20-750-2262C-2R | Allen-Bradley PowerFlex 750 24V I/O Module: 2AI, 2AO, 6DI, 2RO

Description 

Allen-Bradley 20-750-2262C-2R is an input / output (I/O) module. It was designed and manufactured by Allen Bradley / Rockwell Automation. This product was designed to be used with PowerFlex 753 and 755 variable frequency drives. This module has two (2) analog inputs, two (2) analog outputs, six (6) digital inputs, and two (2) relay outputs. This Allen Bradley I/O module has a voltage rating of 24 volts direct current (DC).

Technical Specifications 

Information About 20-750-2262C-2R

The 20-750-2262C-2R is a 22-Series input /output (I/O) module that belongs to the PowerFlex 753 series of products and is used for various industrial applications. This device, which was designed and produced by Allen Bradley / Rockwell Automation, is flexible and easy to use. This module has two (2) analog inputs, as well as two (2) analog outputs, and operates via a supply voltage that is rated at 115 volts alternating current (AC). This device has a total of two (2) relay outputs. Part number 20-750-2262C-2R may only be installed in port number 7 when used in an Integrated Motion on Ethernet/IP networks. 

The conducting wire of the Allen Bradley 20-750-2262C-2R I/O module should be made of copper. It is important to ensure that the power wires are not mixed up with the control and signal wires. The wires of this module should be separated with at least 3.0 meters, or 1.0 foot, of space. Though it is recommended, it is not necessary to use unshielded wires when the connecting wires are short. These wires should be stored in an area where there are no sensitive circuits. 

In order to comply with the CE requirements, the digital input wiring, which has a voltage rating of 115 volts, must be shielded. Additionally, the digital input wiring must not exceed a length that measures 30 meters, or the equivalent of 98.4 feet. Product number 20-750-2262C-2R has been tested by the Underwriter Laboratory and has been given the UL508C certificate. Additionally, this device has been listed with the CSA and adheres to CSA C22.2 regulations.

Designed and manufactured by Allen Bradley, product number 20-750-2262C-2R is an I/O (input / output) module from the 22-Series product line. This input / output module was designed to be used with/for PowerFlex 753 and PowerFlex 755 variable frequency drives. This I/O module has a voltage rating of twenty-four (24) volts direct current (DC). This I/O module is used mainly in the control, automation, and motion industries. It provides the technical characteristics of the I/O required by various industrial motor controlling and speed regulating drives. The Allen Bradley20-750-2262C-2R 22-Series input / output (I/O) module is equipped with two (2) analog inputs and two (2) analog outputs. Additionally, this I/O module has six (6) digital inputs, as well as two (2) relay outputs. The six (6) input terminals of this Allen Bradley I/O module are labeled as Di 0, Di 1, Di 2, Di 3, Di 4, and Di 5. These inputs have a voltage rating of 24 volts DC and are opto isolated. These inputs have a voltage of less than 5 volts DC in Low State and greater than 20 volts DC with a current of 11.2 milliamperes in High State. Also, at a voltage of 115 volts AC at 50/60 hertz, these inputs are opto isolates. They have a voltage of less than 30 volts AC in Low State, as well as greater than 100 volts AC in High State. Additionally, this module has a shared common. This common is labeled as Di C. The front of the Allen Bradley 20-750-2262C-2R input / output (I/O) module is labeled as TB1. 

Manufacturer information

Allen-Bradley, a brand of Rockwell Automation, specializes in manufacturing industrial automation equipment. The product range includes programmable logic controllers (PLCs), motion control systems, safety devices, motor control equipment, automation software, and HMI panels. Allen-Bradley products are known for their reliability and integration with other systems.