DS200TBQAG1A | General Electric Thermocouple Termination Module

Description 

The GE RST Terminal Board DS200TBQAG1A is equipped with 2 90-pin terminal blocks, labeled TB1 and TB2, capable of accommodating up to 180 signal wires. Additionally, it features 3 20-pin connectors for enhanced connectivity. To ensure secure installation, the board is designed with five screw holes for attachment within the board rack. 

Due to its weight, stemming from the terminal blocks and multiple signal wires, proper securing to the rack is essential. During installation or removal, adherence to guidelines is imperative. 

Each terminal is assigned an ID, and when disconnecting wires, it's advised to label them for easy reconnection. Care should be taken to loosen screws just enough to remove wires without dislodging the screw. 

Furthermore, the board includes two 20-pin connectors for ribbon-type cable connection. During disconnection, it's crucial to handle only the connector portion of the cable to prevent inadvertent wire disconnection. 

Technical Specifications 

Information About DS200TBQAG1A

The GE RST Terminal Board DS200TBQAG1A is equipped with 2 90-pin terminal blocks, allowing for the accommodation of up to 180 signal wires. These terminal blocks are designated as TB1 and TB2 for identification purposes. Additionally, the DS200TBQAG1A comprises 3 20-pin connectors, enhancing its versatility in signal connections. To ensure secure attachment within the board rack, the DS200TBQAG1A features five screw holes for stabilization. 

Due to the presence of terminal blocks and numerous signal wires, the DS200TBQAG1A exhibits substantial weight, necessitating careful and secure attachment to the rack. Proper guidelines should be adhered to when installing or removing the board to prevent damage or misalignment. 

Each terminal is assigned a unique ID for easy identification of connected signal wires. It is recommended to label each terminal with its corresponding ID using a strip of paper or tape. During wire removal, a small screwdriver should be used to loosen the securing screw just enough to detach the wire without dislodging the screw. 

Moreover, the DS200TBQAG1A features two 20-pin connectors designed to interface with a ribbon-type cable. When disconnecting the ribbon cable, it is crucial to grasp only the connector portion to avoid inadvertently pulling out wires from the connector, which could lead to signal loss. 

Manufacturer information

General Electric (GE) is a multinational conglomerate founded in 1892, based in the United States. It operates in various industries, including aviation, healthcare, renewable energy, and power. GE is known for its innovations in technology, manufacturing, and infrastructure solutions.

IQElectro 2 Year Warranty

IQElectro offers a 2-Year Warranty on all our products. This complimentary two-year warranty ensures that every purchase from IQElectro is a secure investment in the future of your company.
Warranty Terms and Conditions

IQElectro is not an authorized distributor.

IQElectro LLC (IQElectro) is NOT an Authorized Distributor or in any way affiliated with Rockwell Automation, Siemens, or any other Manufacturers. IQElectro is NOT an Authorized Dealer of this product. The product may be of older version, date codes, or design than that available from authorized dealers. As IQElectro is not an authorized dealer of this product, the Original Manufacturer's Warranty and Support DO NOT apply. IQElectro sells SURPLUS only and DOES NOT SELL SOFTWARE or FIRMWARE licenses. Some hardware products may contain software and firmware and may not be legally operated without first obtaining an appropriate license from the manufacturer. IQElectro makes no representation as to whether a product will or will not have software or firmware and, if it does, whether the software or firmware is the revision level that you need for your application. IQElectro also makes no representations as to your ability or right to download or otherwise obtain software or firmware for the product from the Original Manufacturer, its distributors, or any other source. IQElectro also makes no representations as to your right to install any such software or firmware on the product. IQElectro will not obtain or supply software or firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing software or firmware. Customer acknowledges and agrees that IQElectro DOES NOT provide any software, firmware, operating system, or right-to-use licenses with the products it sells. Customers understand and agree that proper software (firmware) licensing, maintenance, and upgrades are subject to the applicable manufacturer's Licensing Agreement or similar document. Disclaimer Policy.