1756-M03SE | Allen-Bradley ControlLogix 3 Axis SERCOS Servo Module

Description 

The 1756-M03SE is a ControlLogix SERCOS interface module. This module is capable of interfacing up to Three (3) drives with data rate of 4 Mbps and 8 Mbps. It is capable of implementing drive control modes such as Position, velocity, and torque control. This module is installed to any ControlLogix Chassis.

Technical Specifications 

Information About 1756-M03SE

The Allen-Bradley 1756-M03SE is a SERCOS interface module that connects the controller to SERCOS interface drives. It has 3 axes available that are compatible with the Kinetix 2000 Servo drive. It uses a single, digital, fiber-optic link that eliminates as many as 18 digital wires per axis. It also lets you control digital drives by using high-speed, real-time serial communication. The drive control modes available with the 1756-M03SE module are position, velocity, and torque.

Before installing this module, it is important to install and ground the ControlLogix chassis it will be connected to first, as well as a ControlLogix power supply, and have the required fiber optic cables wires required for its installation. This is because the wires will be used to connect the drives and the module. The ControlLogix chassis compatible with this module are the 1756-A4, 1756-A7, 1756-A10, 1756-A13, and the 1756-A17. The module can be installed in any available slot of the chassis and has an open-type enclosure.

The module has a SERCOS interface data rate of 4 Mbps or 8 Mbps and can handle a maximum of 3 SERCOS interface drives. At 4 Mbps, the SERCOS cycle time is 0.5 ms for up to 2 drives (but only with Kinetix 6000 drives), 1 ms for up to 4 drives, and 2 ms for up to 8 drives. While at 8 Mbps, the SERCOS cycle time is 0.5 ms for up to 4 drives (but also only with Kinetix 6000 drives), 1 ms for up to 8 drives, and 2 ms for up to 16 drives.

It has a current draw of 2.5 mA at 24VDC and 760 mA at 5.1V DC and a power dissipation of 5 W. The module also has an operating temperature range of 0 to 60 Degrees Celsius and a storage range of -40 to 85 Degrees Celsius. It also has a non condensing relative humidity of 5% to 95%.

It also has an optically-isolated, current sinking input type. Its nominal voltage is 24V DC. The on-state minimum voltage is 17V DC, the maximum on-state is 26.4V DC, and the maximum off-state voltage is 8.5V DC.

The Allen-Bradley 1756-M03SE is a ControlLogix Serial Real-Time Communications System (SERCOS) module that is used to connect to Allen-Bradley Kinetix drives such as 2093 Kinetix 2000 multi-axis servo drive, 2094 Kinetix 6000 multi-axis servo drive, 2099 Kinetix 7000 high-power servo drive and 2098 Ultra3000 SERCOS servo drive.

This module is directly installed to any ControlLogix chassis such as 1756-A4, 1756-A7, 1756-A10, 1756-A13, 1756-A17. It occupies a single slot within the chassis and is compatible for insertion to any available slots. For simplex ControlLogix application, compatible power supply includes 1756-PA72/C, 1756-PA75/B, 1756-PB72/C, 1756-PB75/B, 1756-PC75/B, 1756-PH75/B while for Redundant ControlLogix configuration, compatible power supplies are 1756-PA75R, 1756-PB75R, 1756-PSCA2.

This module uses fiber cables to interface and eliminate the need for copper wires. With the use of Fiber cables, noise rejection is increased allowing optimum and fault-free operation of the Kinetix drive. Fiber cables compatible for this module are 2090-SCEPxx-0 non-jacketed, chlorinated polyethylene 2090-SCVPxx-0 standard jacket, polyvinyl chloride 2090-SCNPxx-0 nylon jacket Plastic Fiber cables while for 2090-SCVGxx-0 standard jacket, polyvinyl chloride for Glass Fiber Optic cables.

Compared to other modules that cater 3rd party and generic servo systems, this SERCOS interface module is specifically designed for Kinetix Servo drive of Allen-Bradley.

This Open Loop and Closed Loop capable module is ideal for applications that require Position, Velocity and Torque control. This module meets international communication standards for motion control such as International-Electrotechnical Commission (IEC) IEC61491.

Manufacturer information

Allen‑Bradley components, integrated control and information solutions are built for demanding industrial applications. We integrate control and information across the enterprise to make you as productive as possible.

IQElectro 2 Year Warranty

IQElectro offers a 2-Year Warranty on all our products. This complimentary two-year warranty ensures that every purchase from IQElectro is a secure investment in the future of your company.
Warranty Terms and Conditions

IQElectro is not an authorized distributor.

IQElectro LLC (IQElectro) is NOT an Authorized Distributor or in any way affiliated with Rockwell Automation, Siemens, or any other Manufacturers. IQElectro is NOT an Authorized Dealer of this product. The product may be of older version, date codes, or design than that available from authorized dealers. As IQElectro is not an authorized dealer of this product, the Original Manufacturer's Warranty and Support DO NOT apply. IQElectro sells SURPLUS only and DOES NOT SELL SOFTWARE or FIRMWARE licenses. Some hardware products may contain software and firmware and may not be legally operated without first obtaining an appropriate license from the manufacturer. IQElectro makes no representation as to whether a product will or will not have software or firmware and, if it does, whether the software or firmware is the revision level that you need for your application. IQElectro also makes no representations as to your ability or right to download or otherwise obtain software or firmware for the product from the Original Manufacturer, its distributors, or any other source. IQElectro also makes no representations as to your right to install any such software or firmware on the product. IQElectro will not obtain or supply software or firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing software or firmware. Customer acknowledges and agrees that IQElectro DOES NOT provide any software, firmware, operating system, or right-to-use licenses with the products it sells. Customers understand and agree that proper software (firmware) licensing, maintenance, and upgrades are subject to the applicable manufacturer's Licensing Agreement or similar document. Disclaimer Policy.