DS200GGXAG1A | General Electric GTO Distribution Board

Description 

The DS200GGXAG1A Mark V Series GTO Distribution Board was manufactured by respected retailer General Electric.

Technical Specifications 

Information About DS200GGXAG1A

The DS200GGXAG1A is a GTO Distribution Board manufactured by General Electric for use within the Mark V system. The Mark V was one of the last of GE’s Speedtronic gas/steam turbine control systems to be distributed by the esteemed industrial company. It featured built-in diagnostics, online maintenance, and TMR architecture that significantly reduced downtime caused by outdated hardware. Mark V systems can also be set up in Simplex form when that better suits the situation, although the Mark V Series has traditionally functioned using GE's patented Speedtronic technology.


Hardware Tips and Specifications

The DS200GGXAG1A is typically used within the AC2000 system, a subseries of this GTO Distribution Board's greater Mark V product series. The board is populated by a variety of components, including a dozen stab-on connectors, four cable connectors (vertical pin,) header connectors, and fourteen high-speed connectors. There are six resistor network arrays, sixteen jumper switches, transistors, a single heat sink located in the upper right corner, a transformer, and over ten integrated circuits also included in the assembly of this product. Four of these aforementioned circuits are mounted over slots in the board’s surface. In terms of various voltage-limiting and storing components, this DS200GGXAG1A board also has both metal film and carbon composite resistors, various capacitors (ceramic disk, high-voltage electrolytic, small ceramic,) and diodes. Board components in the internal assembly of this DS200GGXAG1A GTO Distribution Board are marked with reference designators, with two total board edges marked to allow for easy alignment during installation.

Before making an original purchase of this DS200GGXAG1A Mark V Series printed circuit board, it is important to realize that this DS200GGXAG1A PCB is not actually the original GTO Distribution Board manufactured to exist within the Mark V Series; that would be the DS200GGXAG1 parent printed circuit board missing the single functional revision applied to this DS200GGXAG1A GTO Distribution Board. The functional revision adhered to the internal assembly of this DS200GGXAG1A PCB is classified as a functional revision as it increases the overall functionality and performance specifications of the product without making any sacrifices for the sake of durability or aesethetic quality.

Manufacturer information

General Electric (GE) is a multinational conglomerate founded in 1892, based in the United States. It operates in various industries, including aviation, healthcare, renewable energy, and power. GE is known for its innovations in technology, manufacturing, and infrastructure solutions.

IQElectro 2 Year Warranty

IQElectro offers a 2-Year Warranty on all our products. This complimentary two-year warranty ensures that every purchase from IQElectro is a secure investment in the future of your company.
Warranty Terms and Conditions

IQElectro is not an authorized distributor.

IQElectro LLC (IQElectro) is NOT an Authorized Distributor or in any way affiliated with Rockwell Automation, Siemens, or any other Manufacturers. IQElectro is NOT an Authorized Dealer of this product. The product may be of older version, date codes, or design than that available from authorized dealers. As IQElectro is not an authorized dealer of this product, the Original Manufacturer's Warranty and Support DO NOT apply. IQElectro sells SURPLUS only and DOES NOT SELL SOFTWARE or FIRMWARE licenses. Some hardware products may contain software and firmware and may not be legally operated without first obtaining an appropriate license from the manufacturer. IQElectro makes no representation as to whether a product will or will not have software or firmware and, if it does, whether the software or firmware is the revision level that you need for your application. IQElectro also makes no representations as to your ability or right to download or otherwise obtain software or firmware for the product from the Original Manufacturer, its distributors, or any other source. IQElectro also makes no representations as to your right to install any such software or firmware on the product. IQElectro will not obtain or supply software or firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing software or firmware. Customer acknowledges and agrees that IQElectro DOES NOT provide any software, firmware, operating system, or right-to-use licenses with the products it sells. Customers understand and agree that proper software (firmware) licensing, maintenance, and upgrades are subject to the applicable manufacturer's Licensing Agreement or similar document. Disclaimer Policy.