1SU24001 | Reliance Electric 1HP 200-230VAC Drive

Description 

The SP500 1SU24001 drive is a 3 phase, 1 HP drive. When operating on a 4kHz carrier, the 1SU24001 drive should have a power rating of 19.1 input amps, 4.4 input KVA, and 7.5 output amps. When operating on a 6kHz carrier, the 1SU24001 drive should have 17.2 input amps, 4.0 input KVA, and 7.0 output amps. When operating on a 8kHz carrier, the 1SU24001 drive should have 15.3 input amps, 3.5 input KVA, and 6.5 output amps.

Technical Specifications 

Information About 1SU24001

1SU24001 is either a 1-phase or 3-phase SP500 drive and is manufactured by Reliance Electric. Regardless, the drive is enclosed in a size A 4X/12 enclosure (NEMA). The enclosure is water-tight and dust-tight, which is ideal for indoor environments. A base and keypad gaskets are supplied with the enclosure, which is not vented. The power loss is 70 watts and the AC input is 200-230 volts. The 3-phase version of this drive is either a 4, 6, or 8 kHz carrier.

Input power is directed through terminals R, S, and T, with a recommended wire size of 14 AWG. Output power is directed through terminals U, V, and W, with a recommended wire size of 14 AWG. DB power is directed through the (-) and (+) terminals, with a recommended wire size of 14 AWG. DB control is directed through terminals 12 and 13 on the terminal strip, with a recommended wire size of 14-22 AWG. Function loss is directed through terminals 10 and 11 on the terminal strip, with a recommended wire size of 14-22 AWG. The GND terminal is wired through the GND stud via 14 AWG wire.

Power wiring first requires verifying that the input power to the controller corresponds to the controller nameplate voltage and frequency. Also, the plant supply must be of sufficient capacity to support the input current requirements of the controller. The user must provide a transformer between the plant power supply and the controller if the correct input line voltage is not available. Using table 3-1 or 3-2, size upstream branch circuit protection (fuses) accordingly. Then size the input and output power wiring to handle the controller’s rated maximum current. Use 60/75° copper wire and use the tightening torque 9 to 12 in-lbs for all wire connections to input and output terminals. Wire the power input leads and route the motor leads through the bottom right opening of the controller base to terminals U, V, and W. Caution: do not route signal wiring with power wiring in the same conduit.

Manufacturer information

Reliance Electric, a pioneering electrical equipment manufacturer, was founded in 1904. Acquired by Rockwell Automation, it specialized in motors, drives, and industrial automation solutions. Known for innovation, Reliance played a key role in advancing industrial technology.

IQElectro 2 Year Warranty

IQElectro offers a 2-Year Warranty on all our products. This complimentary two-year warranty ensures that every purchase from IQElectro is a secure investment in the future of your company.
Warranty Terms and Conditions

IQElectro is not an authorized distributor.

IQElectro LLC (IQElectro) is NOT an Authorized Distributor or in any way affiliated with Rockwell Automation, Siemens, or any other Manufacturers. IQElectro is NOT an Authorized Dealer of this product. The product may be of older version, date codes, or design than that available from authorized dealers. As IQElectro is not an authorized dealer of this product, the Original Manufacturer's Warranty and Support DO NOT apply. IQElectro sells SURPLUS only and DOES NOT SELL SOFTWARE or FIRMWARE licenses. Some hardware products may contain software and firmware and may not be legally operated without first obtaining an appropriate license from the manufacturer. IQElectro makes no representation as to whether a product will or will not have software or firmware and, if it does, whether the software or firmware is the revision level that you need for your application. IQElectro also makes no representations as to your ability or right to download or otherwise obtain software or firmware for the product from the Original Manufacturer, its distributors, or any other source. IQElectro also makes no representations as to your right to install any such software or firmware on the product. IQElectro will not obtain or supply software or firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing software or firmware. Customer acknowledges and agrees that IQElectro DOES NOT provide any software, firmware, operating system, or right-to-use licenses with the products it sells. Customers understand and agree that proper software (firmware) licensing, maintenance, and upgrades are subject to the applicable manufacturer's Licensing Agreement or similar document. Disclaimer Policy.