.svg?v=180920048278408794651730423543){kind=small}
EL6002 | BECKHOFF EtherCAT Terminal, 2-channel communication interface, serial, RS232, D-sub
- Regular price
- $334.00
- Sale price
- $334.00
- Regular price
-
Couldn't load pickup availability
Do you need help?
Product Description P/N: EL6002
Description
EL6002 is an EL6xxx series terminal manufactured by Beckhoff. This terminal weighs approx. 55 g, and operates at a temperature range of -25 to +60 degrees Celsius with data transfer rates of 9600 baud.
Technical Specifications
| Manufacturer | BECKHOFF |
| Category | PLCs/Machine Control |
| Subcategory | PLC Programming Terminal |
| Part Number | EL6002 |
| Connection technology | D-sub, 9-pin |
| Data transfer channels | 2 |
| Data transfer rates | 300…115,200 baud; default: 9600 baud, 8 data bits, no parity and one stop bit |
| Interfaces | 2 x RS232 |
| Cable length | max. 15 m |
| Power supply | via the E-bus |
| Electrical isolation | 500 V (E-bus/signal voltage) |
| Data buffer | 864 bytes receive buffer, 128 bytes transmit buffer |
| Configuration | no address setting, configuration via the controller |
| Current consumption E-bus | typ. 170 mA |
| Operating/storage temperature | -25…+60 °C/-40…+85 °C |
| Relative humidity | 95%, no condensation |
| Vibration/shock resistance | conforms to EN 60068-2-6/EN 60068-2-27 |
| Protect. rating/installation pos. | IP20/variable |
Information About EL6002
The EL6002 serial interface enables the connection of devices with two RS232 interfaces. The devices connected to the EL6002 EtherCAT Terminal communicate with the automation device via the Coupler. The active communication channel operates independently of the higher-level EtherCAT system in full duplex mode with 300 baud up to 115.2 kbaud. The RS232 interfaces guarantee high interference immunity through electrically isolated signals.
In conjunction with the TwinCAT Virtual Serial COM Driver, the EL6002 can be used as a normal Windows COM interface.
The EL6002 is an EtherCAT terminal that represents both high utility and cost-effectiveness. It can operate in diverse environments in temperature ranges between -25 and +60 degrees Celsius (storage temperature needs to fall between -40 and +85 degrees Celsius). Power is supplied via E-bus for its operation and the terminal weighs approximately 55 g. In addition to having high immunity to EMC, the system has a high shock and vibration resistance. The vibration resistance standard conforms to international standards that are used to gauge a system’s sensitivity to shock and vibration.
The terminal uses a D-sub technology and has absolutely no line impedance. The system’s design also protects it against penetration of solid objects up to 12 mm. In order to make the configuration process easy, no address setting is required at the beginning. The EL6002’s E-Bus consumes only 170 mA current. If you want to use the Virtual Serial COM Driver, then a license is available as an additional feature. By using the EL6002, the user can connect devices with up to two RS232 interfaces. Overall, the EL6002 proves to be a feature-laden platform that can be used in conjunction with a variety of interfaces.
Manufacturer information
Beckhoff Automation is a German manufacturer of open automation systems, including industrial PCs, I/O and fieldbus components, drive technology, automation software, and hardware for machine vision. Beckhoff is known for its innovative and reliable automation technology, which is used in a wide range of industries. The company is committed to providing customers with the best possible automation solutions to help them succeed in their businesses.
Description
EL6002 is an EL6xxx series terminal manufactured by Beckhoff. This terminal weighs approx. 55 g, and operates at a temperature range of -25 to +60 degrees Celsius with data transfer rates of 9600 baud.
Technical Specifications
| Manufacturer | BECKHOFF |
| Category | PLCs/Machine Control |
| Subcategory | PLC Programming Terminal |
| Part Number | EL6002 |
| Connection technology | D-sub, 9-pin |
| Data transfer channels | 2 |
| Data transfer rates | 300…115,200 baud; default: 9600 baud, 8 data bits, no parity and one stop bit |
| Interfaces | 2 x RS232 |
| Cable length | max. 15 m |
| Power supply | via the E-bus |
| Electrical isolation | 500 V (E-bus/signal voltage) |
| Data buffer | 864 bytes receive buffer, 128 bytes transmit buffer |
| Configuration | no address setting, configuration via the controller |
| Current consumption E-bus | typ. 170 mA |
| Operating/storage temperature | -25…+60 °C/-40…+85 °C |
| Relative humidity | 95%, no condensation |
| Vibration/shock resistance | conforms to EN 60068-2-6/EN 60068-2-27 |
| Protect. rating/installation pos. | IP20/variable |
Information About EL6002
The EL6002 serial interface enables the connection of devices with two RS232 interfaces. The devices connected to the EL6002 EtherCAT Terminal communicate with the automation device via the Coupler. The active communication channel operates independently of the higher-level EtherCAT system in full duplex mode with 300 baud up to 115.2 kbaud. The RS232 interfaces guarantee high interference immunity through electrically isolated signals.
In conjunction with the TwinCAT Virtual Serial COM Driver, the EL6002 can be used as a normal Windows COM interface.
The EL6002 is an EtherCAT terminal that represents both high utility and cost-effectiveness. It can operate in diverse environments in temperature ranges between -25 and +60 degrees Celsius (storage temperature needs to fall between -40 and +85 degrees Celsius). Power is supplied via E-bus for its operation and the terminal weighs approximately 55 g. In addition to having high immunity to EMC, the system has a high shock and vibration resistance. The vibration resistance standard conforms to international standards that are used to gauge a system’s sensitivity to shock and vibration.
The terminal uses a D-sub technology and has absolutely no line impedance. The system’s design also protects it against penetration of solid objects up to 12 mm. In order to make the configuration process easy, no address setting is required at the beginning. The EL6002’s E-Bus consumes only 170 mA current. If you want to use the Virtual Serial COM Driver, then a license is available as an additional feature. By using the EL6002, the user can connect devices with up to two RS232 interfaces. Overall, the EL6002 proves to be a feature-laden platform that can be used in conjunction with a variety of interfaces.
Manufacturer information
Beckhoff Automation is a German manufacturer of open automation systems, including industrial PCs, I/O and fieldbus components, drive technology, automation software, and hardware for machine vision. Beckhoff is known for its innovative and reliable automation technology, which is used in a wide range of industries. The company is committed to providing customers with the best possible automation solutions to help them succeed in their businesses.