Johnson Controls M9108-AGC-2 Non-Spring-Return Electric Actuator with Floating Control and Auxiliary Switches
- Regular price
- $385.00
- Sale price
- $385.00
- Regular price
-
Couldn't load pickup availability
Product Description P/N: M9108-AGC-2
Description
The Johnson Controls M9108-AGC-2 is a non-spring-return electric actuator for positioning HVAC dampers and compatible valve assemblies. It provides 70 lb-in of torque with on/off or floating control, while two auxiliary switches support position-dependent switching.
Technical Specifications
| Condition | New/Never Used Surplus |
| Brand | Johnson Controls |
| Category | HVAC Controls |
| Part Number | M9108-AGC-2 |
| Subcategory | Electric Actuators |
| Series | M9108 |
| Return Type | Non-spring return |
| Control Modes | Two-position on/off; floating three-point |
| Nominal Supply Voltage | 24 VAC, 50/60 Hz, or 24 VDC |
| Supply Range | 20–30 VAC; 24 VDC ±10% |
| Running Torque | 70 lb-in (8 N·m) |
| Travel Time | 25–50 seconds depending on load; 30 seconds at 50% rated load |
| Rotation Range | Adjustable 0°–90° in 5° increments; mechanically limited to 93° |
| Auxiliary Switches | Two SPDT |
| Electrical Connection | Screw terminals |
| Mounting | Direct coupled |
| Shaft Compatibility | Round: 3/8–3/4 inch; square: 3/8–5/8 inch |
| Enclosure Rating | NEMA 2 / IP42 |
| Operating Temperature | −20°C to +50°C |
| Weight | 2.9 lb (1.3 kg) |
Information About M9108-AGC-2
The M9108-AGC-2 is part of the Johnson Controls M9108 series of direct-coupled actuators. Its shaft clamp connects directly to supported round or square damper shafts. A 24 VAC or 24 VDC supply powers the motor, with rotation direction determined by the control wiring. A manual gear-release mechanism allows repositioning during setup, and screw terminals provide field wiring connections.
Key Features:
- Selectable Control: Supports two-position on/off and floating three-point operation.
- Rated Torque: Delivers 70 lb-in (8 N·m) for damper and compatible valve positioning.
- Direct Coupling: Mounts directly onto supported shafts without a separate damper linkage.
- Auxiliary Switches: Includes two SPDT switches for position indication or control functions.
- Adjustable Travel: Rotation can be limited from 0° to 90° in 5° increments.
- Manual Repositioning: Gear release disengages the drive for manual shaft adjustment.
- Stall Detection: Electronic circuitry deactivates the motor when a stall is detected.
- Protected Housing: Enclosure meets NEMA 2 and IP42 ratings.
The M9108-AGC-2 delivers the reliability and precision required for damper positioning and compatible valve control in HVAC systems.
Description
The Johnson Controls M9108-AGC-2 is a non-spring-return electric actuator for positioning HVAC dampers and compatible valve assemblies. It provides 70 lb-in of torque with on/off or floating control, while two auxiliary switches support position-dependent switching.
Technical Specifications
| Condition | New/Never Used Surplus |
| Brand | Johnson Controls |
| Category | HVAC Controls |
| Part Number | M9108-AGC-2 |
| Subcategory | Electric Actuators |
| Series | M9108 |
| Return Type | Non-spring return |
| Control Modes | Two-position on/off; floating three-point |
| Nominal Supply Voltage | 24 VAC, 50/60 Hz, or 24 VDC |
| Supply Range | 20–30 VAC; 24 VDC ±10% |
| Running Torque | 70 lb-in (8 N·m) |
| Travel Time | 25–50 seconds depending on load; 30 seconds at 50% rated load |
| Rotation Range | Adjustable 0°–90° in 5° increments; mechanically limited to 93° |
| Auxiliary Switches | Two SPDT |
| Electrical Connection | Screw terminals |
| Mounting | Direct coupled |
| Shaft Compatibility | Round: 3/8–3/4 inch; square: 3/8–5/8 inch |
| Enclosure Rating | NEMA 2 / IP42 |
| Operating Temperature | −20°C to +50°C |
| Weight | 2.9 lb (1.3 kg) |
Information About M9108-AGC-2
The M9108-AGC-2 is part of the Johnson Controls M9108 series of direct-coupled actuators. Its shaft clamp connects directly to supported round or square damper shafts. A 24 VAC or 24 VDC supply powers the motor, with rotation direction determined by the control wiring. A manual gear-release mechanism allows repositioning during setup, and screw terminals provide field wiring connections.
Key Features:
- Selectable Control: Supports two-position on/off and floating three-point operation.
- Rated Torque: Delivers 70 lb-in (8 N·m) for damper and compatible valve positioning.
- Direct Coupling: Mounts directly onto supported shafts without a separate damper linkage.
- Auxiliary Switches: Includes two SPDT switches for position indication or control functions.
- Adjustable Travel: Rotation can be limited from 0° to 90° in 5° increments.
- Manual Repositioning: Gear release disengages the drive for manual shaft adjustment.
- Stall Detection: Electronic circuitry deactivates the motor when a stall is detected.
- Protected Housing: Enclosure meets NEMA 2 and IP42 ratings.
The M9108-AGC-2 delivers the reliability and precision required for damper positioning and compatible valve control in HVAC systems.