22C-D045A103 | Allen-Bradley PowerFlex 400 Fan & Pump Drive 480VAC 3PH 45.5A 30HP

Description 

The 22C-D045A103 is a PowerFlex 400 Adjustable Frequency AC Drive from Allen-Bradley. This drive is specifically designed for fan and pump application. It operates when supplied with voltage of 480VAC, 3-Phase. It delivers output power of 22.0 kW or 30.0 HP. The drive’s output Current is 45.5 Amperes with an IP30, NEMA UL Type 1 enclosure.

Technical Specifications 

Information About 22C-D045A103

The Allen-Bradley 22C-D045A103 is a Variable Frequency Drive (VFD). This drive is used for industrial fan, pump and damper applications. It suits a wide variety of industries such as Water, Wastewater, Heating Ventilation and Air-Conditioning (HVAC), Building Management systems (BMS) and other similar applications both for factory and process automations.

The 22C-D045A103 is part of the PowerFlex adjustable frequency AC drives which are also called Variable Frequency Drives (VFD), Variable Speed Drives (VSD), Frequency inverter or inverter. These terms all refer to a device that is mainly used for AC motor speed modulation. In other applications, an adjustable frequency AC drive is used primarily for lowering operational costs as this equipment provides programmable start and stop modes, minimizing generation and the effects of inrush current.

The 22C-D045A103 implements speed control using the built-in control programmable control methods such as Sinusoidal Pulse Width Modulation (PWM) and Volts / Hertz (V/Hz) control. Additionally, it has the capability of implementing Proportional + Integral + Derivative (PID) control algorithm, allowing the drive to act as a loop controller, implementing fully-automatic control and maintaining the desired process variable within the acceptable specified Setpoint range.

The 22C-D045A103 has a built-in RS485 communication interface, enabling the drive to be connected in a network of PowerFlex drives. Up to 31 drives may be connected, allowing remote operation and configuration. Additionally, this drive supports installation of optional communication adapters that support ProfiBus, LONWORKS, Ethernet I/P, DeviceNet communication protocols.

The 22C-D045A103 operates when supplied with a voltage of 480VAC, 3-Phase. It delivers output power of 22.0 kW or 30.0 HP and output Current of 45.5 Amperes.

Rated for an IP30, NEMA/UL Type 1 enclosure, this drive has a frame size of D. It has a drive rating of 22 kW, an output current of 45.5 Amps anywhere between 45 and 50 degrees Celsius, and a 30 HP output power. Its input ratings include 47 Amps, a 340 to 528 voltage range, and a 39.1 kVA rating. It requires use of 60 A and a 100-C60 Contactor for branch circuit protection. This unit dissipates approximately 738 IP20 Open Watts of power. This PowerFlex 400 should not be stored, installed, or operated in an atmosphere that may contain potentially harmful or corrosive elements including dangerous gases, vapors, or forms of dust. Additionally, it should be mounted at an altitude lower than 3300 feet (or 1000 meters). Its ideal operating temperature peaks at 113 degrees Fahrenheit and drops as low as 14, but should not exceed either (-10 to 45 degrees Celsius). It can also be stored in temperatures between -40 and 185 degrees Fahrenheit, but again should not exceed these extremes (-40 and 85 degrees Celsius). Though this module has an operating shock that peaks at 15 G for an 11-millisecond duration and an operating vibration maximum of 1G, 5 to 2000 Hertz, it still meets and passes the seismic requirements set by the International Building Code in 2003. The 22C-D045A103 contains an integral Auxiliary Motor Control trait, allowing the operation of up to three (3) additional line-started motors with the motor that is directly managed by a PowerFlex 400 drive. A motor interlock input service can identify obsolete motors and move to the next available motor, skipping over the ones that are no longer in service.

Manufacturer information

Allen‑Bradley components, integrated control and information solutions are built for demanding industrial applications. We integrate control and information across the enterprise to make you as productive as possible.

IQElectro 2 Year Warranty

IQElectro offers a 2-Year Warranty on all our products. This complimentary two-year warranty ensures that every purchase from IQElectro is a secure investment in the future of your company.
Warranty Terms and Conditions

IQElectro is not an authorized distributor.

IQElectro LLC (IQElectro) is NOT an Authorized Distributor or in any way affiliated with Rockwell Automation, Siemens, or any other Manufacturers. IQElectro is NOT an Authorized Dealer of this product. The product may be of older version, date codes, or design than that available from authorized dealers. As IQElectro is not an authorized dealer of this product, the Original Manufacturer's Warranty and Support DO NOT apply. IQElectro sells SURPLUS only and DOES NOT SELL SOFTWARE or FIRMWARE licenses. Some hardware products may contain software and firmware and may not be legally operated without first obtaining an appropriate license from the manufacturer. IQElectro makes no representation as to whether a product will or will not have software or firmware and, if it does, whether the software or firmware is the revision level that you need for your application. IQElectro also makes no representations as to your ability or right to download or otherwise obtain software or firmware for the product from the Original Manufacturer, its distributors, or any other source. IQElectro also makes no representations as to your right to install any such software or firmware on the product. IQElectro will not obtain or supply software or firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing software or firmware. Customer acknowledges and agrees that IQElectro DOES NOT provide any software, firmware, operating system, or right-to-use licenses with the products it sells. Customers understand and agree that proper software (firmware) licensing, maintenance, and upgrades are subject to the applicable manufacturer's Licensing Agreement or similar document. Disclaimer Policy.