DS4815COMD | General Electric Printed Circuit Board

Description 

The DS4815COMD is a modified PCB component for GE’s Mark IV gas and steam turbine control system. The MKIV is designed to protect the turbine system around the clock from issues like fire, high pressure, vibration, and over temperature and over speed. The MKIV has significantly improved reliability when compared to earlier Speedtronic systems like the MKI and MKII.

Technical Specifications 

Information About DS4815COMD

The DS4815COMD is a modification built upon a DS3800HCMC PCB. The board is drilled at all corners and marked for alignment on one edge. It is marked with the code 6BA00. Extractor clips have been inserted into two corners.

The DS4815COMD has three mating connectors designed for communication between PCBs. This includes one 2184553-1 AMP 533002-1 connector (on the left side of the board,) and two AMP 8751C 745105-2 connectors. These latter connectors have screw connectors located on either side of the pins.

The DS4815COMD has three light emitting diodes, including one amber and two red. The board has two TP test points, two Augat connectors, three resistor network arrays, and eighteen jumper switches.

The DS4815COMD has over fifty circuits. This includes quad 2-input NOR gates, dual J-K negative-edge-triggered flip-flops with preset and clear that are fully buffered with maximum isolation from external disturbance, hex/quad d-type flip-flops with an individual data input to each flip-flop, and quad 2-input positive NAND gates that can accept 3.3-V or 2.5-V logic inputs.

Manufacturer information

General Electric (GE) is a multinational conglomerate founded in 1892, based in the United States. It operates in various industries, including aviation, healthcare, renewable energy, and power. GE is known for its innovations in technology, manufacturing, and infrastructure solutions.

IQElectro 2 Year Warranty

IQElectro offers a 2-Year Warranty on all our products. This complimentary two-year warranty ensures that every purchase from IQElectro is a secure investment in the future of your company.
Warranty Terms and Conditions

IQElectro is not an authorized distributor.

IQElectro LLC (IQElectro) is NOT an Authorized Distributor or in any way affiliated with Rockwell Automation, Siemens, or any other Manufacturers. IQElectro is NOT an Authorized Dealer of this product. The product may be of older version, date codes, or design than that available from authorized dealers. As IQElectro is not an authorized dealer of this product, the Original Manufacturer's Warranty and Support DO NOT apply. IQElectro sells SURPLUS only and DOES NOT SELL SOFTWARE or FIRMWARE licenses. Some hardware products may contain software and firmware and may not be legally operated without first obtaining an appropriate license from the manufacturer. IQElectro makes no representation as to whether a product will or will not have software or firmware and, if it does, whether the software or firmware is the revision level that you need for your application. IQElectro also makes no representations as to your ability or right to download or otherwise obtain software or firmware for the product from the Original Manufacturer, its distributors, or any other source. IQElectro also makes no representations as to your right to install any such software or firmware on the product. IQElectro will not obtain or supply software or firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing software or firmware. Customer acknowledges and agrees that IQElectro DOES NOT provide any software, firmware, operating system, or right-to-use licenses with the products it sells. Customers understand and agree that proper software (firmware) licensing, maintenance, and upgrades are subject to the applicable manufacturer's Licensing Agreement or similar document. Disclaimer Policy.