1783-BMS10CGN | Allen-Bradley Stratix 5700 Ethernet Switch, 10-Port w/2-SFP

Description 

The Allen-Bradley 1783-BMS10CGN is a Stratix 5700 Ethernet managed switch. This ethernet switch has a total of Ten (10) communication ports composed of Eight (8) Fast Ethernet ports supporting 100 Mbps and Two (2) Gigabit Ethernet ports supporting 1000 Mbps transmission speed. This switch support CIP Sync, Network Address Translation (NAT) and Device Level Ring (DLR). This switch is externally powered by 12-48VDC supply voltage.

Technical Specifications 

Information About 1783-BMS10CGN

The Allen-Bradley 1783-BMS10CGN is a Stratix Ethernet I/P managed switch. This ethernet switch features a total of Ten (10) Ethernet ports with Eight (8) Fast Ethernet (FE) Copper ports and Two (2) Gigabit Ethernet (GE) ports. This Ethernet switch may be used for implementing industrial architecture with increased level of security and resiliency.

It is powered by an external 24VDC supply voltage with a power consumption of 15 Watts @ 24V DC/ 40 °C (104 °F) with maximum consumption of 20 Watts. It has a power dissipation of 20 Watts. The 1783-BMS10CGN has an integrated alarm relay with contact rating of 1 A @ 30V DC or 0.5 A @ 48V DC.

The combo ports which support Gigabit Ethernet (GE) may be installed with a Small Form-factor Pluggable (SFP) transceiver, used for fiber-optic layer. It may also be installed with a 1784-SD1, used for saving the ethernet switch’ configuration and convenient transfer of configuration to other similar managed ethernet switches.

For Ethernet connection, recommended wire assembly is RJ45 connector according to IEC 60603-7 and Two (2) or Four (4) pair Category 5e minimum cable complying to TIA 568-B.1 or Category 5 cable according to ISO/IEC 24702. For terminating signal wires to the alarm relay, recommended wire size is 0.5-0.8 mm. sq. or 20-18 AWG solid or stranded, UL/CSA-rated style 1007 or 1569 twisted-pair copper appliance wiring material (AWM) wire, 6.3 mm (0.25 in.) ±0.5 mm (0.02 in.) strip length. For DC power connection, appropriate wire size is 0.5…0.8 mm sq. or 20-18 AWG solid or stranded copper wire with insulation rating of 75 °C (167 °F) or greater, and maximum insulation thickness of 1.2 mm (3/64 in.) with a strip length of 6.3 mm (0.25 in.) ±0.5 mm (0.02 in.).

There are a total of 10 ports on the 1783-BMS10CGN switch. Eight of these ports are copper (RJ-45) ports and they support Fast Ethernet. Two of the ports are combo ports and they support both copper and fiber connectivity. The network speed supported by the combo ports is Gigabit Ethernet. The 1783-BMS10CGN switch comes in an open enclosure which is rated with the T4 North American temperature code. The weight and dimensions of the 1783-BMS10CGN switch are 3.05 pounds and 5.1 x 3.6 x 5.345 inches, respectively. The 1783-BMS10CGN switch works with DC input voltages between 12 and 48 Volts DC. The current consumption of the switch ranges from 0.5 to 2 Amps. The typical power consumption of the 1783-BMS10CGN switch is 15 Watts which can go up to a maximum of 20 Watts. The maximum ambient temperature which the switch can tolerate is 60 degrees Celsius. At higher ambient temperatures, the switch performance will degrade and the switch can also be damaged.

Manufacturer information

Allen-Bradley, a brand of Rockwell Automation, specializes in manufacturing industrial automation equipment. The product range includes programmable logic controllers (PLCs), motion control systems, safety devices, motor control equipment, automation software, and HMI panels. Allen-Bradley products are known for their reliability and integration with other systems.