National Instruments PXI-4070 FlexDMM Digital Multimeter with Isolated Voltage and Current Digitizer
- Regular price
- $4,085.00
- Sale price
- $4,085.00
- Regular price
-
Couldn't load pickup availability
Product Description P/N: PXI-4070
Description
The National Instruments PXI-4070 is a 6½-digit digital multimeter for precision electrical measurements in automated test systems. Its FlexDMM architecture combines voltage, current, and resistance measurements with isolated waveform acquisition at sampling rates up to 1.8 MS/s.
Technical Specifications
| Condition | New/Never Used Surplus |
| Brand | National Instruments |
| Category | Test and Measurement |
| Part Number | PXI-4070 |
| Subcategory | Digital Multimeters |
| Form Factor | 3U, single-slot PXI/cPCI module |
| DMM Resolution | 6½ digits; up to 7 digits at reduced reading rates |
| Digitizer Resolution | 10–23 bits, sampling-rate dependent |
| Maximum Digitizer Sampling Rate | 1.8 MS/s at 10-bit resolution |
| DC Voltage Ranges | 100 mV, 1 V, 10 V, 100 V, and 300 V |
| DC Current Ranges | 20 mA, 200 mA, and 1 A |
| Resistance Ranges | 100 Ω to 100 MΩ; two-wire and four-wire |
| Frequency Measurement Range | 1 Hz to 500 kHz |
| DMM Reading Rates | Nominally 100 readings/s at 6½ digits; up to 7,000 readings/s at 4½ digits under specified conditions |
| Calibration | Built-in self-calibration; recommended external calibration interval of 2 years |
| Power Consumption | Less than 12 W from the PXI backplane |
| Operating Temperature | 0 °C to +55 °C |
| Dimensions | 20 × 130 × 216 mm (0.8 × 5.1 × 8.5 in.) |
| Weight | 340 g (12 oz) |
Information About PXI-4070
The PXI-4070 is part of the National Instruments FlexDMM family and occupies one slot in a compatible PXI chassis. Its measurement architecture provides selectable resolution and acquisition speed to accommodate steady-state signals and changing waveforms. Two-wire and four-wire resistance modes support component testing, while frequency, period, and diode functions extend its measurement capabilities. Built-in self-calibration references internal voltage and resistance standards without requiring external calibration equipment.
Key Features:
- Precision DMM Measurements: Provides 6½-digit resolution for detailed electrical testing.
- Isolated Waveform Acquisition: Digitizes voltage and current signals at up to 1.8 MS/s, depending on resolution.
- Flexible Resolution: Offers digitizer resolution from 10 to 23 bits according to the selected sampling rate.
- Voltage Measurement Ranges: Includes DC voltage ranges from 100 mV to 300 V.
- Current Measurement: Supports 20 mA, 200 mA, and 1 A current ranges.
- Resistance Testing: Provides two-wire and four-wire measurements with ranges from 100 Ω to 100 MΩ.
- Frequency and Period Functions: Measures signal frequencies from 1 Hz to 500 kHz.
- Internal Self-Calibration: Compensates measurement circuitry using built-in reference standards.
The PXI-4070 delivers the reliability and precision required for automated electrical testing, component characterization, and waveform analysis.
Description
The National Instruments PXI-4070 is a 6½-digit digital multimeter for precision electrical measurements in automated test systems. Its FlexDMM architecture combines voltage, current, and resistance measurements with isolated waveform acquisition at sampling rates up to 1.8 MS/s.
Technical Specifications
| Condition | New/Never Used Surplus |
| Brand | National Instruments |
| Category | Test and Measurement |
| Part Number | PXI-4070 |
| Subcategory | Digital Multimeters |
| Form Factor | 3U, single-slot PXI/cPCI module |
| DMM Resolution | 6½ digits; up to 7 digits at reduced reading rates |
| Digitizer Resolution | 10–23 bits, sampling-rate dependent |
| Maximum Digitizer Sampling Rate | 1.8 MS/s at 10-bit resolution |
| DC Voltage Ranges | 100 mV, 1 V, 10 V, 100 V, and 300 V |
| DC Current Ranges | 20 mA, 200 mA, and 1 A |
| Resistance Ranges | 100 Ω to 100 MΩ; two-wire and four-wire |
| Frequency Measurement Range | 1 Hz to 500 kHz |
| DMM Reading Rates | Nominally 100 readings/s at 6½ digits; up to 7,000 readings/s at 4½ digits under specified conditions |
| Calibration | Built-in self-calibration; recommended external calibration interval of 2 years |
| Power Consumption | Less than 12 W from the PXI backplane |
| Operating Temperature | 0 °C to +55 °C |
| Dimensions | 20 × 130 × 216 mm (0.8 × 5.1 × 8.5 in.) |
| Weight | 340 g (12 oz) |
Information About PXI-4070
The PXI-4070 is part of the National Instruments FlexDMM family and occupies one slot in a compatible PXI chassis. Its measurement architecture provides selectable resolution and acquisition speed to accommodate steady-state signals and changing waveforms. Two-wire and four-wire resistance modes support component testing, while frequency, period, and diode functions extend its measurement capabilities. Built-in self-calibration references internal voltage and resistance standards without requiring external calibration equipment.
Key Features:
- Precision DMM Measurements: Provides 6½-digit resolution for detailed electrical testing.
- Isolated Waveform Acquisition: Digitizes voltage and current signals at up to 1.8 MS/s, depending on resolution.
- Flexible Resolution: Offers digitizer resolution from 10 to 23 bits according to the selected sampling rate.
- Voltage Measurement Ranges: Includes DC voltage ranges from 100 mV to 300 V.
- Current Measurement: Supports 20 mA, 200 mA, and 1 A current ranges.
- Resistance Testing: Provides two-wire and four-wire measurements with ranges from 100 Ω to 100 MΩ.
- Frequency and Period Functions: Measures signal frequencies from 1 Hz to 500 kHz.
- Internal Self-Calibration: Compensates measurement circuitry using built-in reference standards.
The PXI-4070 delivers the reliability and precision required for automated electrical testing, component characterization, and waveform analysis.