2711P-T10C4A1 | Allen-Bradley PanelView Plus 1000 Touch/Enet/RS232 64MB AC

Description 

The Allen-Bradley/Rockwell Automation 2711P-T10C4A1 terminal is a Panelview Plus 1000 series operator interface terminal. It is controlled by a touchscreen which is 10 inches wide and which supports full color graphics. The 2711P-T10C4A1 operator interface terminal operates with AC voltage in a range between 85 and 264 Volts AC. It can communicate with other devices through its Etherent and RS-232 ports.

Technical Specifications 

Information About 2711P-T10C4A1

The Allen-Bradley 2711P-T10C4A1 is a PanelView Plus 1000 touch terminal. It comes with a 10.4-inch touchscreen that has a resolution of 640 x 480. Note that the 18-bit TFT color touchscreen is analog and resistive and has a total display area of 8.3 x 6.2 inches. Without an installed module, it measures 9.77 x 12.97 x 2.18 inches and weighs 5.7 pounds. Users can use bare fingers, gloved fingers, or a plastic stylus to operate the touchscreen. When using a stylus, make sure that the tip has a minimum radius of 1.3 millimeters to avoid damaging the screen. This terminal comes with a 64 MB flash memory and 64 MB RAM, as well as a status indicator that turns red when a fault is detected and green when everything is running normally.

PanelView Plus 1000 terminals come with various communication ports and the 2711P-T10C4A1, in particular, has EtherNet and RS-232 ports as well as two USB ports. Users can only use a 1761-NET-ENI communication cable for this terminal. Enclosures compatible with the 2711P-T10C4A1 terminal are the NEMA Type 12, 13, or 4X (but only when used indoors).

The typical AC power consumption of this terminal is 65 VA and its maximum AC power consumption of 160 VA. Its AC input voltage is 85 to 264 Volts AC or 47 to 63 Hertz. The terminal's nominal DC input voltage is 24 Volts DC and the input voltage ranges from 18 to 32 Volts DC. It has a typical DC power consumption of 39 W or 1.6 A at 24 Volts DC and a maximum DC power consumption of 70 W or 2.9 Amps at 24 Volts DC. Its storage temperature range is -20 to 70 degrees Celsius while its operating temperature range is 0 to 55 degrees Celsius. The operating shock of the terminal is 15 g at 11 milliseconds while non-operating shock is 30 g at 11 milliseconds. It also has a non-condensing relative humidity of 5-95%.

Manufacturer information

Allen‑Bradley components, integrated control and information solutions are built for demanding industrial applications. We integrate control and information across the enterprise to make you as productive as possible.

IQElectro 2 Year Warranty

IQElectro offers a 2-Year Warranty on all our products. This complimentary two-year warranty ensures that every purchase from IQElectro is a secure investment in the future of your company.
Warranty Terms and Conditions

IQElectro is not an authorized distributor.

IQElectro LLC (IQElectro) is NOT an Authorized Distributor or in any way affiliated with Rockwell Automation, Siemens, or any other Manufacturers. IQElectro is NOT an Authorized Dealer of this product. The product may be of older version, date codes, or design than that available from authorized dealers. As IQElectro is not an authorized dealer of this product, the Original Manufacturer's Warranty and Support DO NOT apply. IQElectro sells SURPLUS only and DOES NOT SELL SOFTWARE or FIRMWARE licenses. Some hardware products may contain software and firmware and may not be legally operated without first obtaining an appropriate license from the manufacturer. IQElectro makes no representation as to whether a product will or will not have software or firmware and, if it does, whether the software or firmware is the revision level that you need for your application. IQElectro also makes no representations as to your ability or right to download or otherwise obtain software or firmware for the product from the Original Manufacturer, its distributors, or any other source. IQElectro also makes no representations as to your right to install any such software or firmware on the product. IQElectro will not obtain or supply software or firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing software or firmware. Customer acknowledges and agrees that IQElectro DOES NOT provide any software, firmware, operating system, or right-to-use licenses with the products it sells. Customers understand and agree that proper software (firmware) licensing, maintenance, and upgrades are subject to the applicable manufacturer's Licensing Agreement or similar document. Disclaimer Policy.