MVI69E-MBTCP | Allen-Bradley ProSoft Technology Modbus TCP/IP Enhanced Communication Module

Description 

The MVI69E-MBTCP is a Modbus TCP/IP Enhanced Communication Module. This module is developed by ProSoft Technology that is specifically compatible with CompactLogix controlelrs. This module is a single slot module, with I/O size of 60/120/240 - 16 bit integers with available data of 10,000 words. It has One (1) RJ45 communication port that supports 10/100 Base-T Ethernet data rate.

Technical Specifications 

Information About MVI69E-MBTCP

The MVI69E-MBTCP has power supply distance rating of 4. When used with CompactLogix 1769-L43 and 1769-L45, install the MVI69E-MBTCP on the first Two (2) slots of the 1769 bus. The MVI69E-MBTCP comes with One (1) RJ45 communication port that supports 10/100 Base-T Ethernet data rate. It also requires used of ProSoft Configuration Builder and ProSoft Discovery Service.

The MVI69E-MBTCP supports both Client and Server connectivity. It may be used to interface with a wide variety of MODBUS enabled devices. It has an I/O size of 60/120/240 - 16 bit integers with 10,000 Words of available data. It supports Floating point data movement as well as support for Enron, Daniel, and other Floating point data implementations. It supports MODBUS functions such as 1: Read Coil Status; 2: Read Input Status; 3: Read Holding Register; 4: Read Input Registers; 5: Force (Write) Single Coil; 6: Preset (Write) Single Holding Register; 8: Diagnostics (Slave Only, Responds to Sub function 00); 15: Force (Write) Multiple Coils;16: Preset (Write) Multiple Holding Registers; 17: Report Slave ID (Slave Only); 22: Mask Write Holding Register (Slave Only) and 23: Read/Write Holding registers (Slave only).

This module is shipped with the setup jumper OFF. The acts as an input and output communication module between the Modbus TCP/IP network. The MVI69E-MBTCP communicates with MODBUS compatible devices, acting also as a communication module between the bus network and the CompactLogix backplane. The cable recommended for Ethernet connection is a category 5 or higher. The recommended conditions for the optimum performance of the Prosoft Technologies MVI69E-MBTCP Modbus TCP/IP Enhanced Communication Module are an operating temperature of 0 to 60 degrees Celsius and a relative humidity of 5 to 95%. The Prosoft Technologies MVI69E-MBTCP Modbus TCP/IP Enhanced Communication Module provides LED indicator that shows the module status, the backplane activity, the Ethernet port activity and the configuration. This module needs to be installed on a rack, and after the installation, users need to check that the module is secured enough to avoid trouble integrating the module into the system.

Manufacturer information

Allen‑Bradley components, integrated control and information solutions are built for demanding industrial applications. We integrate control and information across the enterprise to make you as productive as possible.

IQElectro 2 Year Warranty

IQElectro offers a 2-Year Warranty on all our products. This complimentary two-year warranty ensures that every purchase from IQElectro is a secure investment in the future of your company.
Warranty Terms and Conditions

IQElectro is not an authorized distributor.

IQElectro LLC (IQElectro) is NOT an Authorized Distributor or in any way affiliated with Rockwell Automation, Siemens, or any other Manufacturers. IQElectro is NOT an Authorized Dealer of this product. The product may be of older version, date codes, or design than that available from authorized dealers. As IQElectro is not an authorized dealer of this product, the Original Manufacturer's Warranty and Support DO NOT apply. IQElectro sells SURPLUS only and DOES NOT SELL SOFTWARE or FIRMWARE licenses. Some hardware products may contain software and firmware and may not be legally operated without first obtaining an appropriate license from the manufacturer. IQElectro makes no representation as to whether a product will or will not have software or firmware and, if it does, whether the software or firmware is the revision level that you need for your application. IQElectro also makes no representations as to your ability or right to download or otherwise obtain software or firmware for the product from the Original Manufacturer, its distributors, or any other source. IQElectro also makes no representations as to your right to install any such software or firmware on the product. IQElectro will not obtain or supply software or firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing software or firmware. Customer acknowledges and agrees that IQElectro DOES NOT provide any software, firmware, operating system, or right-to-use licenses with the products it sells. Customers understand and agree that proper software (firmware) licensing, maintenance, and upgrades are subject to the applicable manufacturer's Licensing Agreement or similar document. Disclaimer Policy.