2080-OB4 | Allen-Bradley Micro800 4-Ch Digital Output, 12/24V DC

Description 

The Allen-Bradley/Rockwell Automation 2080-OB4 module is a Micro 800 series digital output module. It comes with 4 digital output channels. The 2080-OB4 digital output module can be mounted on a terminal base and it does not have a built-in enclosure for protection. Its minimum on-state voltage rating is 10 Volts DC, its nominal on-state voltage rating is 24 Volts DC, and its maximum on-state voltage rating is 30 Volts DC. The 2080-OB4 digital output module can operate at -20 to 65 degrees Celsius and it can be stored at -40 to 85 degrees Celsius.

Technical Specifications 

Information About 2080-OB4

This Digital Plug-In, the 2080-OB4, is a Micro800 series output module with four channels and a 12-pin, female terminal block. The 2080-OB4 does not require an enclosure (enclosure rating Open-Type) and has a mounting torque of 1.48 pounds on an inch (or 0.2 N-m). This output module has four (4) yellow status indicators and requires a terminal base screw torque of 1.95 to 2.21 pounds per inch (or 0.22 to 0.25 N-m).

The 2080-OB4 requires an amount of wiring, which must be completed in copper wire, either solid or stranded. Whichever wire type is being used, it must fall into the range of 16 to 24 AWG (or 1.3 to 0.2 millimeters squared) for it to comply with the module’s requirements. The wire must also be insulated enough to withstand up to 194 degrees Fahrenheit.

The 2080-OB4 module has a power supply between a minimum of 10.8 Volts DC and a maximum of 30 Volts DC. In its On-state, it has a voltage range between 10 Volts minimum and 30 Volts maximum, with 24 being the nominal voltage. Its current in its On-state hangs around 5.0 mA (at 10 Volts DC).

This module’s temperature while operating can fluctuate between -4 and 149 degrees Fahrenheit (-20 to 65 degrees Celsius), and can range between -40 and 185 degrees Fahrenheit (-40 and 85 degrees Fahrenheit) while turned off. The surrounding air should not exceed a temperature of 149 degrees Fahrenheit for a safe operation of the 2080-OB4. This module is certified by CE, C-Tick, KC, and c-UL-us.

The purpose of this module is to provide an output to switch an assortment of DC voltages (between 12 and 24 Volts) top field loads. The 2080-OB4 module also detects signals from field devices (also between 12 and 24 Volts). At 10 to 500 Hertz, this unit has a 2 g vibration.

Manufacturer information

Allen-Bradley, a brand of Rockwell Automation, specializes in manufacturing industrial automation equipment. The product range includes programmable logic controllers (PLCs), motion control systems, safety devices, motor control equipment, automation software, and HMI panels. Allen-Bradley products are known for their reliability and integration with other systems.