Fireye EP160 Flame-Monitor Programmer Module 30-Second Purge 10/15-Second Ignition Non-Recycle

Description

The Fireye EP160 is an EP Series flame safeguard programmer module designed for automatic burner sequencing, ignition control, and flame supervision in commercial and industrial combustion systems. Fireye part number EP160 features a fixed 30-second pre-purge period, selectable 10- or 15-second trial-for-ignition timing, and non-recycle operation. Its electronic control functions support burner startup verification, safety interlock monitoring, and protective shutdown in compatible Fireye E100 and E110 Flame-Monitor systems.

Technical Specifications

Information About EP160

The EP160 is part of the Fireye EP100 Series of programmer modules, developed for use with E100 and E110 Flame-Monitor burner management controls. Its plug-in electronic construction incorporates a Check-Run switch, communication connectors, and internal memory for recording burner operating cycles, operating hours, and lockout history. The programmer coordinates high-fire purge verification, low-fire start positioning, fuel valve end-switch checks, and running interlock supervision during the burner operating sequence. Designed for non-recycle operation, the module requires appropriate safety reset procedures following a flame failure lockout and supports external diagnostic displays and Modbus communication through compatible system interfaces.

Key Features:

• 30-Second Pre-Purge: Provides a fixed purge interval before the burner ignition sequence.

• Selectable Ignition Trial: Supports 10- or 15-second trial-for-ignition timing according to burner requirements.

• Non-Recycle Operation: Prevents automatic restart following safety lockout conditions requiring manual reset.

• E100/E110 Compatibility: Designed for Fireye Flame-Monitor control systems using compatible EP programmer modules.

• High-Fire Purge Verification: Supervises the high-fire purge interlock before progressing through the startup sequence.

• Low-Fire Start Verification: Confirms the required low-fire position before ignition.

• Running Interlock Monitoring: Supervises connected limit, airflow, and fuel pressure switches during burner operation.

• Fuel Valve Safety Checks: Supports fuel valve end-switch verification as part of the burner safety sequence.

• Flame Failure Protection: De-energizes fuel valve circuits within four seconds maximum following flame failure.

• Check-Run Switch: Allows the operating sequence to be held at designated stages for burner setup and testing.

• Diagnostic Memory: Records burner cycles, operating hours, and safety lockout history.

• Communication Interfaces: Includes an RJ45 connector for the ED510 display and RJ12 connections for Modbus communication.

The EP160 delivers the reliability and precision required for industrial burner ignition sequencing, flame supervision, safety interlock verification, and combustion equipment protection.

Get fast quote and compatibility check

Compatibility check available   ·   Alternative parts suggested

Send Request

Get a response to your request within 5 minutes

Talk to a real industrial automation specialist.
We verify compatibility, suggest alternatives, and provide fast quotes.

Something went wrong, please try again

Arty A.

Senior Sales Manager

Daniel S.

Parts Specialist

Request successfully sent!

Estimated response time: 1 to 5 minutes.