DS3800NTCF | General Electric Thermocouple Condition Board

Description 

DS3800NTCF is a Thermocouple Condition Board manufactured and designed by General Electrics. It is a part of the Mark IV Series used in Gas Turbine Control Systems.

Technical Specifications 

Information About DS3800NTCF

The DS3800NTCF is a PCB created by GE for the MKIV Speedtronic series. This series was designed for steam/gas turbine control and is built upon triple-redundant back-ups on all critical controls and protection parameters.

The DS3800NTCF is designed to function as a Thermocouple condition card. The MKIV is designed to accept several of these boards, which are used to measure the temperature from turbines or other machines to a controller (computer) for high-temperature safety shutdown and process control. The temperatures measured by thermocouple cards will also be passed on to interface modules for monitoring and display purposes.

The DS3800NTCF has two connectors for communicating with other boards. These are marked 218A4637-P4 8933 (a male connector located to the right,) and 218A4553-1 Amp 533002-1 8931 (a right-angled connector located to the left.) The boards is numbered by tens behind the second connector.

The DS3800NTCF has four potentiometers, one resistor network, five jumper switches, and seven test points. Resistor networks are sometimes used to accomplish voltage division.

The DS3800NTCF is installed with two extractor clips. These help technicians install or extract the board from tight locations with no damage to components or wiring, as the nylon clips give them both a handle to grasp and a lever point to pull the board from its position.

The DS3800NTCF is built with a line of polyester vinyl 708D1 .0022 +/- 2% M/c 200V capacitors. It also has two lines of 8847C +m/c ss 47K +10VDC capacitors. The board has several small ceramic capacitors. Resistors are primarily ceramic-covered metal film, but some carbon composite resistors may be found on the board.

Manufacturer information

General Electric (GE) is a multinational conglomerate founded in 1892, based in the United States. It operates in various industries, including aviation, healthcare, renewable energy, and power. GE is known for its innovations in technology, manufacturing, and infrastructure solutions.

IQElectro 2 Year Warranty

IQElectro offers a 2-Year Warranty on all our products. This complimentary two-year warranty ensures that every purchase from IQElectro is a secure investment in the future of your company.
Warranty Terms and Conditions

IQElectro is not an authorized distributor.

IQElectro LLC (IQElectro) is NOT an Authorized Distributor or in any way affiliated with Rockwell Automation, Siemens, or any other Manufacturers. IQElectro is NOT an Authorized Dealer of this product. The product may be of older version, date codes, or design than that available from authorized dealers. As IQElectro is not an authorized dealer of this product, the Original Manufacturer's Warranty and Support DO NOT apply. IQElectro sells SURPLUS only and DOES NOT SELL SOFTWARE or FIRMWARE licenses. Some hardware products may contain software and firmware and may not be legally operated without first obtaining an appropriate license from the manufacturer. IQElectro makes no representation as to whether a product will or will not have software or firmware and, if it does, whether the software or firmware is the revision level that you need for your application. IQElectro also makes no representations as to your ability or right to download or otherwise obtain software or firmware for the product from the Original Manufacturer, its distributors, or any other source. IQElectro also makes no representations as to your right to install any such software or firmware on the product. IQElectro will not obtain or supply software or firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing software or firmware. Customer acknowledges and agrees that IQElectro DOES NOT provide any software, firmware, operating system, or right-to-use licenses with the products it sells. Customers understand and agree that proper software (firmware) licensing, maintenance, and upgrades are subject to the applicable manufacturer's Licensing Agreement or similar document. Disclaimer Policy.