DS200IMCPG1CDB | General Electric Power Supply Interface Board

Description 

This General Electric-manufactured Power Supply Interface Board was originally created for their Mark V Series.

Technical Specifications 

Information About DS200IMCPG1CDB

This DS200IMCPG1CDB Power Supply Interface Board is an important part of its Mark V Series, as explained above. The Mark V Series was originally developed and produced by the trusted industry giant General Electric, as a series of turbine control systems and turbine control system component parts. It is important to realize that this DS200IMCPG1CDB Power Supply Interface Board is not actually a base-produced version of this General Electric Mark V Series product, as the DS200IMCPG1 Power Supply Interface Board exists without the three significant product revisions made to this specific PCB.

Hardware Tips and Specifications

Unfortunately for our sake, this DS200IMCPG1CDB Power Supply Interface Board's specific hardware makeup and specifications need to be partially theorized, given the lack of pertinent original instructional manual materials available for research purposes on the internet. With this being said, is quite lucky that this is categorized as a General Electric product, as its DS200IMCPG1CDB functional product number reveals a lot about this particular PCB. In combination with Mark V Series materials that do exist, a customized product page for this DS200IMCPG1CDB Power Supply Interface Board is possible. The GE IAC2000I Power Supply Interface Board DS200IMCPG1CDB can be connected through a cable to the DS200SDCC Drive Control Board. In order to initiate this connection, one must connect the cable to the 1PL connector on the Drive Control Board. The GE IAC2000I Power Supply Interface Board DS200IMCPG1CDB is engineered to operate under conditions with high-voltage current and it is equipped with eight fuses to protect it from overcurrent. It is important to check the fuses if you suspect one is blown; you can easily locate the fuses and check the contact in each fuse and see if it is intact.

To replace a fuse you must remove all current to the drive. The best practice is to remove the fuses of the power supplies that provide power to the drive; in order to avoid potentially lethal surface voltages. The next step after removing power from the DS200IMCPG1CDB board is to use a testing device to check for the presence of power. Make sure the tester is appropriately calibrated for the purpose and is approved by a certifying organization, and that the tester probes are in good condition and any insulation is not worn or frayed. When you are sure no current is present, General Electric instructional materials suggest to use one hand to remove the blown fuse from the connector, before pressing an identical fuse into the connector.

Manufacturer information

General Electric (GE) is a multinational conglomerate founded in 1892, based in the United States. It operates in various industries, including aviation, healthcare, renewable energy, and power. GE is known for its innovations in technology, manufacturing, and infrastructure solutions.

IQElectro 2 Year Warranty

IQElectro offers a 2-Year Warranty on all our products. This complimentary two-year warranty ensures that every purchase from IQElectro is a secure investment in the future of your company.
Warranty Terms and Conditions

IQElectro is not an authorized distributor.

IQElectro LLC (IQElectro) is NOT an Authorized Distributor or in any way affiliated with Rockwell Automation, Siemens, or any other Manufacturers. IQElectro is NOT an Authorized Dealer of this product. The product may be of older version, date codes, or design than that available from authorized dealers. As IQElectro is not an authorized dealer of this product, the Original Manufacturer's Warranty and Support DO NOT apply. IQElectro sells SURPLUS only and DOES NOT SELL SOFTWARE or FIRMWARE licenses. Some hardware products may contain software and firmware and may not be legally operated without first obtaining an appropriate license from the manufacturer. IQElectro makes no representation as to whether a product will or will not have software or firmware and, if it does, whether the software or firmware is the revision level that you need for your application. IQElectro also makes no representations as to your ability or right to download or otherwise obtain software or firmware for the product from the Original Manufacturer, its distributors, or any other source. IQElectro also makes no representations as to your right to install any such software or firmware on the product. IQElectro will not obtain or supply software or firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing software or firmware. Customer acknowledges and agrees that IQElectro DOES NOT provide any software, firmware, operating system, or right-to-use licenses with the products it sells. Customers understand and agree that proper software (firmware) licensing, maintenance, and upgrades are subject to the applicable manufacturer's Licensing Agreement or similar document. Disclaimer Policy.