DS200TBQGG1A | General Electric Gas Turbine Termination Card

Description 

The DS200TBQGG1A Gas Turbine Termination Card was manufactured for General Electric's Mark V Series of turbine control systems.

Technical Specifications 

Information About DS200TBQGG1A

This DS200TBQGG1A printed circuit board from the respected industrial manufacturer General Electric is a unique printed circuit board or PCB product offering that exists specifically as a member of the Mark V Series of wind turbine control systems and related automated drive products. As mentioned earlier, this DS200TBQGG1A PCB is more explicitly definable by its original instructional manual-introduced functional description as a Gas Turbine Termination Card. While this DS200TBQGG1A PCB exists as a Gas Turbine Termination Card, it is not the original Gas Turbine Termination Card offered as a member of General Electric's Mark V Turbine Control System Series; that would be the DS200TBQGG1 parent printed circuit board missing this DS200TBQGG1A product's singular A-rated functionality-enhancing product revision.

Hardware Tips and Specifications

As alluded to earlier, many specific hardware component inclusions and specifications contribute towards this DS200TBQGG1A product's intended functionality. The GE Gas Turbine Termination Board DS200TBQGG1A's assembly features 2 terminal blocks. Each block contains 95 terminals for signal wires. The GE Gas Turbine Termination Board DS200TBQGG1A also contains 2 jumpers, and 6 34-pin connectors. The board is 11.25 inches wide and 3 inches high and it contains 5 holes for attaching the board to the interior of the drive. The interior of the drive cabinet contains racks which are used to support the boards and have screws holes that align with the holes on the board. When you are ready to install the replacement board, examine the cabinet and notice where the old board is installed. The best practice, as outlined in original manufacturer installation manuals, is to install the replacement in the same position. It is also important to notice where the cables are connected on the board and how the cables are routed. This also applies to the signal wires attached to the terminals, as improper cable routing will inhibit or block the free flow of air inside the drive; the components in the DS200TBQGG1A PCB's Mark V Series automated drive generate heat and the drive uses airflow to keep the interior of the drive cool. If the interior become too hot, the drive will issue an overheat condition and cause the drive to shutdown automatically. Another benefit of cable routing is that power cables cause interference with signal cables if the two types of cables are routed too close to each other. Interference can also occur if the signal cables and the power cables run in parallel. Proper cable routing will prevent this interference from developing.

Manufacturer information

General Electric (GE) is a multinational conglomerate founded in 1892, based in the United States. It operates in various industries, including aviation, healthcare, renewable energy, and power. GE is known for its innovations in technology, manufacturing, and infrastructure solutions.

IQElectro 2 Year Warranty

IQElectro offers a 2-Year Warranty on all our products. This complimentary two-year warranty ensures that every purchase from IQElectro is a secure investment in the future of your company.
Warranty Terms and Conditions

IQElectro is not an authorized distributor.

IQElectro LLC (IQElectro) is NOT an Authorized Distributor or in any way affiliated with Rockwell Automation, Siemens, or any other Manufacturers. IQElectro is NOT an Authorized Dealer of this product. The product may be of older version, date codes, or design than that available from authorized dealers. As IQElectro is not an authorized dealer of this product, the Original Manufacturer's Warranty and Support DO NOT apply. IQElectro sells SURPLUS only and DOES NOT SELL SOFTWARE or FIRMWARE licenses. Some hardware products may contain software and firmware and may not be legally operated without first obtaining an appropriate license from the manufacturer. IQElectro makes no representation as to whether a product will or will not have software or firmware and, if it does, whether the software or firmware is the revision level that you need for your application. IQElectro also makes no representations as to your ability or right to download or otherwise obtain software or firmware for the product from the Original Manufacturer, its distributors, or any other source. IQElectro also makes no representations as to your right to install any such software or firmware on the product. IQElectro will not obtain or supply software or firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing software or firmware. Customer acknowledges and agrees that IQElectro DOES NOT provide any software, firmware, operating system, or right-to-use licenses with the products it sells. Customers understand and agree that proper software (firmware) licensing, maintenance, and upgrades are subject to the applicable manufacturer's Licensing Agreement or similar document. Disclaimer Policy.