or firmware. Customer acknowledges and agrees that IQElectro DOES NOT provide any software, firmware, operating system, or right-to-use licenses with the products it sells. Customers understand and agree that proper software (firmware) licensing, maintenance, and upgrades are subject to the applicable manufacturer's Licensing Agreement or similar document. Disclaimer Policy.