22D-D1P4N104 | Allen-Bradley PowerFlex 40P AC Drive 480VAC 3-Phase 1.4A 0.5HP IP20

Description 

The Allen-Bradley 22D-D1P4N104 is a PowerFlex 40P Variable Frequency Drive (VFD). This VFD is powered with an input voltage range of 342-528VAC, 3-phase with applicable motor output of 1.4 A and Power of 0.4kW (0.5 HP).

Technical Specifications 

Information About 22D-D1P4N104

The Allen-Bradley 22D-D1P4N104 is a PowerFlex 40P drive with a B-size frame. This drive is a panel-mounted device with an IP20 / NEMA UL Type Open enclosure. It is powered by a 480V AC, 3-Phase voltage at 50-60 Hz, and delivers an output current of 1.4A, and power of 0.5 HP, and 0.4 kW. The 22D-D1P4N104 has no CE-compliant filter.

When servicing the 22D-D1P4N104 PowerFlex 40P drive, wait at least 3 minutes for its capacitors to discharge most of their voltage. The 22D-D1P4N104’s capacitors are high-voltage and they take time to discharge even when the power is switched off. The LED status indicators are not accurate predictors of safe levels of voltage in the capacitors, they only indicate whether the power is on or off. Also be sure to take precautions for Electrostatic Discharge or ESD. The 22D-D1P4N104 drive has components that are sensitive to ESD, which can damage these components or injure personnel.

When mounting the 22D-D1P4N104 drive, mount it in its B-size frame on a vertical and level panel, using screws with a size of M4 (#8-32) with a screw torque of 14-17 pound-inches. Keep the drive’s cooling fan free of dust and metallic particles, and protect the drive itself from direct sunlight, moisture, and corrosive atmospheres. You can also protect the 22D-D1P4N104 drive from Bus overvoltage and under-voltage trips.

The 22D-D1P4N104 can function at a temperature as low as 14 Degree Fahrenheit and at one as high as 122 Degree Fahrenheit if it is mounted with clearance between it and other drives. The 22D-D1P4N104 drive is UL508C, CAN/CSA-22.2, CE, EMC, and AS/NZS, 1997 Group 1, Class A certified.

The 22D-D1P4N104 has an input voltage supply range of 342-528 VAC, 3-phase along an input current of 1.8 Amperes and frequency of 48-63 Hz. The drive’s output specifications include an output current of 1.4 Amperes and power of 0.4 kW (0.5 HP). The drive’s output voltage range is 0-460VAC, 3-Phase along a frequency range of 0-500 Hz.

The mounting orientation supported by the 22D-D1P4N104 is vertical mounting, directly to the subpanel of an enclosure. Recommended enclosure for use with this drive is rated Ingress Protection (IP) IP20 that is equivalent to National Electrical Manufacturers Association (NEMA) UL Type Open rating. Appropriate enclosure accessories may be installed to prevent entry of water, corrosive gases and other contaminants inside the enclosure as well as control internal temperature.

The 22D-D1P4N104 implements speed and Torque control using Volts/Hertz method or Sensorless Vector Control. It also supports Process PID, allowing the drive to implement fully-automatic control. It has an integral RS485 communication interface and supports Common Industrial Protocol (CIP). The 22D-D1P4N104 supports speed control with or without encoder feedback, drive overload protection, ramp regulation and flying start. It is also capable of implementing StepLogic function allowing the drive to act as an independent position controller.

Manufacturer information

Allen-Bradley, a brand of Rockwell Automation, specializes in manufacturing industrial automation equipment. The product range includes programmable logic controllers (PLCs), motion control systems, safety devices, motor control equipment, automation software, and HMI panels. Allen-Bradley products are known for their reliability and integration with other systems.