N-5630-2-H04AA | Allen-Bradley Servo Motor, 3.8 Nm/33.6 lb-in, 4000 rpm, NEMA 56, 230V, 2000 Line Count Optical Encoder, 24V dc Brake

Description 

The Allen-Bradley/Rockwell Automation N-5630-2-H04AA servo motor is a brushless servo motor with a high torque to size ratio and with a high energy ring magnet rotor. It is part of the Allen-Bradley N Series of servo motors in the Bulletin 1398 line of motors and drives. The N-5630-2-H04AA brushless servo motor comes with a 24 Volts DC holding brake. It has a voltage rating of 230 Volts AC and a continuous torque rating of 30 pounds on an inch. The N-5630-2-H04AA brushless servo motor’s typical applications include web processing, material handling, and robotics applications.

Technical Specifications 

Information About N-5630-2-H04AA

The Allen-Bradley N-5630-2-H04AA is an N-series servo motor. The motor has a standard encoder line count of 2000 and a standard flange. The N-5630-2-H04AA has an optional 24 Volts DC brake, a size 56 frame, and a motor winding of 230 Volts AC. Since the N-5630-2-H04AA, together with other servo motors, is meant to drive machinery, it must be controlled and not directly interfaced with power supplies. Servo motors, including the N-5630-2-H04AA, cannot be used with thyristor drives. The N-5630-2-H04AA has a 0.3 N-m per Krpm damping and a 1.3 N-m friction torque.

For the N-5630-2-H04AA, the feedback and power connectors are not on the motor but on the flying lead end. The inertia rating for the N-5630-2-H04AA is 9.044 Kg cm2 while the motor length is 199 millimeters. Servo motors in the N-5630 series, including the N-5630-2-H04AA, use the KPSE02E14-5P-A71 power connector which has 5 pins [3-phase (R, S, T), one grounded, and one open]. Additionally, the encoder used with the N-5630-2-H04AA has an operating voltage of 5 Volts DC and a supply current of 300 mA. The encoder is factory calibrated and it should not be calibrated by the users. As with other N-5630 servo motors, the N-5630-2-H04AA is compatible with the 0041-5071 shaft seal kit. The shaft seals should be lubricated to minimize wear. Connections to the N-5630-2-H04AA are made using straight or right-angled connectors which also provide environmental sealing. The 9101-1557 and the 9101-1698 motor power connectors also provide shield termination capabilities. Although the N-5630-2-H04AA has a maximum speed of 4000 Revolutions Per Minute, it has a lower load capacity than the N-5637-2-H00AA servo motor.

Manufacturer information

Allen-Bradley, a brand of Rockwell Automation, specializes in manufacturing industrial automation equipment. The product range includes programmable logic controllers (PLCs), motion control systems, safety devices, motor control equipment, automation software, and HMI panels. Allen-Bradley products are known for their reliability and integration with other systems.