2706-P22R | Allen-Bradley InView Message Display, 2 x 20, Red LED, NEMA 4X

Description 

The Allen-Bradley 2706-P22R terminal is a message display terminal from the Allen-Bradley/Rockwell Automation InView series. It is designed to be mounted in a custom type of panel or enclosure with a faceplate that will provide it with a NEMA Type 12/13 and 4 protection rating. The 2706-P22R message display terminal should only be used indoors because its enclosure is not designed to protect it from outdoor environmental conditions. Its input voltage range is from 18 to 30 Volts DC. The 2706-P22R message display terminal comes with a 10-position DIP switch that can be used to configure it.

Technical Specifications 

Information About 2706-P22R

The Allen-Bradley 2706-P22R Marquee Message Display is a panel-mounted and large format display. This display for visual information communicates throughout the factory floor. The Allen-Bradley 2706-P22R can send the information wherever it is needed. Some of the tasks of this module are sounding alarms and sending security messages, inventory, or process data. There are eleven different models offered in the line display. It can also modify the character size, message color, font type, and different message effects. This 2706-P22R module integrates displayed messages into industrial and commercial networks using the communication module and the control module. The 2706-P22R can be integrated with other Rockwell Automation modules, third-party controllers, or computer-based systems. For installation, please install the InView device in accordance with the NFPA 70E, Electrical Safety Requirements for Employee Workplace. Proper cable routing minimizes electrical noise. Route power into the module through a separate conduit from the communication cable. Remember not to run communications cables and power lines on the same line.

The Allen-Bradley 2706-P22R has 2 lines. The display type of this module is a red LED matrix with a display area of 30 x 5 cm (12 x 2 inches). The Allen-Bradley InView Marquee Message Display 2706-P22R requires 18 to 30 V DC, 0.5 A at 18 V DC. Before making the power connections, make sure that the power to the 2706-P22R is turned off. Improper wiring may result in personal injury or in damage to the InView display. Make sure that the area around the 2706-P22R’s panel cut out is clear.

Manufacturer information

Allen-Bradley, a brand of Rockwell Automation, specializes in manufacturing industrial automation equipment. The product range includes programmable logic controllers (PLCs), motion control systems, safety devices, motor control equipment, automation software, and HMI panels. Allen-Bradley products are known for their reliability and integration with other systems.