MPL-B330P-MJ72AA | Allen-Bradley Brushless Servo Motor, 460V, 5000RPM

Description 

The Allen-Bradley MPL-B330P-MJ72AA is a Servo Motor that is part of the Kinetix MP Low-Inertia series. This servo motor belongs to the 400V voltage class, Frame size 3, 76.2 mm (3.0 in.) magnet stack rated speed of 5000 rpm with Circular (SpeedTec) DIN connector, right angle, 180° rotatable. It uses a 1024 sin/cos, absolute multi-turn encoder (Hiperface protocol) as position feedback.

Technical Specifications 

Information About MPL-B330P-MJ72AA

The Allen-Bradley MPL-B330P-MJ72AA is a Kinetix Servo motor that is part of the MP low inertia series. This servo motor belongs to the 400V voltage class, with 100 mm frame size and magnet stack length measuring 76.2 mm or 3.0 inches. It has a the same rated and maximum speed of 5000 revolutions per minute (rpm). For establishing power and feedback connections, this servo motor uses the Circular SpeedTec DIN connector in right angle orientation and rotatable up to 180°. This connection method allows fast and secured connection of signals to the motor with an increased suceptability to vibration. This servo motor is also equipped with a multi-turn absolute encoder with 1024 sin/cos resolution utilizing Hiperface protocol. Using this encoder, the motor’s position is monitored, providing an accurate position feedback.

The MPL-B330P-MJ72AA has an output power of 1.8 kW and continuous stall Torque rating of 4.18 N-m. For installation, it is provided with FF type mounting holes and comes with a shaft with key design however, this servo motor has no shaft seal installed. An Allen-Bradley shaft seal is recommended with catalog number MPL-SSN-A4B4. This shaft seal must be serviced within 3-12 month period range as shaft seals are prone to wear and tear. Shaft seals also increase the environmental rating of the servo motor from IP55 to IP65. Sjaft seals are made of nitrile along a wear and tear reducing lubricant.

The MPL-B330P-MJ72AA servo motor may be installed in most processes however, not ideal for application in the food and beverage industry.

When the Allen-Bradley MPL-B330P-MJ72AA motor is installed, it needs to be grounded before initiating operations. This will help the motor to send and receive clearer signals without being affected by electrical noise. Besides grounding the motor, it is recommended to use filters on all its connections as well as keeping the power and signal cables separated. The MPL-B330P-MJ72AA servo motor can operate easily in non-corrosive environments that have temperatures that do not surpass the 40 degrees Celsius. This maximum temperature supported by the motor vary depending on the shields and housings are installed. In order to avoid overheating, the users need to make sure that the drive has proper air inlets and that it is releasing heat properly.

Manufacturer information

Allen‑Bradley components, integrated control and information solutions are built for demanding industrial applications. We integrate control and information across the enterprise to make you as productive as possible.

IQElectro 2 Year Warranty

IQElectro offers a 2-Year Warranty on all our products. This complimentary two-year warranty ensures that every purchase from IQElectro is a secure investment in the future of your company.
Warranty Terms and Conditions

IQElectro is not an authorized distributor.

IQElectro LLC (IQElectro) is NOT an Authorized Distributor or in any way affiliated with Rockwell Automation, Siemens, or any other Manufacturers. IQElectro is NOT an Authorized Dealer of this product. The product may be of older version, date codes, or design than that available from authorized dealers. As IQElectro is not an authorized dealer of this product, the Original Manufacturer's Warranty and Support DO NOT apply. IQElectro sells SURPLUS only and DOES NOT SELL SOFTWARE or FIRMWARE licenses. Some hardware products may contain software and firmware and may not be legally operated without first obtaining an appropriate license from the manufacturer. IQElectro makes no representation as to whether a product will or will not have software or firmware and, if it does, whether the software or firmware is the revision level that you need for your application. IQElectro also makes no representations as to your ability or right to download or otherwise obtain software or firmware for the product from the Original Manufacturer, its distributors, or any other source. IQElectro also makes no representations as to your right to install any such software or firmware on the product. IQElectro will not obtain or supply software or firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing software or firmware. Customer acknowledges and agrees that IQElectro DOES NOT provide any software, firmware, operating system, or right-to-use licenses with the products it sells. Customers understand and agree that proper software (firmware) licensing, maintenance, and upgrades are subject to the applicable manufacturer's Licensing Agreement or similar document. Disclaimer Policy.