2CN3000 | Reliance Electric Control Net Communications Card 179153

Description 

The 2CN3000 is a GV3000/SE AC Drive ControlNet Network Communication Option Board made by Reliance Electric. This card may have been sold by ABB and/or Baldor Reliance at one point.

Technical Specifications 

Information About 2CN3000

The 2CN3000 is an interface kit that is an optional component in a Reliance GV3000/SE controller. It is a printed circuit board assembly that has the ability to be mounted into a controller. This board is highly adaptable and has the ability to be installed in a wide array of controllers.

It connects to the regulator board using a ribbon cable and the drive power supply. It is also connected to the current feedback board using a 26-pin ribbon connector. You can find the current feedback board below the keypad on the right side. You may need to slightly move the mounting bracket that is attached to keypad a little to help you install the interface board. Once it is connected to the other components, you can then mount it to the controller using the right side of the keypad bracket. It is important to use M3 screws and lock washers to mount this board because they help to ground it. If you fail to properly ground the option board, it may result in board damage or irregular drive operation.

The main components on this board include a ControlNet network access port, network connectors, status LEDs, and an RS-232 port. The RS-232 connection port allows you to connect a serial programming device to the board, allowing it to update the flash memory.

Manufacturer information

Reliance Electric, a pioneering electrical equipment manufacturer, was founded in 1904. Acquired by Rockwell Automation, it specialized in motors, drives, and industrial automation solutions. Known for innovation, Reliance played a key role in advancing industrial technology.

IQElectro 2 Year Warranty

IQElectro offers a 2-Year Warranty on all our products. This complimentary two-year warranty ensures that every purchase from IQElectro is a secure investment in the future of your company.
Warranty Terms and Conditions

IQElectro is not an authorized distributor.

IQElectro LLC (IQElectro) is NOT an Authorized Distributor or in any way affiliated with Rockwell Automation, Siemens, or any other Manufacturers. IQElectro is NOT an Authorized Dealer of this product. The product may be of older version, date codes, or design than that available from authorized dealers. As IQElectro is not an authorized dealer of this product, the Original Manufacturer's Warranty and Support DO NOT apply. IQElectro sells SURPLUS only and DOES NOT SELL SOFTWARE or FIRMWARE licenses. Some hardware products may contain software and firmware and may not be legally operated without first obtaining an appropriate license from the manufacturer. IQElectro makes no representation as to whether a product will or will not have software or firmware and, if it does, whether the software or firmware is the revision level that you need for your application. IQElectro also makes no representations as to your ability or right to download or otherwise obtain software or firmware for the product from the Original Manufacturer, its distributors, or any other source. IQElectro also makes no representations as to your right to install any such software or firmware on the product. IQElectro will not obtain or supply software or firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing software or firmware. Customer acknowledges and agrees that IQElectro DOES NOT provide any software, firmware, operating system, or right-to-use licenses with the products it sells. Customers understand and agree that proper software (firmware) licensing, maintenance, and upgrades are subject to the applicable manufacturer's Licensing Agreement or similar document. Disclaimer Policy.