2711-T6C20L1 | Allen-Bradley PanelView 600 Color Touch, ENet/IP & RS232-Pr, DC

Description 

The Allen-Bradley/Rockwell Automation 2711-T6C20L1 terminal is a Panelview 600 series operator terminal. This operator terminal runs on 18 to 32 Volts DC of operating voltage. The 2711-T6C20L1 operator terminal is a touchscreen type of operator terminal that uses a 6-inch touchscreen for input and control functions. This touchscreen can support color graphics. The 2711-T6C20L1 operator terminal's touchscreen should only be operated by the users with their fingertips or with an approved stylus that is not too sharp.

Technical Specifications 

Information About 2711-T6C20L1

The Allen-Bradley 2711-T6C20L1 is a PanelView operator terminal with a 6-inch, colored display and touch operator interface. This operator terminal is a discontinued product that is used to implement machine and process automation by providing real-time monitoring of instruments installed along the system and permit control by allowing operators to touch the intended object to implement the appropriate command.

The 2711-T6C20L1 also has a single Ethernet interface, supporting 10/100 Mbps with auto-negotiation. With the single Ethernet port, it supports linear topology however, Device Level Ring (DLR) may be achieved with the use of an external switch such as Allen-Bradley ETAP and other similar devices. It has a second port which is an RS232 port with 9-pin sub-D connector used for communicating with an alarm and event printer.

This operator terminal is intended to be wired to an external DC power supply with output range of 18-32VDC. Additionally, it has a power consumption of 24 W max. (1.0A @ 24V DC) and heat dissipation of 32 Watts (107 BTU/HR). This operator terminal can be configured to communicate with legacy and mature products such as the PLC5, SLC500 and MicroLogix controllers as well as modern controllers including the CompactLogix and ControlLogix controllers.

The unit is designed to be installed in an IP54 or IP65 (NEMA Type 12, 13, NEMA 4X - indoor use only) enclosure. On the back of the device, there is a reset button to reinitiate the start of the application that is running on the display without terminating the power supply to the unit. Always press this button with a narrow, non-conductive tool. The 2711-T6C20L1 can store application backup on the memory card that is inserted in the back part of the device. The unit is shipped with approximate dimensions of 185 millimeters x 152 millimeters x 96 millimeters. During the installation, leave enough space around it for mounting, maintenance, air circulation, and memory card and legend label installation. Tighten the mounting screws in a way to make a tight and even gasket seal contact.

Manufacturer information

Allen‑Bradley components, integrated control and information solutions are built for demanding industrial applications. We integrate control and information across the enterprise to make you as productive as possible.

IQElectro 2 Year Warranty

IQElectro offers a 2-Year Warranty on all our products. This complimentary two-year warranty ensures that every purchase from IQElectro is a secure investment in the future of your company.
Warranty Terms and Conditions

IQElectro is not an authorized distributor.

IQElectro LLC (IQElectro) is NOT an Authorized Distributor or in any way affiliated with Rockwell Automation, Siemens, or any other Manufacturers. IQElectro is NOT an Authorized Dealer of this product. The product may be of older version, date codes, or design than that available from authorized dealers. As IQElectro is not an authorized dealer of this product, the Original Manufacturer's Warranty and Support DO NOT apply. IQElectro sells SURPLUS only and DOES NOT SELL SOFTWARE or FIRMWARE licenses. Some hardware products may contain software and firmware and may not be legally operated without first obtaining an appropriate license from the manufacturer. IQElectro makes no representation as to whether a product will or will not have software or firmware and, if it does, whether the software or firmware is the revision level that you need for your application. IQElectro also makes no representations as to your ability or right to download or otherwise obtain software or firmware for the product from the Original Manufacturer, its distributors, or any other source. IQElectro also makes no representations as to your right to install any such software or firmware on the product. IQElectro will not obtain or supply software or firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing software or firmware. Customer acknowledges and agrees that IQElectro DOES NOT provide any software, firmware, operating system, or right-to-use licenses with the products it sells. Customers understand and agree that proper software (firmware) licensing, maintenance, and upgrades are subject to the applicable manufacturer's Licensing Agreement or similar document. Disclaimer Policy.