1771-OD | Allen-Bradley PLC-5 Digital Output Module, 120V AC, 6-Point, Isolated

Description 

The Allen-Bradley 1771-OD is an isolated output module from the 1771 product bulletin. It has Six (6) 120VAC isolated output channels that provides up to 2A continuous output current per point without exceeding 6A per module. It is mounted to any 1771 I/O chassis and uses the 1771-WD Field Wiring Arm.

Technical Specifications 

Information About 1771-OD

The 1771-OD is a discrete output module from Allen-Bradley. It is part of the 1771 product family which features Six (6) isolated output channels that deliver output voltage of 92 - 138VAC with frequency of 47-63 Hz. This module has a continuous output rating of 2 Amperes per channel without exceeding 6 Amperes for the entire module. It is installed to any available 1771 I/O chassis and uses the 1771-WD field wiring arm.

The 1771-OD is installed with 5A, 250VAC Bussman MTH5, IEC27 Type F fuse. This fuse can be replace with the same or any fuse with the equivalent type and rating. The isolation fuses can be accessed when the front component side cover is removed. It is also recommended to remove power from the backplane when replacing fuse. Installation of fuse with power applied may trigger static discharge and electrical arc which may at least degrade the electronic components or worst, damage the entire module.

The 1771-OD also come with Twelve (12) status indicator lights. Half of the LED indicators are designated to signify the energization states of each output channels while the other half are dedicated to monitor the fuse-blown status.

The 1771-OD has a maximum power dissipation of 13.2 Watts and minimum dissipation of 1.2 Watts. Similarly, maximum Thermal Dissipation is 45.2 BTU/hr while minimum dissipation is 4.1 BTU/hr. When making wiring connections to this module, appropriate conductor size range is 14-22 American Wire Gauge (AWG), strander or solid copper wire with insulation rating of 75 Deg. Celsius or higher and maximum insulation thickness of 3/64 inches or 1.2 mm insulation. It uses the 1771-WD Field Wiring Arm with tightening screw Torque of 7-9 lbs-in.

It can reach an altitude of 2000 meters at its maximum without derating. Do not connect or disconnect the cable to the terminal block while power is on, or insert or discharge the module while power is on; ensure that the power has been switched off and the area secured before continuing. Failure to do so may result in a potentially hazardous electric arc which can cause an explosion in the installation area.

The 1771-OD is supplied as open-type enclosure. It has a range of power dissipation between 1.2 and 13.2 Watts, a thermal dissipation range between 4.2 and 45.2 BTU per hour, and comes with a total of six outputs. This unit has a maximum backplane current of around 225 mA; its voltage rating at 47 to 63 Hertz can range between 92 and 138 Volts with an output current rating of 2 A per each output. The maximum On-state voltage drop of this module is 2 Volts at rated current and the maximum Off state leakage current of this module is 5 mA per output.

Manufacturer information

Allen‑Bradley components, integrated control and information solutions are built for demanding industrial applications. We integrate control and information across the enterprise to make you as productive as possible.

IQElectro 2 Year Warranty

IQElectro offers a 2-Year Warranty on all our products. This complimentary two-year warranty ensures that every purchase from IQElectro is a secure investment in the future of your company.
Warranty Terms and Conditions

IQElectro is not an authorized distributor.

IQElectro LLC (IQElectro) is NOT an Authorized Distributor or in any way affiliated with Rockwell Automation, Siemens, or any other Manufacturers. IQElectro is NOT an Authorized Dealer of this product. The product may be of older version, date codes, or design than that available from authorized dealers. As IQElectro is not an authorized dealer of this product, the Original Manufacturer's Warranty and Support DO NOT apply. IQElectro sells SURPLUS only and DOES NOT SELL SOFTWARE or FIRMWARE licenses. Some hardware products may contain software and firmware and may not be legally operated without first obtaining an appropriate license from the manufacturer. IQElectro makes no representation as to whether a product will or will not have software or firmware and, if it does, whether the software or firmware is the revision level that you need for your application. IQElectro also makes no representations as to your ability or right to download or otherwise obtain software or firmware for the product from the Original Manufacturer, its distributors, or any other source. IQElectro also makes no representations as to your right to install any such software or firmware on the product. IQElectro will not obtain or supply software or firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing software or firmware. Customer acknowledges and agrees that IQElectro DOES NOT provide any software, firmware, operating system, or right-to-use licenses with the products it sells. Customers understand and agree that proper software (firmware) licensing, maintenance, and upgrades are subject to the applicable manufacturer's Licensing Agreement or similar document. Disclaimer Policy.