DS200IMCPG1C | General Electric Power Supply Interface Board

Description 

This DS200IMCPG1C Power Supply Interface Board from GE was manufactured for the Mark V Turbine Control System Series.

Technical Specifications 

Information About DS200IMCPG1C

This DS200IMCPG1C printed circuit board or PCB for short was originally manufactured by General Electric to exist as a member of their Mark V Turbine Control System Series, as mentioned above. As alluded to through its full name, the Mark V Series has specific appications in the control and management systems of wind, steam and gas turbine automated drive assemblies, and exists as a legacy series due to its eventual discontinuation by the original manufacturer in the years following its initial release. While considered a General Electric legacy series, the Mark V Series is also one of the final General Electric Mark Series to feature their patented Speedtronic technology in its products. This DS200IMCPG1C printed circuit board is better-definable by its official functional product description as a Power Supply Interface Board, as it appears in original General Electric and Mark V Turbine Control System Series instructional manual information. While existing as a Power Supply Interface Board in its own right, this DS200IMCPG1C PCB is by no means considered the original product of its functionality created for the Mark V Series; that would be the DS200IMCPG1 parent Power Supply Interface Board missing this DS200IMCPG1C product's C-rated functional product revision.

Hardware Tips and Specifications

The GE IAC2000I Power Supply Interface Board DS200IMCPG1C can be connected through a cable to the DS200SDCC Drive Control Board. Connect the cable to the 1PL connector on the Drive Control Board. The GE IAC2000I Power Supply Interface Board DS200IMCPG1C has 8 fuses that protect the board components from over voltage conditions. The above information represents about the extent of original DS200IMCPG1C board information available in factory-printed instructional manual documentation. With that being said, the DS200IMCPG1C functional product number itself is a strong source of DS200IMCPG1C-specific hardware information, coding for details such as this DS200IMCPG1C PCB's:

Normal Mark V Series assembly version
Domestic location of original GE manufacture
IMCP functional product acronym
Normal style of PCB protective coating
Group one Mark V Series grouping
C-rated primary functional revision

When you replace a DS200IMCPG1C board, it is crucial to inspect the blown fuses to obtain information about the type of fuse to use as a replacement fuse. You can also refer to the written information that came with the board for a list of replacement fuses. Make sure you only replace a fuse in the assembly of this DS200IMCPG1C PCB with an exact match. Failure to use an exact match might cause components to be damaged on the board by subjecting them to high voltage. It is easy to identify a blown fuse because in a blown fuse the contact inside the fuse has melted. All that is required to replace the fuse is to pull the fuse out of the connector and press the replacement in the connector. The fuse can be replaced without removing the board from the board cabinet.  So, all that is required before you begin is to turn off all power to the drive. If you find that the same fuse blows frequently, it is best practice to perform a diagnostic test on the drive to determine the reason for the blown fuses. Once the cause is determined, you can expect your drive to operate at peak efficiency and perform trouble free.

Manufacturer information

General Electric (GE) is a multinational conglomerate founded in 1892, based in the United States. It operates in various industries, including aviation, healthcare, renewable energy, and power. GE is known for its innovations in technology, manufacturing, and infrastructure solutions.

IQElectro 2 Year Warranty

IQElectro offers a 2-Year Warranty on all our products. This complimentary two-year warranty ensures that every purchase from IQElectro is a secure investment in the future of your company.
Warranty Terms and Conditions

IQElectro is not an authorized distributor.

IQElectro LLC (IQElectro) is NOT an Authorized Distributor or in any way affiliated with Rockwell Automation, Siemens, or any other Manufacturers. IQElectro is NOT an Authorized Dealer of this product. The product may be of older version, date codes, or design than that available from authorized dealers. As IQElectro is not an authorized dealer of this product, the Original Manufacturer's Warranty and Support DO NOT apply. IQElectro sells SURPLUS only and DOES NOT SELL SOFTWARE or FIRMWARE licenses. Some hardware products may contain software and firmware and may not be legally operated without first obtaining an appropriate license from the manufacturer. IQElectro makes no representation as to whether a product will or will not have software or firmware and, if it does, whether the software or firmware is the revision level that you need for your application. IQElectro also makes no representations as to your ability or right to download or otherwise obtain software or firmware for the product from the Original Manufacturer, its distributors, or any other source. IQElectro also makes no representations as to your right to install any such software or firmware on the product. IQElectro will not obtain or supply software or firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing software or firmware. Customer acknowledges and agrees that IQElectro DOES NOT provide any software, firmware, operating system, or right-to-use licenses with the products it sells. Customers understand and agree that proper software (firmware) licensing, maintenance, and upgrades are subject to the applicable manufacturer's Licensing Agreement or similar document. Disclaimer Policy.