National Instruments NI-9478 C Series Sinking Digital Output Module with Programmable Current Limits
- Regular price
- $1,505.00
- Sale price
- $1,505.00
- Regular price
-
Couldn't load pickup availability
Product Description P/N: NI-9478
Description
The National Instruments NI-9478 is a 16-channel C Series sinking digital output module for controlling compatible relays, solenoids, valves, and other industrial loads. It combines 50 µs update timing with programmable current limits, allowing protection settings to match the connected equipment.
Technical Specifications
| Condition | New/Never Used Surplus |
| Brand | National Instruments |
| Category | Industrial I/O |
| Part Number | NI-9478 |
| Subcategory | Digital Output Modules |
| Product Series | C Series |
| Digital Output Channels | 16 |
| Output Type | Sinking |
| Output Update Interval | 50 µs |
| External Supply Range | 0–50 VDC |
| Continuous Current per Channel | All 16 channels on: 1.2 A maximum; four on: 2.5 A maximum; one on: 5 A maximum |
| Switched Current per Channel at 10 kHz | All 16 channels on: 1 A maximum; four on: 2 A maximum; one on: 4 A maximum |
| Switched Current per Channel at 20 kHz | All 16 channels on: 0.75 A maximum; four on: 1.67 A maximum; one on: 3.33 A maximum |
| Output Impedance | 50 mΩ maximum |
| Programmable Current Limits | Two settings, Limit A and Limit B; 0–5.1 A range; 8-bit resolution, 20 mA per LSB |
| Overcurrent Shutoff Response | 1 µs |
| Overcurrent Refresh Period | 20–2,550 µs in 10 µs increments; configurable enable/disable |
| Power-On State | All output channels off |
| Front Connector | D-Sub |
| Chassis Power Consumption | Active: 1 W maximum; sleep: 25 µW maximum |
| Weight | 148 g (5.2 oz; 0.33 lb) |
Information About NI-9478
The NI-9478 is designed for supported CompactDAQ and CompactRIO systems and uses a D-Sub front connector. Its outputs switch current toward the common connection, with all channels off at power-up. Two programmable current limits, designated Limit A and Limit B, can be assigned independently to each channel or disabled. Available output current depends on the number of active channels, switching frequency, and applicable module operating limits.
Key Features:
- Sixteen Digital Outputs: Provides sinking channels for compatible industrial control loads.
- Programmable Current Limits: Offers two shared limit settings with per-channel selection.
- Fast Output Updates: Supports 50 µs update timing.
- Flexible Load Supply: Accepts an external supply within the specified 0–50 VDC range.
- Overcurrent Shutoff: Specifies a 1 µs shutoff response when current-limit protection is active.
- Configurable Refresh: Allows automatic overcurrent refresh to be enabled or disabled.
- Defined Startup State: Keeps output channels off when power is first applied.
- C Series Integration: Fits supported CompactDAQ and CompactRIO measurement and control systems.
The NI-9478 delivers the reliability and precision required for digital load switching and programmable actuator control in industrial automation systems.
Description
The National Instruments NI-9478 is a 16-channel C Series sinking digital output module for controlling compatible relays, solenoids, valves, and other industrial loads. It combines 50 µs update timing with programmable current limits, allowing protection settings to match the connected equipment.
Technical Specifications
| Condition | New/Never Used Surplus |
| Brand | National Instruments |
| Category | Industrial I/O |
| Part Number | NI-9478 |
| Subcategory | Digital Output Modules |
| Product Series | C Series |
| Digital Output Channels | 16 |
| Output Type | Sinking |
| Output Update Interval | 50 µs |
| External Supply Range | 0–50 VDC |
| Continuous Current per Channel | All 16 channels on: 1.2 A maximum; four on: 2.5 A maximum; one on: 5 A maximum |
| Switched Current per Channel at 10 kHz | All 16 channels on: 1 A maximum; four on: 2 A maximum; one on: 4 A maximum |
| Switched Current per Channel at 20 kHz | All 16 channels on: 0.75 A maximum; four on: 1.67 A maximum; one on: 3.33 A maximum |
| Output Impedance | 50 mΩ maximum |
| Programmable Current Limits | Two settings, Limit A and Limit B; 0–5.1 A range; 8-bit resolution, 20 mA per LSB |
| Overcurrent Shutoff Response | 1 µs |
| Overcurrent Refresh Period | 20–2,550 µs in 10 µs increments; configurable enable/disable |
| Power-On State | All output channels off |
| Front Connector | D-Sub |
| Chassis Power Consumption | Active: 1 W maximum; sleep: 25 µW maximum |
| Weight | 148 g (5.2 oz; 0.33 lb) |
Information About NI-9478
The NI-9478 is designed for supported CompactDAQ and CompactRIO systems and uses a D-Sub front connector. Its outputs switch current toward the common connection, with all channels off at power-up. Two programmable current limits, designated Limit A and Limit B, can be assigned independently to each channel or disabled. Available output current depends on the number of active channels, switching frequency, and applicable module operating limits.
Key Features:
- Sixteen Digital Outputs: Provides sinking channels for compatible industrial control loads.
- Programmable Current Limits: Offers two shared limit settings with per-channel selection.
- Fast Output Updates: Supports 50 µs update timing.
- Flexible Load Supply: Accepts an external supply within the specified 0–50 VDC range.
- Overcurrent Shutoff: Specifies a 1 µs shutoff response when current-limit protection is active.
- Configurable Refresh: Allows automatic overcurrent refresh to be enabled or disabled.
- Defined Startup State: Keeps output channels off when power is first applied.
- C Series Integration: Fits supported CompactDAQ and CompactRIO measurement and control systems.
The NI-9478 delivers the reliability and precision required for digital load switching and programmable actuator control in industrial automation systems.