6KXC111F12X9A1 | GE Fuji 200-240V .125HP Drive

The 6KXC111F12X9A1 is a GE AF-300 Mini Drive designed for industrial applications requiring precise motor control. This drive operates at a voltage range of 200-240V and is rated at 0.125 HP, making it suitable for low-power applications. The corresponding model for this drive is the Fuji Model FRN0.1C1S-6. The enclosure type is IP20, indicating that the unit is protected against solid objects larger than 12.5 mm but is not protected against water ingress.

The drive is designed for single-phase operation at 115 VAC with a frequency of 50/60 Hz. Its compact dimensions are 4.72 inches in height, 3.15 inches in width, and 3.94 inches in depth. The unit weighs approximately 1.3 pounds, allowing for easy installation in tight spaces. The drive includes a keypad for user interface, facilitating easy configuration and monitoring of drive parameters.

The 6KXC111F12X9A1 has a rated output current of 0.7 amps and can handle a rated overload of 1.1 amps, equivalent to 150% of its nominal capacity. This feature ensures that the drive can handle short periods of increased load without compromising performance. The operating temperature range for this drive is between -10 to +50 degrees Celsius, making it suitable for use in environments with moderate temperature variations. The unit is designed to operate in humidity levels ranging from 5% to 95%, provided the humidity is non-condensing.

The drive is housed in an IP20-rated enclosure, which provides basic protection against solid objects but requires installation in environments free from moisture and dust. The drive should not be exposed to conditions where condensation could form, as this may lead to operational failures or damage to internal components. The heat sink within the drive may reach temperatures up to 90 degrees Celsius during operation, necessitating mounting on materials that can withstand such temperatures.

Proper installation of the 6KXC111F12X9A1 requires adherence to specified clearances: 4 inches above and below the unit and 0.4 inches on either side. The terminal connections must be tightened to a torque of 10.6 lb-inches to ensure secure electrical connections. It is crucial to properly ground the unit to prevent potential fire hazards or electrical shocks. For additional safety and operational guidelines, users should refer to the GE/Fuji manuals and user guides specific to this model.