IC200ALG266 | GE FANUC 15-Point Analog current input module VersaMax I/O series

Description 

The IC200ALG266 is a 15-Point Analog current input module from VersaMax I/O series formerly produced by GE Intelligent Platforms, now under Emerson Automation. This module has Fifteen (15) single-ended input channels that accept -10 to +10 VDC input signals with resolution of 15 bits and maximum update rate of 7.5 ms. This module has a maximum backplane current draw of 150 mA.

Technical Specifications 

Information About IC200ALG266

The IC200ALG266 is a VersaMax analog input module. This module is mainly used in distributed I/O architecture and utilized to interface analog measuring instruments and feedback devices that generate signal voltage range of 10 VDC to + 10 VDC. This input module comes with an analog to digital signal conversion resolution of 15-bits or 0.3125mV per count.

The IC200ALG266 is powered by the backplane power supply with current draw of 150 mA, maximum. It does not require an external power supply to activate each input channels as the embedded Fifteen (15) analog input channels support sink wiring configuration. This module has accuracy of +/-0.3% typical of full scale, +/-0.5% maximum of full scale at operating temperature of 25 Degrees Celsius and +/-1% maximum of full scale at 60 Degrees Celsius.

The individual channels of the IC200ALG266 is capable of detecting failure in the conversion of the analog signal. This happens when the AD converter delivers an output that is greater than 6% of the full-scale value. This error is reported to the CPU which can be represented to partner Human Machine Interface (HMI) and Supervisory Control and Data Acquisition (SCADA) systems as Fault or Bad signal quality.

The IC200ALG266 has software configurable input state in reaction to CPU stop or module error. These options include default or last state operation which is applicable in implementing safe start-up especially in the event of power interruptions. Each input channels has filter response of 32 Hz +/-20% with channel update rate of 7.5 ms.

The GE Fanuc Automation IC200ALG266 module is a certified Versamax input module that has been manufactured by GE Fanuc Automation. This module has been designed to provide an interface to different input devices. This interface is achieved through connections to the 15 input channels that are included in the module. These inputs are analog and the module comes with an LED that indicates when the drive has been properly configured and able to operate and this LED is the OK LED. The GE Fanuc Automation IC200ALG266 Versamax input module comes with protective features that ensure safe operations and help to extend the life of both the module and the inputs. These protective features protect the module from overvoltage levels higher than 30 Volts DC. The operations of each input are individual operations, meaning that if one of them is in a fault state, it will not affect the functioning of the rest of the inputs.

The GE Fanuc Automation IC200ALG266 Versamax input module operates with a backplane current consumption rating of 50 milliamps to 100 milliamps. It does not operate with an external power supply. The IC200ALG266 Versamax input module has a resolution of 15 bits, although if it exposed to radiofrequency interference, it might need to be derated by up to +/-2%. The module comes filtered with channel update rate of 7.5 milliseconds. The input current range of the module goes from -10 VD to + 10 VDC.

Manufacturer information

GE FANUC, now part of Emerson Automation Solutions, was a leading provider of industrial automation and control systems. Known for innovative solutions, GE FANUC played a key role in advancing manufacturing, offering a range of products including PLCs, CNCs, and HMI solutions.

IQElectro 2 Year Warranty

IQElectro offers a 2-Year Warranty on all our products. This complimentary two-year warranty ensures that every purchase from IQElectro is a secure investment in the future of your company.
Warranty Terms and Conditions

IQElectro is not an authorized distributor.

IQElectro LLC (IQElectro) is NOT an Authorized Distributor or in any way affiliated with Rockwell Automation, Siemens, or any other Manufacturers. IQElectro is NOT an Authorized Dealer of this product. The product may be of older version, date codes, or design than that available from authorized dealers. As IQElectro is not an authorized dealer of this product, the Original Manufacturer's Warranty and Support DO NOT apply. IQElectro sells SURPLUS only and DOES NOT SELL SOFTWARE or FIRMWARE licenses. Some hardware products may contain software and firmware and may not be legally operated without first obtaining an appropriate license from the manufacturer. IQElectro makes no representation as to whether a product will or will not have software or firmware and, if it does, whether the software or firmware is the revision level that you need for your application. IQElectro also makes no representations as to your ability or right to download or otherwise obtain software or firmware for the product from the Original Manufacturer, its distributors, or any other source. IQElectro also makes no representations as to your right to install any such software or firmware on the product. IQElectro will not obtain or supply software or firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing software or firmware. Customer acknowledges and agrees that IQElectro DOES NOT provide any software, firmware, operating system, or right-to-use licenses with the products it sells. Customers understand and agree that proper software (firmware) licensing, maintenance, and upgrades are subject to the applicable manufacturer's Licensing Agreement or similar document. Disclaimer Policy.