2GU22005 | Reliance Electric 5HP AC 'VS' Reliance Drive

The 2GU22005 is a 5HP 230V 7.8KVA drive, categorized as a 3-Phase AC GP2000 V*S drive. Originally developed by Reliance Electric, it is also likely distributed by Baldor Reliance or ABB. This drive is responsible for managing and adjusting the voltage, speed, and frequency of a motor. 

Featuring a faceplate with a keypad, the 2GU22005 includes a series of buttons and LEDs. Key buttons enable the operator to navigate motor speed data, while a prominent red reset/stop button and a green start button facilitate motor control. Additional buttons labeled set, mon, and pgm, along with corresponding LED indicators, offer further operational control. LED indicators provide feedback on motor direction, operational mode, and control status. Display capabilities include 2-digit and 4-digit LED indicators capable of presenting error codes, voltage, output frequencies, and motor RPM. An LED indicator for drive configuration is also included. 

The 2GU22005 is a 5HP 230V 7.8KVA drive, part of the 3-Phase AC GP2000 V*S drive series. Originally developed by Reliance Electric, it may also have been distributed by Baldor Reliance or ABB. This drive is responsible for regulating and adjusting the voltage, speed, and frequency of a motor. 

The faceplate of the 2GU22005 features a keypad with multiple buttons and LEDs. It includes keys for scrolling through motor speed data, a large red reset/stop button, and a green start button. Additionally, there are buttons labeled set, mon, and pgm, accompanied by corresponding LED indicators. Other LED indicators and buttons include fwd/rev, run/jog, auto/man, and local and remote control indicators. The drive also incorporates a 2-digit and 4-digit LED indicator capable of displaying error codes, voltage, output frequencies, and motor RPM. A drive configuring LED is also present. 

Upon inspection, the internal components of the 2GU22005 reveal an array of elements. The keypad described above is connected to a regulator via CN1 and CN2 connectors. This regulator interfaces with various components, including a leakage current sensor, fan, power supply with a base driver, and two ACCTs. Optional kits can be attached to the regulator using CN connectors. Additional components include a precharge relay, diode cube, bus clamp, voltage-detecting resistor, and transistor module.