.svg?v=180920048278408794651792026160){kind=small}
ClimateMaster 17B0001N01 CXM Heat Pump Control Board 24VAC for Water-Source and Geothermal HVAC Systems
- Regular price
- $725.00
- Sale price
- $725.00
- Regular price
-
Couldn't load pickup availability
Product Description P/N: 17B0001N01
Description
The ClimateMaster 17B0001N01 is an OEM heat pump control board designed to manage operating functions in compatible ClimateMaster HVAC equipment. This electronic circuit board coordinates heating and cooling control signals, monitors connected safety devices, and supports equipment operating sequences. Its integrated control circuitry is intended for replacement applications in heat pump systems requiring the specified board assembly.
Technical Specifications
|
Condition |
New/Never Used Surplus |
|
Brand |
ClimateMaster (Carrier HVAC) |
|
Category |
HVAC & Building Automation |
|
Part Number |
17B0001N01 |
|
Subcategory |
Heat Pump Control Boards |
|
Product Series |
CXM |
|
Product Type |
Microprocessor-Based Heat Pump Controller |
|
Application |
Water-Source and Geothermal Heat Pumps |
|
Control Voltage |
24 VAC, 50/60 Hz |
|
Power Consumption |
5 VA Typical, 9 VA Maximum |
|
Transformer Requirement |
Dedicated 24 VAC, Minimum 40 VA |
|
Compressor Relay Rating |
40 VA at 24 VAC |
|
Alarm Relay Rating |
28 VA at 24 VAC |
|
Operating Temperature |
-40°F to 176°F |
|
Operating Humidity |
Up to 95% RH, Non-Condensing |
|
Protective Functions |
High/Low Pressure, Low Coil Temperature, Voltage Protection |
|
Additional Functions |
Anti-Short-Cycle, Random Start, Condensate Overflow Detection |
|
Diagnostic Interface |
Status LED and Test Mode |
|
Weight |
Approximately 1 lb |
Information About 17B0001N01
The 17B0001N01 is a ClimateMaster electronic heat pump control board used in selected HVAC systems. Its printed circuit board construction incorporates electronic components and electrical connections for interfacing with equipment sensors, control circuits, and operating devices. The board is intended for compatible ClimateMaster heat pump configurations, with exact model compatibility determined by the equipment service documentation and original part number. Its control architecture supports thermostat signal processing, compressor operation management, safety circuit monitoring, and coordinated heating and cooling functions.
Key Features:
-
OEM ClimateMaster Component: Replacement heat pump circuit board identified by part number 17B0001N01.
-
Heat Pump Control: Coordinates electrical control functions in compatible heating and cooling equipment.
-
Electronic Control Circuitry: Processes operating signals through integrated circuit board components.
-
Thermostat Interface: Supports connection to compatible HVAC thermostat control circuits.
-
Compressor Control Coordination: Manages compressor operating requests through the equipment control system.
-
Safety Circuit Monitoring: Interfaces with designated protective devices and safety switches.
-
Heating and Cooling Sequencing: Supports transitions between operating modes according to system requirements.
-
Equipment Signal Processing: Receives and processes control inputs from connected HVAC components.
-
Internal Equipment Installation: Designed for mounting within the designated heat pump control compartment.
-
Service Replacement Application: Intended to replace the corresponding factory-specified circuit board.
-
Model-Specific Compatibility: Requires confirmation of the equipment model, wiring arrangement, and original board identification.
The 17B0001N01 delivers the reliability and precision required for heat pump operating control, compressor sequencing, safety monitoring, and coordinated HVAC system management.
Description
The ClimateMaster 17B0001N01 is an OEM heat pump control board designed to manage operating functions in compatible ClimateMaster HVAC equipment. This electronic circuit board coordinates heating and cooling control signals, monitors connected safety devices, and supports equipment operating sequences. Its integrated control circuitry is intended for replacement applications in heat pump systems requiring the specified board assembly.
Technical Specifications
|
Condition |
New/Never Used Surplus |
|
Brand |
ClimateMaster (Carrier HVAC) |
|
Category |
HVAC & Building Automation |
|
Part Number |
17B0001N01 |
|
Subcategory |
Heat Pump Control Boards |
|
Product Series |
CXM |
|
Product Type |
Microprocessor-Based Heat Pump Controller |
|
Application |
Water-Source and Geothermal Heat Pumps |
|
Control Voltage |
24 VAC, 50/60 Hz |
|
Power Consumption |
5 VA Typical, 9 VA Maximum |
|
Transformer Requirement |
Dedicated 24 VAC, Minimum 40 VA |
|
Compressor Relay Rating |
40 VA at 24 VAC |
|
Alarm Relay Rating |
28 VA at 24 VAC |
|
Operating Temperature |
-40°F to 176°F |
|
Operating Humidity |
Up to 95% RH, Non-Condensing |
|
Protective Functions |
High/Low Pressure, Low Coil Temperature, Voltage Protection |
|
Additional Functions |
Anti-Short-Cycle, Random Start, Condensate Overflow Detection |
|
Diagnostic Interface |
Status LED and Test Mode |
|
Weight |
Approximately 1 lb |
Information About 17B0001N01
The 17B0001N01 is a ClimateMaster electronic heat pump control board used in selected HVAC systems. Its printed circuit board construction incorporates electronic components and electrical connections for interfacing with equipment sensors, control circuits, and operating devices. The board is intended for compatible ClimateMaster heat pump configurations, with exact model compatibility determined by the equipment service documentation and original part number. Its control architecture supports thermostat signal processing, compressor operation management, safety circuit monitoring, and coordinated heating and cooling functions.
Key Features:
-
OEM ClimateMaster Component: Replacement heat pump circuit board identified by part number 17B0001N01.
-
Heat Pump Control: Coordinates electrical control functions in compatible heating and cooling equipment.
-
Electronic Control Circuitry: Processes operating signals through integrated circuit board components.
-
Thermostat Interface: Supports connection to compatible HVAC thermostat control circuits.
-
Compressor Control Coordination: Manages compressor operating requests through the equipment control system.
-
Safety Circuit Monitoring: Interfaces with designated protective devices and safety switches.
-
Heating and Cooling Sequencing: Supports transitions between operating modes according to system requirements.
-
Equipment Signal Processing: Receives and processes control inputs from connected HVAC components.
-
Internal Equipment Installation: Designed for mounting within the designated heat pump control compartment.
-
Service Replacement Application: Intended to replace the corresponding factory-specified circuit board.
-
Model-Specific Compatibility: Requires confirmation of the equipment model, wiring arrangement, and original board identification.
The 17B0001N01 delivers the reliability and precision required for heat pump operating control, compressor sequencing, safety monitoring, and coordinated HVAC system management.
