IFM Electronic OID250 Laser Photoelectric Distance Sensor 0.03–2m Class 1 PNP IO-Link IP67
- Regular price
- $399.00
- Sale price
- $399.00
- Regular price
-
Couldn't load pickup availability
Product Description P/N: OID250
Description
The IFM Electronic OID250 is an industrial photoelectric distance sensor designed for non-contact object detection and position monitoring over a measuring range of 0.03 to 2 meters. Featuring a Class 1 red laser, two complementary PNP switching outputs, and a 33 Hz sampling rate, it provides distance-dependent detection for automated machinery and material handling systems. Its stainless steel housing, IO-Link communication, and background suppression capability support reliable operation in demanding industrial environments.
Technical Specifications
|
Condition |
New/Never Used Surplus |
|
Brand |
IFM Electronic |
|
Category |
Industrial Sensors & Detection |
|
Part Number |
OID250 |
|
Subcategory |
Photoelectric Distance Sensors |
|
Product Series |
OID Series |
|
Product Type |
Laser Photoelectric Distance Sensor |
|
Measurement Principle |
Optical Time-of-Flight |
|
Detection System |
Background Suppression |
|
Measuring Range |
0.03–2 m (30–2,000 mm) |
|
Background Suppression Range |
Less Than 20 m |
|
Light Source |
Visible Red Laser |
|
Laser Wavelength |
650 nm |
|
Laser Protection Class |
Class 1 |
|
Typical Laser Lifetime |
50,000 Hours |
|
Maximum Light Spot Diameter |
5 mm at 2 m |
|
Sampling Rate |
33 Hz |
|
Detection Range Hysteresis |
Less Than 4% (Black Target, 6% Remission) |
|
Operating Voltage |
10–30 VDC |
|
Current Consumption |
75 mA at 24 VDC |
|
Digital Outputs |
2 PNP Switching Outputs |
|
Output Configuration |
Complementary Normally Open / Normally Closed |
|
Maximum Output Current |
100 mA per Output |
|
Switching Frequency |
11 Hz |
|
Communication Interface |
IO-Link 1.1 |
|
IO-Link Transmission Rate |
COM2, 38.4 kBaud |
|
IO-Link Standard |
IEC 61131-9 |
|
IO-Link Profile |
Smart Sensor |
|
Minimum IO-Link Cycle Time |
6.6 ms |
|
IO-Link Device ID |
373 |
|
SIO Mode |
Supported |
|
Process Data |
1 Analog Value and 1 Binary Value |
|
Configuration Method |
Integrated Pushbutton / IO-Link |
|
Electrical Connection |
M12 Quick-Disconnect Connector |
|
Housing Material |
Stainless Steel |
|
Ambient Operating Temperature |
-25°C to +60°C |
|
Low-Temperature Operation |
Warm-Up Required Below -10°C; Laser Disabled During Warm-Up |
|
Protection Rating |
IP65 / IP67 |
|
Protection Class |
Class III |
|
Maximum Ambient Light Immunity |
10 klx at Target |
|
EMC Standard |
EN 60947-5-2 |
|
Electrical Protection |
Reverse Polarity, Non-Latching Short Circuit, Overload |
|
Power Supply Requirement |
Class 2 Source Required for cULus Applications |
|
Weight |
Approximately 0.35 lb |
Information About OID250
The OID250 is an IFM Electronic OID Series laser distance sensor developed for industrial object detection and positioning applications. Its robust stainless steel housing incorporates a 650 nm red laser, optical time-of-flight measurement technology, and an electronic switching system with two complementary PNP outputs. The sensor is designed for integration with industrial controllers, conveyor equipment, and automated handling systems requiring non-contact distance measurement and background suppression. Its IO-Link 1.1 interface, pushbutton adjustment, and IP65/IP67 protection enable configurable operation and diagnostic communication in industrial environments.
Key Features:
-
Laser Distance Measurement: Measures object distances from 0.03 to 2 m using non-contact optical sensing technology.
-
Class 1 Laser: Uses a 650 nm red laser classified as Class 1 under applicable laser safety standards.
-
Background Suppression: Reduces unwanted detection of objects beyond the configured switching distance.
-
Dual PNP Switching Outputs: Provides two complementary digital outputs for industrial control applications.
-
IO-Link Communication: Supports digital distance data transmission, sensor identification, and diagnostic functions.
-
Fast Sampling Rate: Operates at 33 Hz for continuous distance monitoring in automated equipment.
-
Compact Laser Spot: Produces a maximum light spot diameter of 5 mm at a distance of 2 m.
-
Pushbutton Configuration: Enables local adjustment of sensing and switching parameters.
-
Stainless Steel Housing: Provides mechanical durability for installation in industrial machinery.
-
Wide DC Operating Range: Operates from 10 to 30 VDC with approximately 75 mA current consumption at 24 VDC.
-
IP65/IP67 Protection: Offers protection against dust, water jets, and temporary immersion.
-
Electrical Protection: Includes reverse-polarity, non-latching short-circuit, and overload protection.
The OID250 delivers the reliability and precision required for industrial object detection, automated positioning, conveyor monitoring, and distance-dependent switching applications.
Description
The IFM Electronic OID250 is an industrial photoelectric distance sensor designed for non-contact object detection and position monitoring over a measuring range of 0.03 to 2 meters. Featuring a Class 1 red laser, two complementary PNP switching outputs, and a 33 Hz sampling rate, it provides distance-dependent detection for automated machinery and material handling systems. Its stainless steel housing, IO-Link communication, and background suppression capability support reliable operation in demanding industrial environments.
Technical Specifications
|
Condition |
New/Never Used Surplus |
|
Brand |
IFM Electronic |
|
Category |
Industrial Sensors & Detection |
|
Part Number |
OID250 |
|
Subcategory |
Photoelectric Distance Sensors |
|
Product Series |
OID Series |
|
Product Type |
Laser Photoelectric Distance Sensor |
|
Measurement Principle |
Optical Time-of-Flight |
|
Detection System |
Background Suppression |
|
Measuring Range |
0.03–2 m (30–2,000 mm) |
|
Background Suppression Range |
Less Than 20 m |
|
Light Source |
Visible Red Laser |
|
Laser Wavelength |
650 nm |
|
Laser Protection Class |
Class 1 |
|
Typical Laser Lifetime |
50,000 Hours |
|
Maximum Light Spot Diameter |
5 mm at 2 m |
|
Sampling Rate |
33 Hz |
|
Detection Range Hysteresis |
Less Than 4% (Black Target, 6% Remission) |
|
Operating Voltage |
10–30 VDC |
|
Current Consumption |
75 mA at 24 VDC |
|
Digital Outputs |
2 PNP Switching Outputs |
|
Output Configuration |
Complementary Normally Open / Normally Closed |
|
Maximum Output Current |
100 mA per Output |
|
Switching Frequency |
11 Hz |
|
Communication Interface |
IO-Link 1.1 |
|
IO-Link Transmission Rate |
COM2, 38.4 kBaud |
|
IO-Link Standard |
IEC 61131-9 |
|
IO-Link Profile |
Smart Sensor |
|
Minimum IO-Link Cycle Time |
6.6 ms |
|
IO-Link Device ID |
373 |
|
SIO Mode |
Supported |
|
Process Data |
1 Analog Value and 1 Binary Value |
|
Configuration Method |
Integrated Pushbutton / IO-Link |
|
Electrical Connection |
M12 Quick-Disconnect Connector |
|
Housing Material |
Stainless Steel |
|
Ambient Operating Temperature |
-25°C to +60°C |
|
Low-Temperature Operation |
Warm-Up Required Below -10°C; Laser Disabled During Warm-Up |
|
Protection Rating |
IP65 / IP67 |
|
Protection Class |
Class III |
|
Maximum Ambient Light Immunity |
10 klx at Target |
|
EMC Standard |
EN 60947-5-2 |
|
Electrical Protection |
Reverse Polarity, Non-Latching Short Circuit, Overload |
|
Power Supply Requirement |
Class 2 Source Required for cULus Applications |
|
Weight |
Approximately 0.35 lb |
Information About OID250
The OID250 is an IFM Electronic OID Series laser distance sensor developed for industrial object detection and positioning applications. Its robust stainless steel housing incorporates a 650 nm red laser, optical time-of-flight measurement technology, and an electronic switching system with two complementary PNP outputs. The sensor is designed for integration with industrial controllers, conveyor equipment, and automated handling systems requiring non-contact distance measurement and background suppression. Its IO-Link 1.1 interface, pushbutton adjustment, and IP65/IP67 protection enable configurable operation and diagnostic communication in industrial environments.
Key Features:
-
Laser Distance Measurement: Measures object distances from 0.03 to 2 m using non-contact optical sensing technology.
-
Class 1 Laser: Uses a 650 nm red laser classified as Class 1 under applicable laser safety standards.
-
Background Suppression: Reduces unwanted detection of objects beyond the configured switching distance.
-
Dual PNP Switching Outputs: Provides two complementary digital outputs for industrial control applications.
-
IO-Link Communication: Supports digital distance data transmission, sensor identification, and diagnostic functions.
-
Fast Sampling Rate: Operates at 33 Hz for continuous distance monitoring in automated equipment.
-
Compact Laser Spot: Produces a maximum light spot diameter of 5 mm at a distance of 2 m.
-
Pushbutton Configuration: Enables local adjustment of sensing and switching parameters.
-
Stainless Steel Housing: Provides mechanical durability for installation in industrial machinery.
-
Wide DC Operating Range: Operates from 10 to 30 VDC with approximately 75 mA current consumption at 24 VDC.
-
IP65/IP67 Protection: Offers protection against dust, water jets, and temporary immersion.
-
Electrical Protection: Includes reverse-polarity, non-latching short-circuit, and overload protection.
The OID250 delivers the reliability and precision required for industrial object detection, automated positioning, conveyor monitoring, and distance-dependent switching applications.