IC800VMCE030 | General Electric VersaMotion Cable
- Regular price
- $114.00
- Sale price
- $114.00
- Regular price
-
Do you need more quantity?
Product Description P/N: IC800VMCE030
Description
The GE Fanuc IC800VMCE030 is an Encoder Cable designed for use with the GE VersaMotion servo motor control system. It facilitates the feedback connection between servo motors and servo drive units, transmitting the angular position signal generated by the encoder to the servo drive. The cable features secure device connections at both ends: a connector AMP 1-172169-9 (Mate and Lock type) at the motor end and a twenty-terminal connector with locking screws at the servo drive end. Additionally, it utilizes a twisted-shield signal wire with a terminal that should be connected to the ground terminal at the front of the servo drive unit to minimize signal interference. To prevent electric shock from residual voltage within the system, refrain from touching any terminal or cable connected to the servo drive unit after powering off, waiting until all LED indicators are off.
Technical Specifications
Part # |
IC800VMCE030 |
Category |
Servo Products |
Subcategory |
Servo Cable and Accessory |
Purpose |
Provides a feedback connection between servo motors and servo drive units |
Connector (Motor End) |
AMP 1-172169-9 (Mate and Lock type) |
Connector (Servo Drive End) |
Twenty (20x) terminal connector with locking screws |
Signal Wire |
Twisted-shield signal wire with a terminal |
Grounding |
Terminal connected to the ground terminal (marked) at the front of the servo drive unit |
Installation |
Place the encoder cable in separated conduits from power cables, with a separation of at least 25 cm (12 inches) to avoid signal interference |
Safety Precaution |
Do not touch any terminal or cable connected to the servo drive unit after power-off. Wait until all LED indicators are off to prevent electric shock from residual voltage. |
Information About IC800VMCE030
The GE Fanuc IC800VMCE030 is an Encoder Cable designed for use with the GE VersaMotion servo motor control system. Its primary function is to establish a feedback connection between servo motors and servo drive units, transmitting the angular position signal generated by the motor's encoder to the servo drive.
This cable features secure device connections at both ends. At the motor end, it is equipped with a Mate and Lock type connector, specifically the AMP 1-172169-9 model. Conversely, at the servo drive end (amplifier connection), it utilizes a twenty (20x) terminal connector fitted with locking screws.
In addition, the cable incorporates a twisted-shield signal wire with a terminal, intended for grounding purposes. This terminal should be linked to the designated ground terminal, clearly marked at the front of the servo drive unit.
During installation, it is imperative to separate the encoder cable from power cables by placing it in distinct conduits. A minimum separation distance of 25 cm (12 inches) is recommended to prevent signal interference and ensure optimal performance.
Manufacturer information
General Electric (GE) is a multinational conglomerate founded in 1892, based in the United States. It operates in various industries, including aviation, healthcare, renewable energy, and power. GE is known for its innovations in technology, manufacturing, and infrastructure solutions.
IQElectro 2 Year Warranty
IQElectro offers a 2-Year Warranty on all our products. This complimentary two-year warranty ensures that every purchase from IQElectro is a secure investment in the future of your company.Warranty Terms and Conditions
Description
The GE Fanuc IC800VMCE030 is an Encoder Cable designed for use with the GE VersaMotion servo motor control system. It facilitates the feedback connection between servo motors and servo drive units, transmitting the angular position signal generated by the encoder to the servo drive. The cable features secure device connections at both ends: a connector AMP 1-172169-9 (Mate and Lock type) at the motor end and a twenty-terminal connector with locking screws at the servo drive end. Additionally, it utilizes a twisted-shield signal wire with a terminal that should be connected to the ground terminal at the front of the servo drive unit to minimize signal interference. To prevent electric shock from residual voltage within the system, refrain from touching any terminal or cable connected to the servo drive unit after powering off, waiting until all LED indicators are off.
Technical Specifications
Part # |
IC800VMCE030 |
Category |
Servo Products |
Subcategory |
Servo Cable and Accessory |
Purpose |
Provides a feedback connection between servo motors and servo drive units |
Connector (Motor End) |
AMP 1-172169-9 (Mate and Lock type) |
Connector (Servo Drive End) |
Twenty (20x) terminal connector with locking screws |
Signal Wire |
Twisted-shield signal wire with a terminal |
Grounding |
Terminal connected to the ground terminal (marked) at the front of the servo drive unit |
Installation |
Place the encoder cable in separated conduits from power cables, with a separation of at least 25 cm (12 inches) to avoid signal interference |
Safety Precaution |
Do not touch any terminal or cable connected to the servo drive unit after power-off. Wait until all LED indicators are off to prevent electric shock from residual voltage. |
Information About IC800VMCE030
The GE Fanuc IC800VMCE030 is an Encoder Cable designed for use with the GE VersaMotion servo motor control system. Its primary function is to establish a feedback connection between servo motors and servo drive units, transmitting the angular position signal generated by the motor's encoder to the servo drive.
This cable features secure device connections at both ends. At the motor end, it is equipped with a Mate and Lock type connector, specifically the AMP 1-172169-9 model. Conversely, at the servo drive end (amplifier connection), it utilizes a twenty (20x) terminal connector fitted with locking screws.
In addition, the cable incorporates a twisted-shield signal wire with a terminal, intended for grounding purposes. This terminal should be linked to the designated ground terminal, clearly marked at the front of the servo drive unit.
During installation, it is imperative to separate the encoder cable from power cables by placing it in distinct conduits. A minimum separation distance of 25 cm (12 inches) is recommended to prevent signal interference and ensure optimal performance.
Manufacturer information
General Electric (GE) is a multinational conglomerate founded in 1892, based in the United States. It operates in various industries, including aviation, healthcare, renewable energy, and power. GE is known for its innovations in technology, manufacturing, and infrastructure solutions.