DS200CPCAG1ABB | General Electric Mark V Contactor Pilot Board

Description 

The GE Contactor Pilot Board DS200CPCAG1ABB is equipped with one 12-pin connector and two 2-pin connectors, along with four terminal blocks capable of accommodating up to twelve signal wires. Additionally, it incorporates a 24VDC 15A socket power relay. Installation of the board warrants careful handling, particularly concerning the relay's susceptibility to damage due to its internal moving parts. During installation within the drive cabinet, precautionary measures must be observed to prevent collision with metal structures or other components, as the relay protrudes from the board's surface. Alignment of the board with the screws on the rack and securing with appropriate tightness is essential, ensuring avoidance of over-tightening that may result in board damage. Utilization of washers, if provided or previously used, is recommended. Subsequent to board fixation, insertion of wires into the terminal blocks and connectors should be conducted diligently, with screws tightened securely to prevent loosening. Cables should be handled by the connector and inserted firmly into the appropriate receptacle to ensure full seating. 

Technical Specifications 

Information About DS200CPCAG1ABB

The GE Contactor Pilot Board DS200CPCAG1ABB is equipped with one 12-pin connector and two 2-pin connectors, facilitating connectivity. Additionally, it incorporates four terminal blocks capable of accommodating a maximum of twelve signal wires. Further, the board is furnished with a 24VDC 15A socket power relay. 

Installation of the board necessitates meticulous handling, particularly regarding the relay's susceptibility to damage due to its internal moving parts. The relay's elevated position exposes it to potential collisions with the drive cabinet's internal components or metal structures, thus requiring careful consideration during installation. When inserting the board into the drive cabinet, ensuring clear visibility of both the board and the cabinet's interior is imperative. Alignment with the screws on the rack should be achieved gradually, and screws must be inserted and tightened cautiously to avoid over-tightening, which may lead to board damage. The use of washers, if provided or previously utilized on a defective board, is advisable to mitigate the risk of damage. 

Subsequent to board fixation, the screws on the terminal blocks should be loosened to facilitate the insertion of wires into the appropriate terminals. Wires should be held in place within the terminal while tightening the screws to ensure secure connections. Cables should be handled by the connector and inserted firmly into the designated receptacles, with gentle pressure applied to ensure full seating. 

Manufacturer information

General Electric (GE) is a multinational conglomerate founded in 1892, based in the United States. It operates in various industries, including aviation, healthcare, renewable energy, and power. GE is known for its innovations in technology, manufacturing, and infrastructure solutions.

IQElectro 2 Year Warranty

IQElectro offers a 2-Year Warranty on all our products. This complimentary two-year warranty ensures that every purchase from IQElectro is a secure investment in the future of your company.
Warranty Terms and Conditions

IQElectro is not an authorized distributor.

IQElectro LLC (IQElectro) is NOT an Authorized Distributor or in any way affiliated with Rockwell Automation, Siemens, or any other Manufacturers. IQElectro is NOT an Authorized Dealer of this product. The product may be of older version, date codes, or design than that available from authorized dealers. As IQElectro is not an authorized dealer of this product, the Original Manufacturer's Warranty and Support DO NOT apply. IQElectro sells SURPLUS only and DOES NOT SELL SOFTWARE or FIRMWARE licenses. Some hardware products may contain software and firmware and may not be legally operated without first obtaining an appropriate license from the manufacturer. IQElectro makes no representation as to whether a product will or will not have software or firmware and, if it does, whether the software or firmware is the revision level that you need for your application. IQElectro also makes no representations as to your ability or right to download or otherwise obtain software or firmware for the product from the Original Manufacturer, its distributors, or any other source. IQElectro also makes no representations as to your right to install any such software or firmware on the product. IQElectro will not obtain or supply software or firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing software or firmware. Customer acknowledges and agrees that IQElectro DOES NOT provide any software, firmware, operating system, or right-to-use licenses with the products it sells. Customers understand and agree that proper software (firmware) licensing, maintenance, and upgrades are subject to the applicable manufacturer's Licensing Agreement or similar document. Disclaimer Policy.