620L 0022 400 0010 UK ENW 0000 000 B0 000 000 | Eurotherm Drives Vector Drive

Description 

The Eurotherm 620L 0022 400 0010 UK ENW 0000 000 B0 000 000 enables speed control of induction motors with an encoder. It also provides for a co-processor and ports for a fibre optic communications network.

Technical Specifications 

Information About 620L 0022 400 0010 UK ENW 0000 000 B0 000 000

When you install the Eurotherm 620L 0022 400 0010 UK ENW 0000 000 B0 000 000 you have to wire the power cables and control cables. When you plan and install the power cables, you have to follow all local and national standards and codes. In fact, it is best practice to exceed all standards and codes. In addition to the standards and codes, consider the following guidelines.

The power cables must be rated as exceeding the expected supply current by 110 percent.

Route the power cables away from all signal cables. This applies to setpoint or feedback cables, motor feedback cables, and cables from other equipment in the plant.

Use shielded cable to avoid causing interference to other equipment. The main power supply must be 3-phase power and must meet the specifications listed for the device.

The control wiring carries the signals used to control the motor and all other equipment. Use 18 gauge wire for the control cables. The control cables for speed demand are connected to the speed inputs. You can use the control panel to set the motor speed.

If an error is detected concerning the motor speed, an error or alarm is displayed on the control panel and an LED provides more information.

Manufacturer information

Eurotherm Drives, a division of Schneider Electric, specializes in delivering reliable and innovative motor control solutions for industrial applications. With a focus on quality and performance, Eurotherm Drives serves diverse industries worldwide, ensuring efficient and optimized operations.

IQElectro 2 Year Warranty

IQElectro offers a 2-Year Warranty on all our products. This complimentary two-year warranty ensures that every purchase from IQElectro is a secure investment in the future of your company.
Warranty Terms and Conditions

IQElectro is not an authorized distributor.

IQElectro LLC (IQElectro) is NOT an Authorized Distributor or in any way affiliated with Rockwell Automation, Siemens, or any other Manufacturers. IQElectro is NOT an Authorized Dealer of this product. The product may be of older version, date codes, or design than that available from authorized dealers. As IQElectro is not an authorized dealer of this product, the Original Manufacturer's Warranty and Support DO NOT apply. IQElectro sells SURPLUS only and DOES NOT SELL SOFTWARE or FIRMWARE licenses. Some hardware products may contain software and firmware and may not be legally operated without first obtaining an appropriate license from the manufacturer. IQElectro makes no representation as to whether a product will or will not have software or firmware and, if it does, whether the software or firmware is the revision level that you need for your application. IQElectro also makes no representations as to your ability or right to download or otherwise obtain software or firmware for the product from the Original Manufacturer, its distributors, or any other source. IQElectro also makes no representations as to your right to install any such software or firmware on the product. IQElectro will not obtain or supply software or firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing software or firmware. Customer acknowledges and agrees that IQElectro DOES NOT provide any software, firmware, operating system, or right-to-use licenses with the products it sells. Customers understand and agree that proper software (firmware) licensing, maintenance, and upgrades are subject to the applicable manufacturer's Licensing Agreement or similar document. Disclaimer Policy.